Pelco IV SE manual Window Blanking, To set a window blanking area

Page 54

WINDOW BLANKING

PELCO SPECTRA IV SE HORIZON

LANGUAGE

<SYSTEM INFORMATION> <DISPLAY SETUP> <DOME SETTINGS>

RESET CAMERA

CYCLE CAMERA POWER

REBOOT SYSTEM

EXIT

DOME SETTINGS

<CAMERA>

<MOTION> <POWER UP> <LINE SYNC> <PRESETS> <PATTERNS> <ZONES>

<WINDOW BLANKING> <ALARMS>

<AUX>

<TITLE TEXT> <CLEAR> <PASSWORD> <CLOCK> <EVENT>

BACK

EXIT

Window blanking allows a user to program four-sided areas that cannot be viewed by the operator of the dome system. A blanked area will move with pan and tilt functions and automatically adjust in size as the lens zooms telephoto and wide.

The Spectra IV SE Horizon dome system has eight available user-defined window blanks and two styles of window blanking: Gray and Smear. If the style is set to Gray, the blanked area is covered with a solid gray window. If Smear is selected images behind the window will be noticeable but not distinguishable.

To set a window blanking area:

1.Use the joystick to position the cursor beside WINDOW BLANKING. Press Iris Open. The WINDOW BLANKING menu appears on the screen.

2.Move the joystick to position the cursor beside SET WINDOWS. Press Iris Open to enter.

3.Position the cursor beside WINDOW NUMBER. Press Iris Open. The cursor moves to the right.

4.Move the joystick up or down to view selections. Press Iris Open to enter selection.

5.Use the joystick to position the cursor beside EDIT WINDOW LOCATION. Press Iris Open, and then follow the instructions that appear on the screen. When all four corners are set, the SET WINDOWS menu reappears, the blanked area is displayed, and the ENABLE WINDOW option is set to YES.

WINDOW BLANKING

STYLE

BLANK ALL ABOVE

BLANK ALL BELOW

<SET WINDOWS>

BACK

EXIT

NOTES:

•Use the inside corner of the window selection tool as a guide when selecting the upper left, upper right, bottom right, and bottom left corners of the window.

•Set windows are not visible when editing a new window location.

INSIDE CORNER

SET WINDOWS

WINDOW NUMBER

<EDIT WINDOW LOCATION> <EDIT WINDOW ZOOM> <EDIT SCHEDULE>

ENABLE WINDOW

REVERSE

CLEAR WINDOW

BACK

EXIT

54

C3434M-A (9/07)

