Maytag HN41240X, HN51240X manual Service and Maintenance contd, Burner Cleaning

Page 23

Service and Maintenance (cont'd)

L.P.GasControl Valve & Burner Assembly Replacement

Information

AWARNING

PROPANE (L.P.) GAS CONTROL VALVE AN BURNER ASSEMBLY REPLACEMENT INFORMATION.

For Propane (L.R) Gas Models Only:

Your water heater is equipped with a Propane (L.R) gas control valve and a main burner assembly with left hand threads for the following fittings and their

connections.

•The connection between the manifold and the gas control valve (A to B) are left hand threads.

•The connection between the main burner orifice and the mani- fold (C to D) are left hand threads,

For ordering these replacement parts, please refer to the "Repair Parts List" section of this manual,

A_

C

Burner Cleaning

In the event your burner needs cleaning, usethe following instructions:

If inspection of the burner shows that cleaning is required,

turn the gas control knob clockwise ((_",) to the "OFF" position, depressing slightly.

NOTE: The knob cannot be turned from "PILOT" to

"OFF" unless knob is depressed slighdy. DO NOT FORCE.

Loose deposits on or around the burner can be removed by carefully using the hose of a vacuum cleaner inserted through the access door of the water heater. If the burner needs to be

removed for additional cleaning, call Maytag Customer Service at 1-800-788 8899 for an authorized servicer to remove and

clean the burner and correct the problem that required the burner to be cleaned.

The water heater should be drained if being shut down during freezing temperatures. Also periodic draining and cleaning of sedimentDrainingfrom the tank may be necessary.

•Turn the gas control knob to the "OFF" position.

•CLOSE the cold water inlet valve to the water heater.

•OPEN a nearby hot water faucet and leave open to allow for draining.

•Connect a hose to the drain valve and terminate to an ade- quate drain.

•OPEN the water heater drain valve to allow for tank

draining.

NOTE: If the water heater is going to be shut down and drained for an extended period, the drain valve should be left open with hose connected allowing water to terminate to an adequate drain.

•Close the drain valve.

•Follow instructions in the "Filling The Water Heater" section.

•Follow the lighting instructions in the "Lighting" section to restart the water heater.

23

Page 22 Page 24
Image 23
Page 22 Page 24
Contents 1VIAYIAG Awarning Safety InstructionsPremises Safety Instructions3Safety Instructions on Acaution Safety InstructionsTable of Contents Customer Information Product SpecificationsAccessories Accessoriesand Tools NeededThan normalandthisresidue,if spilledout,couldcausestaining Instructions for Installation1hewater passingout may Reliefvalve Instructions for Installation contdWatertemper Outletd Mixingvalve Withoutdoor Ofcloset Instructions for Installation contdLocating the New Water Heater TopviewFor /ppllances Located Confined =paces Locating NewCombustion Air and Ventilation Heater Contd For Appliances Located Unconfined SpacesIFigure3I Instructions for Installation contdSweatcoupling TemperatureHotter ThreadedtoPressure Temperature-Pressure Relief ValveShutoff OLDDrafted Chimney Filling the Water HeaterDrafthood VenttooutdoorsorTested before placing the appliance in operation Vent PipeinstallationPerlinearfoot Chemical vapor corrosion of re flue and vent sysManual Flexible ConnectorGAS Piping with GassupplypipingInstallation Checklist Lighting Instructions for OperationImmediatelycallyourservicetechnicianor gas Servicete chnicianForceorattemptedrepairSTOPReadthesafetyinformationaboveonthislabel Thepilotislit , ReleaseknobanditwillpopbackupTurn OFF the manualgascontrolvalve to the appliance Temperature RegulationInstructions for Operation contd Gasses which Could cause deadly Asphyxiation Service and MaintenanceOUS Bodily Injury or Property Damage Be sure Vent Erly Connected to PreventBurner Cleaning Service and Maintenance contdGasControl Valve & Burner Assembly Replacement Information Dischargepipe Temperature-Pressure Relief Drain Valve WasherHandlassemblyand CAP Washer HousekeepingThermal Expansion TroubleshootingStart Up Conditions SMOKE/ODORAIR in HOT Water Faucets Awarning Troubleshooting contdOperational Conditions contd KCAUTION Leakage CheckpointsETC5× Repair Parts ListETC Model Numbers Repair Parts List contdPart Descripti on Part Numbers Repair Parts List contdOdel Numbers KEY HN41240X HN51240X HP41240X HP51240X HN41250X HN51250XRepair Parts List contd Part Description Part Numbers Model Numbers KEY16 //i MOD EL Numbers KEY 0002 9164 Warranty660 0 110

HN41240X, HN51240X specifications

The Maytag HN51240X and HN41240X are two reliable and efficient washers, offering exceptional performance for those seeking durability and functionality in their laundry routines. These models are designed with a blend of innovative technologies and user-friendly features, making them standout options in the semi-professional segment.

The HN51240X comes equipped with a powerful motor that provides impressive wash action without compromising on efficiency. Its high-capacity drum allows users to tackle large loads easily, perfect for families or individuals with significant laundry needs. Meanwhile, the HN41240X, although slightly smaller, still boasts an impressive capacity that ensures thorough cleaning and better water usage.

Both models feature Maytag’s exclusive PowerWash cycle, which is engineered to tackle tough stains by combining extra agitation, water, and heat. This results in clothes coming out cleaner, even when dealing with heavy soil and grime. Additionally, they utilize the Advanced Moisture Sensing technology that detects moisture levels and adjusts drying time accordingly, preventing over-drying and preserving fabric quality.

The construction of the HN51240X and HN41240X emphasizes durability. Their robust design includes a stainless steel wash basket and a solid, heavy-duty frame, which not only helps reduce vibrations during operation but also ensures long-lasting performance. The machines are designed to withstand the rigors of daily use while maintaining their efficiency and effectiveness.

Another notable characteristic of these models is their energy efficiency. They are ENERGY STAR certified, meaning they meet strict energy efficiency guidelines set by the Environmental Protection Agency. This leads to lower energy bills while still delivering the performance and cleaning power users expect from a Maytag appliance.

For added convenience, both washers feature a variety of wash cycles and options, allowing users to customize their laundry experience. From delicate fabrics to bulky bedding, there is a setting suitable for every type of load. Their intuitive controls make operation straightforward, perfect for users of all experience levels.

In summary, the Maytag HN51240X and HN41240X stand out as quality washing machines that combine innovative technology with user-centric design features. They are perfect for those who value efficiency, durability, and powerful cleaning capabilities in their laundry appliances.
Top Page Image Contents