GE AGQ12DK About the controls on the air conditioner, Consumer Support, Remote Control

Operating Instructions Safety Instructions

About the controls on the air conditioner.

Features and appearance will vary.

Timer on

Cool on

Fan

Only on

Air Conditioner Controls Remote Control

Controls

Tips Installation Instructions

ON/OFF Pad

Turns air conditioner on and off.

Display

Shows the set temperature or time remaining on timer.

Mode

Use to set the air conditioner to Cool or Fan mode.

Increase ▲ /Decrease ▼ Pads

Use to set temperature when in Cool mode.

Fan Speed Pad

Use to set the fan speed to LOW (F1), MED (F2)

or HIGH (F3).

Timer Pad

ON—When the air conditioner is off, it can be set to automatically come on in 1 to 12 hours at its previous setting. Each touch of the Timer pad or the INCREASE ▲ / DECREASE ▼ pads will set the timer in hours.

OFF—When the air conditioner is on, it can be set to automatically turn off in 1 to 12 hours. Each touch of the Timer pad or the INCREASE ▲ / DECREASE ▼ pads will set the timer in hours.

To cancel the timer, press the Timer pad until the display time disappears.

Remote Control Signal Receiver

Troubleshooting

Do Not Operate in Freezing Outdoor Conditions

This cool-only air conditioner was not designed for freezing outdoor conditions. It must not be used in freezing outdoor conditions.

Consumer Support

Remote Control

■To ensure proper operation, aim the remote control at the signal receiver on the air conditioner.

■The remote control signal has a range of up to 20 feet.

■Make sure nothing is between the air conditioner and the remote control that could block the signal.

■Make sure batteries are fresh and installed correctly as indicated on the remote control.

4