Pelco C3433M (3/07) manual How to Use the Device Utility, Installing the IP110 Device Utility

Page 15

How to Use the Device Utility

Use the Device Utility software to identify the IP address, check the status of the device, and update ﬁrmware.

FIRMWARE VERSION

UPDATE FIELD

CAMERA NAME IP ADDRESS

MAC ADDRESS

STATUS

REMOVE OFFLINE DEVICES

Figure 10. Pelco Device Utility Software

INSTALLING THE IP110 DEVICE UTILITY

To install the IP110 Device Utility software, complete the following steps:

1.Download the Pelco Device Utility available on the CD shipped with the product.

2.Create a Pelco Device Utility directory on your hard drive.

3.Copy PelcoDeviceUtility.zip to the directory.

4.Click on the PelcoDeviceUtility.zip ﬁle. Extract the ﬁles.

5.Double click on DeviceUtility.html to open the Device Utility. Wait a few seconds for the software to locate the IP110.

NOTE: You must have the JRE installed on your machine to view the Device Utility. If you get an error message or see an X displayed on the page install JavaSE JRE available on the CD (shipped with the product) or at http://www.java.com/en/download/.

C3433M (3/07)

15

Image 15

Contents IP110 Series Camclosure Web Browser Contents Video QUALITY-CAUTION Regarding User Selected Options IP Address Settings WelcomeGetting Started Using a Web Browser Accessing the CameraTo access the IP110 do the following Open the Web browser Home Screen IP110 Main MenuHOW to Capture a Still Image Image Rate SettingFull Screen Mode Scalable Stream ModeSettings Screen General TABChange the Device Name Network TAB How to Change the Network SettingsUsers Tab Users TABHow to Add a New User How to Modify a User ProﬁleHow to Delete a User Proﬁle Roles TAB How to Create a New RoleHow to Delete a Role How to Modify an Existing RoleFor help with the system select the Online help menu Edit Profile ScreenHelp Screen Sign OUT ScreenInstalling the IP110 Device Utility How to Use the Device UtilityUpdating Firmware Update FirmwareSelect the ﬁle to upload and then click the open button Update StatusDevice Utility Accessing the Camera Troubleshooting Router with an n-Port switch Camera not No camera powerGreen LED during camera power-up Network not Faulty cable connectionSpeciﬁcations Interlace Signal System Ntsc or PAL Scanning SystemImaging Device Inch imager Dynamic Range DB typical/120 dB maximumProduct Warranty and Return Information ISO9001