POWER CONTROL
RADIO FREQUENCY REMOTE-CONTROL
- HOSE
1.Vacuum cleaner ON/OFF( 
)
Press the ON/OFF button to operate the vacuum cleaner. Press again to stop the vacuum cleaner.
2.Vaccum cleaner suction(-/+)
Press the SUCTION (+/) button to increase or decrease the suction power. Each time you press the button, you gradually increase the suction power. After the suction power reaches its maximum, the next time you press the button, you return the suction power to its minimum.
3.BRUSH ON/OFF
transmitter
Handle Control
The cleaner is controlled by radio
frequency signals.
02 OPERATING THE VACUUM
Press the BRUSH ON/OFF button to operate the Power Brush. Press again to stop the Power Brush.
Don’t cover the handle transmitter when you use a handle control button.
FCC NOTICE
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:
1.This device may not cause harmful interference, and
2.This device must accept any interference received, including interference that may cause undesired operation.
- BODY
Press the power ON/OFF button repeatedly to start and to stop the vacuum cleaner.
(OFF → ON → OFF)
If the remote handle control is not working, the cleaner can be operated using the ON/OFF button on the body of the machine.
1
3
2
1
2
3
The ON/OFF button operates the vacuum cleanner or stops it.
The RADIO FREQUENCY light indicates the part that receives the RADIO FREQUENCY signal from the handle control.
The fi lter light is illuminated when the dust pack requires checking or emptying. An audio signal will also sound.
operating the vacuum _7