Maytag HN51240X Service and Maintenance, OUS Bodily Injury or Property Damage, Or Property Damage

Page 22

Service and Maintenance

Venting

System

Inspection

Burner

Inspection

 

 

At least once a year a visual inspection

should be made of the

[

 

_WARNING

 

 

venting system.You should look for:

 

_Flood

damage to a_may

not be readily

Obstructions

which could cause improper venting. The

visible

or

immediately detectible.

However,

over a

combustion and ventilation

air flow

must not be obstructed.

"period

of

time a flooded water

heater will

create

 

 

 

 

dangerous conditions which can cause DEATH, SERI-

 

 

 

 

OUS BODILY INJURY OR PROPERTY DAMAGE.

Damage or deterioration which could causeimproper vent- ing or leakage of combustion products,

Rusted flakes around top of water heater,

AWARNING

Chemical vapor corrosion of the flue and vent sys-

tem may occur if air for combustion contains certain chemical vapors. Spray can propellants, cleaning sol- vents, refrigerator and air conditioner refrigerants, swimming pool chemicals, calcium and sodium chlo- ride, waxes, bleach, and process chemicals are typi-

[ca compounds wh ch are potent a y corros ve.

Contact the Maytag dealer from whom the appli-

ance was purchased or call Maytag Customer Service

at 1-800-788-8899 for an authorized servicer to replace a flooded water heater. Do not attempt to repair the unit! It must be replaced!

At least once a year a visual inspection should be made of the main burner and pilot burner. The drawing is for your reference.

You should check for sooting which is not normal and will

impair proper combustion.

Obstructed or deteriorated vent systems may pres-

ent a serious health risk or asphyxiation.

NATURAL GAS BURNER - 40 AND 50 GALLON

I]

Be sure

the vent

_erly

connected to I

_)_

prevent

escape

of

dangerous flue

gasses which

 

could cause deadly

asphyxiation.

 

 

AWARNING

If after inspection of the vent system you foundPROPANE(L.R)GASBURNER-40AND50GALLON sooting or deterioration, something is wrong. Call

the local gas utility or Maytag Customer Service at 1-800-788-8899 for an authorized servicer to correct the problem and clean or replace the flue and vent- ing before resuming operation of the water heater. Failure to make corrections can result in a fire, or explosion causing DEATH, SERIOUS BODILY INJURY,

OR PROPERTY DAMAGE.

NATURAL AND PROPANE (L.R) GAS BURNER - 75 GALLON

AWARNING

Soot build-up indicates a problem that requires cor- rection before further use. Turn "OFF" gas to water heater and leave "OFF" until repairs are made, because failure to correct the cause of the sooting can result in a fire or explosion causing DEATH, SERIOUS BODILY INJURY, OR PROPERTY DAMAGE.

22

Image 22
Contents 1VIAYIAG Safety Instructions Awarning3Safety Instructions on Safety InstructionsPremises Safety Instructions AcautionTable of Contents Product Specifications Customer InformationAccessoriesand Tools Needed Accessories1hewater passingout may Instructions for InstallationThan normalandthisresidue,if spilledout,couldcausestaining Watertemper Outletd Mixingvalve Instructions for Installation contdReliefvalve Topview Instructions for Installation contdLocating the New Water Heater Withoutdoor OfclosetHeater Contd For Appliances Located Unconfined Spaces Locating NewCombustion Air and Ventilation For /ppllances Located Confined =pacesInstructions for Installation contd IFigure3IThreadedto TemperatureHotter SweatcouplingOLD Temperature-Pressure Relief ValveShutoff PressureVenttooutdoorsor Filling the Water HeaterDrafthood Drafted ChimneyChemical vapor corrosion of re flue and vent sys Vent PipeinstallationPerlinearfoot Tested before placing the appliance in operationGassupplypiping Flexible ConnectorGAS Piping with ManualInstallation Checklist Instructions for Operation LightingThepilotislit , Releaseknobanditwillpopbackup Servicete chnicianForceorattemptedrepairSTOPReadthesafetyinformationaboveonthislabel Immediatelycallyourservicetechnicianor gasInstructions for Operation contd Temperature RegulationTurn OFF the manualgascontrolvalve to the appliance Be sure Vent Erly Connected to Prevent Service and MaintenanceOUS Bodily Injury or Property Damage Gasses which Could cause deadly AsphyxiationGasControl Valve & Burner Assembly Replacement Information Service and Maintenance contdBurner Cleaning Housekeeping Temperature-Pressure Relief Drain Valve WasherHandlassemblyand CAP Washer DischargepipeSMOKE/ODOR TroubleshootingStart Up Conditions Thermal ExpansionTroubleshooting contd AIR in HOT Water Faucets AwarningOperational Conditions contd Leakage Checkpoints KCAUTIONETC Repair Parts ListETC5× Repair Parts List contd Model NumbersHN41240X HN51240X HP41240X HP51240X HN41250X HN51250X Repair Parts List contdOdel Numbers KEY Part Descripti on Part NumbersRepair Parts List contd Model Numbers KEY Part Description Part Numbers16 //i MOD EL Numbers KEY 660 0 110 Warranty0002 9164

HN41240X, HN51240X specifications

The Maytag HN51240X and HN41240X are two reliable and efficient washers, offering exceptional performance for those seeking durability and functionality in their laundry routines. These models are designed with a blend of innovative technologies and user-friendly features, making them standout options in the semi-professional segment.

The HN51240X comes equipped with a powerful motor that provides impressive wash action without compromising on efficiency. Its high-capacity drum allows users to tackle large loads easily, perfect for families or individuals with significant laundry needs. Meanwhile, the HN41240X, although slightly smaller, still boasts an impressive capacity that ensures thorough cleaning and better water usage.

Both models feature Maytag’s exclusive PowerWash cycle, which is engineered to tackle tough stains by combining extra agitation, water, and heat. This results in clothes coming out cleaner, even when dealing with heavy soil and grime. Additionally, they utilize the Advanced Moisture Sensing technology that detects moisture levels and adjusts drying time accordingly, preventing over-drying and preserving fabric quality.

The construction of the HN51240X and HN41240X emphasizes durability. Their robust design includes a stainless steel wash basket and a solid, heavy-duty frame, which not only helps reduce vibrations during operation but also ensures long-lasting performance. The machines are designed to withstand the rigors of daily use while maintaining their efficiency and effectiveness.

Another notable characteristic of these models is their energy efficiency. They are ENERGY STAR certified, meaning they meet strict energy efficiency guidelines set by the Environmental Protection Agency. This leads to lower energy bills while still delivering the performance and cleaning power users expect from a Maytag appliance.

For added convenience, both washers feature a variety of wash cycles and options, allowing users to customize their laundry experience. From delicate fabrics to bulky bedding, there is a setting suitable for every type of load. Their intuitive controls make operation straightforward, perfect for users of all experience levels.

In summary, the Maytag HN51240X and HN41240X stand out as quality washing machines that combine innovative technology with user-centric design features. They are perfect for those who value efficiency, durability, and powerful cleaning capabilities in their laundry appliances.