SkyLink 91558-01A Later Softails, Except Deuce Fxstd, Later Softail Deuce Fxstd, Sportster Models

Page 4

2000 and Later Softails, Except Deuce (FXSTD)

1.Remove the fuel tank mounting bolts. See the correct section (Carbureted or EFI Engine) of the service manual.

2.Remove the rear splash guard (inner fender) per service manual instructions.

3.See Figure 4. Use cable straps from the kit to fasten the transmitter (3) to the wire harness located between the frame, rear fork (2), and rear tire (1).

4.See Figure 5. Route the transmitter wires (2) up to the battery compartment (4) and along the right side of the frame.

Proceed to the Harness Connection section.

is06711

2

 

1

3

 

1.Rear wheel and tire

2.Rear fork

3.Transmitter

Figure 4. Transmitter Mounting, 2000 and Later Softails,

Except Deuce (FLSTC Shown)

 

2

is06712

1

3

 

4

1.Ground connection

2.Transmitter wires to headlamp

3.Orange/white wire

4.Battery compartment (reference)

Figure 5. Power and Ground Connections, 2000 and Later

Softails (FLSTC Shown)

2000 and Later Softail Deuce (FXSTD)

1.Remove the fuel tank mounting bolts. See the correct section (Carbureted or EFI Engine) of the service manual.

2.Remove the liner from the adhesive backing of the tape pad on the transmitter.

3.See Figure 6. Mount the transmitter to the surface below the ECM/ignition module. Route the transmitter wires for- ward along the right side of the frame.

Proceed to the Harness Connection section.

is06713

1

2

 

3

4

1.Ground connection

2.Orange/white wire

3.Transmitter

4.ECM/ignition module

Figure 6. Transmitter Mounting, 2000 and Later Deuce

1994-2003 Sportster Models

1.Remove the fuel tank. See the correct section (Carbureted or EFI Engine) of the service manual.

2.See Figure 7. Position the transmitter (1) to the main wire harness in the area under the seat, as far as possible from the oil tank, and fasten the transmitter to the harness using cable straps from the kit.

Proceed to the Harness Connection section.

-J02028

4 of 16

Page 3 Page 5
Image 4
Page 3 Page 5
Contents General FCC NoticesReceiver Installation Vehicle PreparationTransmitter Installation For Dyna, Softail and Sportster modelsDyna Models Earlier SoftailsLater Softails, Except Deuce Fxstd Later Softail Deuce FxstdSportster Models Rear wheel and tire Rear fork TransmitterFlhr Touring Models Later Sportster ModelsFLHT, Flhx and Fltr Touring ModelsTrike Models Transmitter Fuse block wire harness Rod ModelsLater V-Rod Models Louvered cover Tab ScrewHarness Connection GeneralLater Softail Models Touring and Trike ModelsEarlier Softail Models Black Lead Connection to GroundInto 1 splice ORANGE/WHITE Lead Connection to Switched Power Source Ground screws black wireEarlier Dyna Models Later Dyna ModelsFuse Block Adapter Wire Dyna and Softail Softail ModelsPower Connections Sportster Models Wire Splice Locations 2002-2003 V-RodWire Splice Locations 2005 and Later V-Rod Yellow Andwhite Lead Connections to HeadlampIs06727 Troubleshooting Reset the ReceiverNO. Proceed to Reset the Receiver Receiver and Transmitter ProgrammingService Parts Not sold separately

91562-01, 91558-01A, 91561-01 specifications

SkyLink has made a remarkable entry into the realm of wireless communication devices with its innovative models: the SkyLink 91562-01, 91558-01A, and 91561-01. Each of these devices is tailored to meet the demands of modern security systems, providing reliability and efficiency for both residential and commercial applications.

The SkyLink 91562-01 stands out for its versatility and ease of use. This wireless communication hub can connect with multiple sensors and devices, enabling a comprehensive security system. Featuring advanced encryption technology, it ensures that communications between the hub and connected devices remain secure from unauthorized access. The 91562-01 supports DIY installation, which means users can easily set up their system without needing professional assistance. Additionally, its sleek design allows it to blend seamlessly into any home decor.

Next, the SkyLink 91558-01A is engineered to provide enhanced connectivity and communication. It features long-range capabilities, allowing it to cover expansive areas without losing signal strength. This model is compatible with a variety of SkyLink sensors and accessories, enabling users to customize their security system according to their specific needs. The 91558-01A is equipped with a built-in backup battery, ensuring that the system remains operational even during power outages, a crucial feature for maintaining security integrity.

Finally, the SkyLink 91561-01 is particularly suited for users who prioritize ease of access and monitoring. With its user-friendly interface, it allows users to manage their security settings and receive real-time alerts from anywhere using a mobile app. This model supports remote access, adding a layer of convenience for those on the go. Moreover, the 91561-01 integrates with smart home devices, providing a holistic approach to home automation and security.

In summary, the SkyLink 91562-01, 91558-01A, and 91561-01 represent a convergence of technology, security, and user-friendliness. With features like long-range communication, innovative encryption, and mobile connectivity, these devices are designed to cater to the dynamic needs of users, ensuring safety and peace of mind in an increasingly connected world. Each model brings its set of strengths to the table, making them suitable for a wide range of applications and user preferences. SkyLink continues to push the envelope in wireless communication and security technology, solidifying its position as a leader in the industry.
Top Page Image Contents