1103907432 DR5060 M1_105x148,5 25/04/14 16:00 Page6
Test fabric for color fastness in an unobtrusive part of the garment (inner seam). Do not touch silk or velvet with steam head. Some articles can be steamed better from inside. Heavier fabrics may require repeated steaming. Exercise caution at all times. For very delicate fabrics, you can remove the brush. To avoid damage to clothes, keep a distance of 1,5 inches between the steam head and the fabrics. We recommend that before the first use or after the appliance has been stored for some time to test the burst of steam on an old cloth.
Steaming clothes
Before removing or attaching the steam brush, unplug your appliance and let it cool down.
The Ultra Steam is equipped with a clothes brush
•To attach the accessory, line it up with the steam head. It locks into position with an audible click - fig.9.
•Simply pull on the top of the clothes brush to remove it. You can operate the unit with or without the accessory.
•Hang the creased article of clothing on a clothes hanger
•Pull the clothing tight with one hand and place the appliance over the creased area, beginning at the top of the garment.
As steam is very hot: never attempt to remove creases from a garment while it is being worn, always hang garments on a clothes hanger.
•Gently press the fabric brush against the clothing and move the steambrush down the fabric. Keep pressing the burst of steam button- fig.10.
•The combination of steam and brush will gently remove the creases.
•After treatment, let the garment cool down on the hanger before wearing.
Lint pad
The lint pad must not be used when attached to appliance.
Threads, lint and hair can easily be removed with the lint pad by brushing the clothes slowly from left to right.
The pad can be cleaned by brushing in the opposite direction right to left on a piece of old cloth.
6