Pelco C3433M (3/07) manual Updating Firmware, Update Firmware

Page 16

UPDATING FIRMWARE

IMPORTANT: Perform system upgrades only when necessary. Firmware upgrades do not need to be performed if the system is operating properly.

Updated ﬁrmware and language ﬁles can be uploaded to the IP110 Camclosure. To update ﬁrmware, complete the following steps:

1.Open the Pelco Device Utility software.

2.Check the Update ﬁeld for device or devices that need to be updated.

3.Click the Update Firmware button.

SELECT DEVICE TO UPDATE

UPDATE FIRMWARE BUTTON

Figure 11. Update Firmware

16	C3433M (3/07)

Image 16

Contents IP110 Series Camclosure Web Browser Contents Video QUALITY-CAUTION Regarding User Selected Options Welcome IP Address SettingsGetting Started Accessing the Camera Using a Web BrowserTo access the IP110 do the following Open the Web browser IP110 Main Menu Home ScreenImage Rate Setting Full Screen ModeScalable Stream Mode HOW to Capture a Still ImageGeneral TAB Settings ScreenChange the Device Name How to Change the Network Settings Network TABUsers TAB Users TabHow to Modify a User Proﬁle How to Add a New UserHow to Delete a User Proﬁle How to Create a New Role Roles TABHow to Modify an Existing Role How to Delete a RoleEdit Profile Screen Help ScreenSign OUT Screen For help with the system select the Online help menuHow to Use the Device Utility Installing the IP110 Device UtilityUpdate Firmware Updating FirmwareUpdate Status Select the ﬁle to upload and then click the open buttonDevice Utility Accessing the Camera Troubleshooting Camera not No camera power Green LED during camera power-upNetwork not Faulty cable connection Router with an n-Port switchSpeciﬁcations Signal System Ntsc or PAL Scanning System Imaging Device Inch imager Dynamic RangeDB typical/120 dB maximum InterlaceProduct Warranty and Return Information ISO9001