Pelco Not ICS110-CW manual Service Connector

Page 22

Service Connector

Service Connector

The ICS110-CW Series Camclosure integrated camera system includes a service connector that outputs camera video. Use it at the installation site to set up the ﬁeld of view and focus the camera.

SERVICE

CONNECTOR

Figure 14. Service Connector

Pelco offers two optional items that plug directly into the service connector. Before using either option, you must loosen the tamper-resistant screws to remove the trim ring from the back box. Use the supplied 1/8-inch hollow screwdriver bit.

The CST150 has a 3-foot (0.9 m) cable and microdisplay for viewing camera video. Plug it into the service connector and view the video.

NOTE: The three buttons on the CST150 are not used with the ICS110-CW.

The ICS090-SC has a 4-foot (1.2 m) cable with a service connector and a BNC connector. Plug the service connector into the unit. Then connect the other end to any standard BNC (VIDEO IN) connector on a monitor.

22	C3406M-D (1/07)

Image 22

Contents ICS110-CW Series Camclosure C3406M-D 1/07Integrated Camera System Wide Dynamic Range WDR I N S T A L L A T I O NPage Varifocal Lens Zoom and Focus Adjustments ContentsSide Conduit Installation Vertical Phase Adjustment 24 VAC Operation OnlyList of Illustrations Regulatory Notices RADIO AND TELEVISION INTERFERENCEDescription MODELSSHOWN ACTUAL SIZE Figure 1. Package ComponentsBASIC SURFACE INSTALLATION Cover and Back Box InstallationUNSHIELDED TWISTED PAIR UTP VIDEO 4S ELECTRICAL BOX INSTALLATION ADAPTER PLATE 404 PLASTER RING INSTALLATION SIDE CONDUIT INSTALLATION COVER 0.75-INCH CONDUIT CONNECTOR BACK BOX REMOVE CONDUIT PLUG 8-32 X 0.375-INCH PHILLIPS PAN HEAD SCREWS WITH WASHERS SUPPLIEDCamera Module MODULE REMOVALFigure 7. Back Box Connectors HEATER BOARD CONNECTOR SERVICECAMERA CONNECTORCONNECTORMODULE INSTALLATION CAMERA ORIENTATIONCamera Adjustments VARIFOCAL LENS ZOOM AND FOCUS ADJUSTMENTSSWITCH SETTINGS VERTICAL PHASE ADJUSTMENT 24 VAC OPERATION ONLY ADJUSTING THE VERTICAL PHASEFigure 12. Positioning the Camera Camera PositioningTilt RotationInstall Dome and Trim Ring Service Connector 1 2.5 mm monaural headphone plug 1 CPM 88 miniature coaxial connector CAMERA SpeciﬁcationsLENS General BACKBOXElectrical Design and product speciﬁcations subject to change without noticeC3406M-D 1/07 REVISION HISTORY PRODUCT WARRANTY AND RETURN INFORMATIONWARRANTY RETURNSTel 1-559/292-1981 Fax 1-559/348-1120 Worldwide Headquarters 3500 Pelco Way Clovis, California 93612 USAUSA & Canada Tel 800/289-9100 Fax 800/289-9150 International ISO9001