Pelco C3433M (3/07) manual Device Utility Accessing the Camera

Page 18

DEVICE UTILITY: ACCESSING THE CAMERA

To access the IP110 using the Device Utility, do the following:

1.Open the Pelco Device Utility.

2.Select the device to view, and then double click on the listed device. The Login screen opens. Refer to Accessing the Camera on page 5, for more information.

18	C3433M (3/07)

Image 18

Contents IP110 Series Camclosure Web Browser Contents Video QUALITY-CAUTION Regarding User Selected Options IP Address Settings WelcomeGetting Started Using a Web Browser Accessing the CameraTo access the IP110 do the following Open the Web browser IP110 Main Menu Home ScreenScalable Stream Mode Image Rate SettingFull Screen Mode HOW to Capture a Still ImageSettings Screen General TABChange the Device Name How to Change the Network Settings Network TABUsers TAB Users TabHow to Add a New User How to Modify a User ProﬁleHow to Delete a User Proﬁle How to Create a New Role Roles TABHow to Modify an Existing Role How to Delete a RoleSign OUT Screen Edit Profile ScreenHelp Screen For help with the system select the Online help menuHow to Use the Device Utility Installing the IP110 Device UtilityUpdate Firmware Updating FirmwareUpdate Status Select the ﬁle to upload and then click the open buttonDevice Utility Accessing the Camera Troubleshooting Network not Faulty cable connection Camera not No camera powerGreen LED during camera power-up Router with an n-Port switchSpeciﬁcations DB typical/120 dB maximum Signal System Ntsc or PAL Scanning SystemImaging Device Inch imager Dynamic Range InterlaceProduct Warranty and Return Information ISO9001