Page 53 Page 55
Image 54
Page 53 Page 55
Contents Spectra IV SE Horizon Series Dome Drive Page Contents Shutter Speed Scheduled Events Welcome Installation Switch SettingsSW1 Receiver Address SW2 Switches 6-8 Baud Settings SW2 Switches 1-3 Special System SettingsSW2 Switches 4-5 Serial Port Settings BaudDome Drive Installation Dome Drive InstallationTable A. Switch Settings for SW1 P-Type Control Table B. Switch Settings for SW1 D-Type Control Spectra Switch Setting AddressTable B. Switch Settings for SW1 D-Type Control 100 106 141 176 211 246 Configure Done Getting StartedHow to Operate Your Dome System Accessing Main Menu Preset Quick Programming GuideCM9500 Press the Spot Monitor keyEndura Workstation VCD5000Spectra IV SE Horizon Menu Tree Dome Settings Camera Language System Information Back Exit AdditionalDisplay Setup Label Positions Type of Lighting Dome SettingsCamera Auto FocusLOW Light Limit Zoom LimitZoom Speed HighIR CUT Filter YESDark AGC Limit Advanced Camera SettingsShutter Speed Numeric ValueAuto iris is disabled, and control is always manual Determined by the auto iris level settingAuto Iris Auto White Balance Level. Sharpness level settings range fromAuto Sharpness GainThere are two backlight compensation settings Backlight Compensation BLCSet the video output to one of the following Video LevelWide Dynamic Range NormalImage Enhancement DefaultElectronic Image Stabilization EnhancedAuto Flip Motion SettingsThere are two auto flip modes On default Proportional PANAuto Scan PresetPark Time Frame ScanScan Speed Preset Freeze FrameThere are three preset freeze frame settings Image is never frozenScan Limit StopsManual Stop is reachedAzimuth Zero Power UP Power UP ActionNone Settings range from zero to 359 degrees Line SyncDome synchronizes to the internal clock Presets Following presets are predefined for specific functionsBecomes Pelco Spectra IV SE Horizon Language Medium default Average sensitivity Enable Motion DetectionFollowing are the settings for motion detection OFF default Edit Detection AreasMotion Detection Areas AUX Time Activate AUX CommandTriggers a command to AUX Edit SchedulePatterns Zones Window Blanking To set a window blanking areaReverse Clear WindowBlank ALL ABOVE/BLANK ALL below Resume AlarmsReset Delay SequenceMEDIUM/LOW Normally open AUX LatchingMomentary Title Text Edit Title TextClear Password Power Line ClockFixed Date Repeat steps b-d for the ending date and time Follow the instructions in for Fixed DATE, adding Week Event Event TypeEvent Label Edit Event Label Edit Event LabelEdit Event Date is in the list of holidaysHolidays have no effect on the event Clear Event List EventHoliday Edit Holiday Holiday occurs on the same date each yearApril Clear Holiday List HolidaysScheduled Events Use this page to record scheduled eventsCycle Camera Power Reset, Cycle Power, RebootReset Camera Reboot SystemSoftware/Language File Upload Suggested Preventative Maintenance Specifications NtscInterlace Inch CCD PAL Product Warranty and Return Information ISO9001
Related manuals
Manual 96 pages 46.76 Kb

IV SE specifications

The Pelco IV SE is a leading-edge camera system designed specifically for surveillance applications that demand high-quality imaging, flexibility, and robustness. With its sleek design and advanced features, the Pelco IV SE is an essential tool for security professionals aiming to enhance situational awareness and improve monitoring capabilities.

One of the key features of the Pelco IV SE is its impressive image quality. The camera is equipped with advanced image sensors that provide high resolution and clarity, ensuring that critical details are captured even in challenging lighting conditions. Its enhanced low-light performance enables efficient operation in darkness, making it suitable for both day and night surveillance tasks.

In terms of technology, the Pelco IV SE incorporates advanced video compression algorithms, such as H.264 and H.265. These technologies allow for efficient bandwidth utilization while maintaining video quality, enabling long-term storage of data without sacrificing clarity. The camera also supports Power over Ethernet (PoE), simplifying installation by allowing power and data to be transmitted over a single cable, reducing clutter and setup complexity.

Another standout characteristic is its flexibility. The Pelco IV SE is designed for various mounting options, including wall, ceiling, and pole mounts, making it adaptable for different environments and surveillance needs. The camera features a varifocal lens, allowing users to adjust the field of view to capture images from different distances, thus optimizing surveillance coverage.

Additionally, the Pelco IV SE integrates seamlessly with existing security systems, providing compatibility with various video management software platforms. This interoperability ensures that users can incorporate the camera into their broader security infrastructure without significant disruption.

The device also comes with intelligent video analytics capabilities, such as motion detection and facial recognition, enhancing its functionality. These features allow for proactive monitoring, where alerts can be set up for suspicious activities, ensuring timely responses to potential threats.

With its robust construction, the Pelco IV SE is built to withstand harsh environmental conditions. It adheres to specific IP ratings, indicating its resistance to dust and water, making it an ideal choice for both indoor and outdoor surveillance applications. In summary, the Pelco IV SE is a versatile, high-performance camera that combines advanced imaging capabilities, reliable technology, and extensive adaptability to meet the evolving demands of modern security surveillance.
Top Page Image Contents