Pelco C3433M (3/07) manual Imaging Device Inch imager Dynamic Range, DB typical/120 dB maximum

Page 22

ENVIRONMENTAL
Environment					Low temperature, indoor/outdoor
Operating Temperature					-50° to 122°F (-46° to 50°C); de-ices to 25°F (-4°C)
Thermostat Operation					Heater is thermostatically controlled to activate <41°F (<5°C)
CAMERA
Service Connector					3-conductor, 2.5 mm connector for video output to optional ICS-SC cable
Imaging Device					1/3-inch imager
Dynamic Range
DW/CW					102 dB typical/120 dB maximum
Signal System					NTSC or PAL
Scanning System
DW/CW					2:1 interlace/progressive scanning (DIP switch selectable)
DN/CH					2:1 interlace
Synchronization					Internal
Electronic Shutter Range					Auto (1/15 - 1/22,000)
LENS
Type					Varifocal with auto iris
Focal Length					3.0 mm ~ 9.5 mm
					9.0 mm ~ 22.0 mm
Format Size					1/3-inch
Operation
Iris					Auto (DC-drive)
Focus					Manual
Zoom					Manual
					Ø 5.50
						(13.97)

3.63	3.03
(9.22)	(7.70)

5.28

(13.41)

Ø3.79

(9.63)

NOTE: VALUES IN PARENTHESES ARE CENTIMETERS; ALL OTHERS ARE INCHES.

(Design and product speciﬁcations subject to change without notice.)

22	C3433M (3/07)

Image 22

Contents IP110 Series Camclosure Web Browser Contents Video QUALITY-CAUTION Regarding User Selected Options Welcome IP Address SettingsGetting Started Accessing the Camera Using a Web BrowserTo access the IP110 do the following Open the Web browser IP110 Main Menu Home ScreenScalable Stream Mode Image Rate SettingFull Screen Mode HOW to Capture a Still ImageGeneral TAB Settings ScreenChange the Device Name How to Change the Network Settings Network TABUsers TAB Users TabHow to Modify a User Proﬁle How to Add a New UserHow to Delete a User Proﬁle How to Create a New Role Roles TABHow to Modify an Existing Role How to Delete a RoleSign OUT Screen Edit Profile ScreenHelp Screen For help with the system select the Online help menuHow to Use the Device Utility Installing the IP110 Device UtilityUpdate Firmware Updating FirmwareUpdate Status Select the ﬁle to upload and then click the open buttonDevice Utility Accessing the Camera Troubleshooting Network not Faulty cable connection Camera not No camera powerGreen LED during camera power-up Router with an n-Port switchSpeciﬁcations DB typical/120 dB maximum Signal System Ntsc or PAL Scanning SystemImaging Device Inch imager Dynamic Range InterlaceProduct Warranty and Return Information ISO9001