SkyLink 91562-01, 91561-01, 91558-01A service manual Later Sportster Models, Flhr Touring Models

Page 5

is06715

2

3

1

is06716

1.Transmitter mounting location

2.Wires to headlamp

3.Ignition module

Figure 7. Transmitter Mounting and Wire Routing, (2003

or Earlier Sportster Models)

2004 and Later Sportster Models

1.Remove the fuel tank. See the correct section (Carbureted or EFI Engine) of the service manual.

2.Remove the electrical side cover, located on the left side of the motorcycle near the battery.

3.See Figure 27. Position the transmitter (1) behind the electrical side cover. Orient the transmitter so the printed circuit side faces away from the battery, and fasten the transmitter to the wire harness next to the main fuse holder using cable straps (8) from the kit.

Proceed to the Harness Connection section.

FLHR Touring Models

1.Remove the headlamp from the nacelle per the instructions in the service manual.

2.Remove the liner from the adhesive backing of the tape pad on the transmitter.

3.See Figure 8. Mount the transmitter to the right side of the frame near the fork tube.

Proceed to the Harness Connection section.

Figure 8. Transmitter Mounting Near Fork Tube (FLHR)

FLHT, FLHX and FLTR Touring Models;Trike Models

1.Remove the outer fairing per the instructions in the service manual.

2.Remove the liner from the adhesive backing of the tape pad on the transmitter.

3.See Figure 9 (FLHT, FLHX models) or Figure 10 (FLTR models). Mount the transmitter to the upper inside of the fairing.

Proceed to the Harness Connection section.

is06717

1

4

 

2

6

3

5

 

1.Mount transmitter to fairing

2.Headlamp connector

3.Orange/white wire

4.Black wire

5.White wire

6.Yellow wire

Figure 9. Wires for Transmitter Connections (FLHT/X)

-J02028

5 of 16

Page 4 Page 6
Image 5
Page 4 Page 6
Contents FCC Notices GeneralVehicle Preparation Receiver InstallationFor Dyna, Softail and Sportster models Transmitter InstallationDyna Models Earlier SoftailsLater Softail Deuce Fxstd Later Softails, Except Deuce FxstdSportster Models Rear wheel and tire Rear fork TransmitterFLHT, Flhx and Fltr Touring ModelsTrike Models Later Sportster ModelsFlhr Touring Models Rod Models Transmitter Fuse block wire harnessLater V-Rod Models Louvered cover Tab ScrewGeneral Harness ConnectionLater Softail Models Touring and Trike ModelsInto 1 splice Black Lead Connection to GroundEarlier Softail Models Ground screws black wire ORANGE/WHITE Lead Connection to Switched Power SourceEarlier Dyna Models Later Dyna ModelsSoftail Models Fuse Block Adapter Wire Dyna and SoftailWire Splice Locations 2002-2003 V-Rod Power Connections Sportster ModelsYellow Andwhite Lead Connections to Headlamp Wire Splice Locations 2005 and Later V-RodIs06727 Reset the Receiver TroubleshootingNO. Proceed to Reset the Receiver Receiver and Transmitter ProgrammingService Parts Not sold separately

91562-01, 91558-01A, 91561-01 specifications

SkyLink has made a remarkable entry into the realm of wireless communication devices with its innovative models: the SkyLink 91562-01, 91558-01A, and 91561-01. Each of these devices is tailored to meet the demands of modern security systems, providing reliability and efficiency for both residential and commercial applications.

The SkyLink 91562-01 stands out for its versatility and ease of use. This wireless communication hub can connect with multiple sensors and devices, enabling a comprehensive security system. Featuring advanced encryption technology, it ensures that communications between the hub and connected devices remain secure from unauthorized access. The 91562-01 supports DIY installation, which means users can easily set up their system without needing professional assistance. Additionally, its sleek design allows it to blend seamlessly into any home decor.

Next, the SkyLink 91558-01A is engineered to provide enhanced connectivity and communication. It features long-range capabilities, allowing it to cover expansive areas without losing signal strength. This model is compatible with a variety of SkyLink sensors and accessories, enabling users to customize their security system according to their specific needs. The 91558-01A is equipped with a built-in backup battery, ensuring that the system remains operational even during power outages, a crucial feature for maintaining security integrity.

Finally, the SkyLink 91561-01 is particularly suited for users who prioritize ease of access and monitoring. With its user-friendly interface, it allows users to manage their security settings and receive real-time alerts from anywhere using a mobile app. This model supports remote access, adding a layer of convenience for those on the go. Moreover, the 91561-01 integrates with smart home devices, providing a holistic approach to home automation and security.

In summary, the SkyLink 91562-01, 91558-01A, and 91561-01 represent a convergence of technology, security, and user-friendliness. With features like long-range communication, innovative encryption, and mobile connectivity, these devices are designed to cater to the dynamic needs of users, ensuring safety and peace of mind in an increasingly connected world. Each model brings its set of strengths to the table, making them suitable for a wide range of applications and user preferences. SkyLink continues to push the envelope in wireless communication and security technology, solidifying its position as a leader in the industry.
Top Page Image Contents