NETWORK TAB
Use the Network tab to change network settings including the host name, turn DHCP (Dynamic Host Configuration Protocol) setting on/off, or set a static IP address.
DHCP
HARDWARE ADDRESS HOST NAME
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| SUBNET MASK | GATEWAY |
|
|
| |||
|
|
|
|
| |||||
IP ADDRESS | DNS SERVERS |
|
| ||||||
|
| ||||||||
Figure 4. Network Tab
How to Change the Network Settings
1.Click Settings in the main menu. The IP110 settings menu opens.
2.Click the Network tab.
3.Go to DHCP and select Off to turn off the Dynamic Host Configuration Protocol.
4.Change the following network settings as required:
•IP Address: The address of the device connected to the network.
•Subnet Mask: Determines the network segment packet the IP protocol uses.
•Gateway: Converts packets from one protocol to another.
•DNS Server Address: The address of the dedicated server that provides the name for the IP network. The server assigns names for Web sites and network resources into numeric IP addresses.
5.Click Save to save the new network settings.
NOTE: Contact your network administrator to avoid any network conflicts before changing network settings.
C3433M (3/07) | 9 |