Raypak B0109, B0147 Safety, What to do if YOU Smell GAS?, To Turn OFF the Water Heater

Page 5

ABOUT YOUR WATER HEATER

SAFETY

For your safety do not operate this water heater before reading this instruction booklet.

This water heater is supplied with a thermostat, hi-limit thermostat and a pressure relief valve. These devices must not be tampered with or removed. The water heater must not be operated unless each of these devices is fitted and is in working order.

Improper installation, adjustment, alteration, service or maintenance can cause injury or property damage. For assistance or additional information consult your Raypak distributor, qualified installer, or Rheem® Service agent.

The warranty can become void if relief valves or other safety devices are tampered with or if the installation is not in accordance with these instructions.

DO NOT store flammable or combustible materials near the water heater. Flammable liquids (such as petrol), newspapers and similar articles must be kept well away from the water heater and the draught diverter or flue terminal.

DO NOT use aerosols, stain removers and household chemicals near the water heater whilst it is working. Gases from some aerosol sprays, stain removers and household chemicals become corrosive when drawn into a flame.

DO NOT store swimming pool chemicals, household cleaners, etc., near the water heater.

DO NOT place anything on top of the water heater or in contact with the flue terminal. Ensure the flue terminal is not obstructed in any way at any time.

DO NOT use Propane / Butane gas mixtures in a Propane model. A Propane model is designed to operate on Propane only. The use of Propane / Butane mixture, such as automotive LPG fuel, in a Propane model is unsafe and can cause damage to the water heater.

DO NOT operate with panels, covers or guards removed from the water heater.

DO NOT enclose this water heater (applies to external installations only).

If the power supply cord or electrical conduit to the water heater is damaged, it must be replaced by an authorised person in order to avoid a hazard. The power supply cord and plug must be replaced with a genuine replacement part available from Rheem. Phone your nearest Rheem Service Department or Accredited service Agent to arrange for an inspection.

Do not use the water heater if any part has been under water. Immediately call Rheem Service or Accredited service Agent to arrange for an inspection.

WHAT TO DO IF YOU SMELL GAS?

DO NOT try to light any gas appliance.

DO NOT touch any electrical switch.

TURN OFF the gas supply at the gas meter immediately, call your gas supplier or licensed gasfitter. NOTE: Some gases are heavier than air and it may be necessary to check for gas leaks at floor level.

TO TURN OFF THE WATER HEATER

If it is necessary to turn off the water heater:

Switch off the electrical supply at the power outlet to the water heater

NOTE: If the water heater is correctly installed, this will also shut down the circulating pump.

Close the gas isolation valve at the inlet to the water heater.

Close the cold water isolation valve at the inlet to the water heater.

Close the isolation valves on the cold and hot water branches to shut down an individual water heater in a bank (water heating applications only).

5

Image 5
Contents Raypak Water Heaters Patents Contents About Your Water Heater Temperature AdjustmentModel Type HOW HOT should the Water BE?To Turn OFF the Water Heater SafetyWhat to do if YOU Smell GAS? To Turn on the Water Heater HOW do I Know if the Water Heater is Installed CORRECTLY?Does the Water Quality Affect the Water Heater HOW Long will the Water Heater LAST?Mains Pressure HOW Your Water Heater WorksModels On/Off Operation147 On/Off Models Burner IgnitionAll 109 and 147 Hi/Lo Models Diagnostic Features of Electronic Thermostat Save a Service CallNot Enough HOT Water or no HOT Water Water Heater not OperatingPressure Relief Valve Running Burner will not LightExpansion Control Valve Running High GAS BillsRegular Care ServicePressure Relief Valve Expansion Control ValveIndoor Installation InstallationInspection of Equipment Water Heater LocationOutdoor Installation Clearances Indoor InstallationsCombustion / Ventilation AIR Safe TrayInstallation Tank Water Supply High Wind ConditionsCold Water Supply Reducing Heat Losses Water Heating Applications HOT Water Delivery Water Heating ApplicationsHood Conversion Indoor Conversions147 Dimensions and Technical Data109 Models Water Inlet and Outlet Connections PlumbingGAS Inlet Pipe SizesPump Selection Model Pump Branch Size Minimum Manifold HeaderRelief Valve Pressure Rating Relief Valve DrainTypical Water Heating Installation Typical Mechanical Heating InstallationMechanical Heating Water HeatingConnections Electrical Thermostat Setting109 147 On/Off Intermittent Pump OperationBuilding Management System BMS Wiring a Power Flued System to the Water HeaterControl Panel Access Wiring Diagram 109 ON/OFF Models Wiring Diagram 109 HI/LO Models Wiring Diagram 147 ON/OFF Models Wiring Diagram 147 HI/LO Models Multi Pump Option Mechanical Heating Systems Thermostat Location of ControlsGAS Control Rating LabelWhen Handling Safety PrecautionsDuring First Firing of the Water Heater After HandlingOperational Checks CommissioningPRE-START Checks Operating the Water Heater To Reset the Water HeaterGAS Inlet Pressure Burner Pressure AdjustmentGAS Pressure Adjustment 109 On/Off Models 147 Hi/Lo Models 109 Hi/Lo ModelsThermostat Adjustment Temperature Control147 On/Off models AKO Thermostat Set Point Adjustment Differential Adjustment147 Hi/Low Models CTX Thermostat Set Point Adjustment Water Heating Applications 90C maximum HIGH-LIMIT Thermostat AdustmentAnnual Service Procedure Service ProceduresSix Monthly Service Procedure Change of Water Supply Water SuppliesSaturation Index Water Quality Charts Warranty Exclusions Warranty131 031 Australia Raypak Water Heater Warranty Australia only96109147B

B0109, B0147 specifications

Raypak is a well-established name in the world of heating technology, particularly recognized for its efficient and reliable pool and spa heaters. Among their range, the Raypak B0147 and B0109 models stand out for their performance and advanced features designed to enhance user experience.

Both the Raypak B0147 and B0109 models prioritize efficiency, making them ideal choices for residential or commercial swimming pools. They are engineered to deliver reliable heating, ensuring that water maintains a comfortable temperature no matter the season. One of the standout features is their compact design, which allows for easy installation in various settings without requiring extensive modifications to existing infrastructure.

A key characteristic of the Raypak B0147 is its digital control system. This advanced technology allows users to set precise temperatures and monitor heater performance. The intuitive interface makes it user-friendly, facilitating adjustments on-the-fly. The B0109 model, meanwhile, offers robust heating capabilities, featuring a high-output design that can rapidly elevate water temperatures, perfect for pools with significant heat loss.

Both models utilize a copper-fin-tube heat exchanger, which enhances heat transfer efficiency and extends the lifespan of the heater. This design not only improves thermal efficiency but also ensures that users experience lower energy bills over time. They also come equipped with a dependable ignition system, featuring an automatic spark ignition that eliminates the need for pilot lights, leading to improved safety and reliability.

Durability is another hallmark of the Raypak line. Both models are constructed with materials designed to withstand harsh weather conditions and exposure to pool chemicals, ensuring longevity. The corrosion-resistant housings prevent degradation, maintaining the heater's performance over time.

In summary, the Raypak B0147 and B0109 models deliver outstanding heating performance through efficient technology and durable construction. Their user-friendly controls, compact design, and energy-efficient heat exchangers make them excellent choices for pool owners looking to optimize their heating solutions. With Raypak, users can enjoy comfortable water temperatures year-round, backed by reliable technology and impressive efficiency.