SkyLink 91561-01 Transmitter Installation, For Dyna, Softail and Sportster models, Dyna Models

Page 3

For Dyna, Softail and Sportster models:

is06667

When servicing the fuel system, do not smoke or allow open flame or sparks in the vicinity. Gasoline is extremely flammable and highly explosive, which could result in death or serious injury. (00330a)

3.The fuel tank must be removed or slightly raised to access wiring underneath. See the correct section (Carbureted or EFI Engine) of the service manual for fuel tank bolt removal instructions.

If the fuel tank must be removed, follow the instructions in the service manual to remove the instrument console (if equipped) from the fuel tank before removing the tank.

TRANSMITTER INSTALLATION

Kits 91558-01A and 91561-01 only

NOTE

Transmitter effective range may vary between motorcycle models. For best garage door opener range, position the transmitter on the motorcycle as far as possible from large metal surfaces.

For best garage door opener performance, keep the trans- mitter and wires as far from vehicle heat sources as possible

Do not cover the view of the circuitry on the transmitter when fastening the foam tape retainer pad to the transmitter or mounting the transmitter to the vehicle. A red LED on the cir- cuitry side must remain visible for programming the receiver- transmitter. For best adhesion, use isopropyl alcohol to clean the surfaces to which the tape pad will mount.

1.See Figure 27. Remove the liner from the adhesive backing on one side of the tape pad (3). Carefully position the pad to the plastic casing of the transmitter (1), and press firmly into place.

2.Find specific model instructions in the sections that follow.

Dyna Models

1.Remove the fuel tank mounting bolts. See the correct section (Carbureted or EFI Engine) of the service manual.

2.See Figure 2. Use cable straps to fasten the transmitter to the Dyna wire harness (3), located under the seat and near the battery compartment. Route the transmitter wires forward along the right side of the frame.

Proceed to the Harness Connection section.

2

3

1

1.Orange/white wire

2.Ground connection

3.Strap transmitter to wire harness

Figure 2. Transmitter Mounting (Dyna)

1999 and Earlier Softails

1.Remove the fuel tank mounting bolts. See the correct section (Carbureted or EFI Engine) of the service manual.

2.See Figure 3. Remove the ground screw (1), located on the top of the frame, under the seat near the fuel tank.

3.See Figure 27. Use cable straps (8) from the kit to fasten only the transmitter case and the short section of conduit to the motorcycle wires leading forward toward the headlamp.

Proceed to the Harness Connection section.

is06668

1

3

2

1.Ground connection

2.Garage opener transmitter

3.Orange/white wire

Figure 3. Transmitter Mounting (1999 and Earlier Softails)

-J02028

3 of 16

Page 2 Page 4
Image 3
Page 2 Page 4
Contents FCC Notices GeneralVehicle Preparation Receiver InstallationEarlier Softails Transmitter InstallationFor Dyna, Softail and Sportster models Dyna ModelsRear wheel and tire Rear fork Transmitter Later Softails, Except Deuce FxstdLater Softail Deuce Fxstd Sportster ModelsLater Sportster Models Flhr Touring ModelsFLHT, Flhx and Fltr Touring ModelsTrike Models Louvered cover Tab Screw Transmitter Fuse block wire harnessRod Models Later V-Rod ModelsTouring and Trike Models Harness ConnectionGeneral Later Softail ModelsBlack Lead Connection to Ground Earlier Softail ModelsInto 1 splice Later Dyna Models ORANGE/WHITE Lead Connection to Switched Power SourceGround screws black wire Earlier Dyna ModelsSoftail Models Fuse Block Adapter Wire Dyna and SoftailWire Splice Locations 2002-2003 V-Rod Power Connections Sportster ModelsYellow Andwhite Lead Connections to Headlamp Wire Splice Locations 2005 and Later V-RodIs06727 Receiver and Transmitter Programming TroubleshootingReset the Receiver NO. Proceed to Reset the ReceiverService Parts Not sold separately

91562-01, 91558-01A, 91561-01 specifications

SkyLink has made a remarkable entry into the realm of wireless communication devices with its innovative models: the SkyLink 91562-01, 91558-01A, and 91561-01. Each of these devices is tailored to meet the demands of modern security systems, providing reliability and efficiency for both residential and commercial applications.

The SkyLink 91562-01 stands out for its versatility and ease of use. This wireless communication hub can connect with multiple sensors and devices, enabling a comprehensive security system. Featuring advanced encryption technology, it ensures that communications between the hub and connected devices remain secure from unauthorized access. The 91562-01 supports DIY installation, which means users can easily set up their system without needing professional assistance. Additionally, its sleek design allows it to blend seamlessly into any home decor.

Next, the SkyLink 91558-01A is engineered to provide enhanced connectivity and communication. It features long-range capabilities, allowing it to cover expansive areas without losing signal strength. This model is compatible with a variety of SkyLink sensors and accessories, enabling users to customize their security system according to their specific needs. The 91558-01A is equipped with a built-in backup battery, ensuring that the system remains operational even during power outages, a crucial feature for maintaining security integrity.

Finally, the SkyLink 91561-01 is particularly suited for users who prioritize ease of access and monitoring. With its user-friendly interface, it allows users to manage their security settings and receive real-time alerts from anywhere using a mobile app. This model supports remote access, adding a layer of convenience for those on the go. Moreover, the 91561-01 integrates with smart home devices, providing a holistic approach to home automation and security.

In summary, the SkyLink 91562-01, 91558-01A, and 91561-01 represent a convergence of technology, security, and user-friendliness. With features like long-range communication, innovative encryption, and mobile connectivity, these devices are designed to cater to the dynamic needs of users, ensuring safety and peace of mind in an increasingly connected world. Each model brings its set of strengths to the table, making them suitable for a wide range of applications and user preferences. SkyLink continues to push the envelope in wireless communication and security technology, solidifying its position as a leader in the industry.
Top Page Image Contents