Planning Your Home Security Needs, Installation

PLANNING YOUR HOME SECURITY NEEDS

Before you begin to install your security system, analyze the premises to deter- mine your security needs. Consider those doors and windows which are more likely to be used as points of entry by an intruder, the ones that are poorly lit or the entrances that can not be seen from the street.

Sketch a map of the premises and determine which doors and/or windows need contact sensors and which areas of the premises need to be monitored by a motion sensor. We recommend that you put one door/window sensor on the door you enter/exit from most often, the other sensor on your secondary entrance and your motion sensor monitoring the bedrooms, (stairway or hallway leading to the bedrooms).

If you have determined that you need additional sensors, see Additional Accessories on page 27.

Below is an example of how to position your security system in a house.

BEDROOM	BACK DOOR
BEDROOM	DOOR/WINDOW
	SENSOR

BEDROOM

MOTION SENSOR

KITCHEN

BATHROOM

LIVING ROOM

DINING ROOM

	MASTER	CONTROL PANEL
	BEDROOM	CONTROL PANEL
	BEDROOM

DOOR/WINDOW

FRONT SENSOR

DOOR

You may choose to install a motion sensor to protect any valuables such as antiques or paintings. Point the motion sensor directly at the valuables and if they are disturbed in any way the alarm will be sounded.

INSTALLATION

The Control Panel, door/window sensors and the motion sensor are installed using the screws included. We have also included double sided tape, (for the door/window sensor and the motion sensor) to use for temporary installation while you are positioning the sensors. Once all the sensors are positioned correctly, install them permanently with the screws. We have also included wall anchors and templates to help position the screws correctly.

How to use the templates:

1.Cut the template required.

2.Tape it in position.

3.Screw part way into the surface where the holes are marked.

4.Unscrew the screws and remove the template.

5.Screw the component in place where you started the screws.

INSTALLING THE CONTROL PANEL (SC-001)

Position the Control Panel near the door you use to enter/exit from most often and within access of an electrical outlet. The Control Panel runs on regular elec- trical current. It also contains a 9 volt backup alkaline battery in case power is interrupted for any reason.

There are 3 ways to attach the Control Panel on the wall:

1.Use double sided tape for temporary use.

2.Hanging it from the two keyholes on the two stationary screws.

3.Screwing the back onto the wall with 4 screws.

To mount the Control Panel:

1. Open the case.

a) Press the two tabs on top of the

Control Panel

b)Pull open the front

2.Thread the AC adapter cord through the large hole in the back of the unit and plug it into the circuit board as shown. The Adapter cord must be inserted through the back of the unit before it is attached to the wall.

3.Insert the 9 volt alkaline battery and rotate the antenna from the inside of

the Control Panel to the outside.

–5–

–6–

SC-100 specifications

The SkyLink SC-100 is an advanced drone designed for a variety of aerial applications, catering to both professionals and enthusiasts. This versatile drone integrates cutting-edge technology, making it stand out in a competitive market.

One of the key features of the SkyLink SC-100 is its high-resolution camera, capable of capturing stunning 4K videos and high-quality images. The camera is equipped with a gimbal stabilization system that eliminates vibrations, ensuring smooth footage even in challenging conditions. This is particularly beneficial for photography, videography, and surveillance tasks, allowing users to capture detailed imagery from a bird's-eye view.

The drone boasts an impressive flight time of up to 30 minutes on a single charge, thanks to its efficient battery design. This extended duration allows users to conduct longer missions without the need for frequent recharges. The SC-100 also features an intelligent battery management system that monitors the battery's health and performance, providing users with data to ensure optimal operation.

Speed and agility are hallmarks of the SkyLink SC-100, which can reach speeds of up to 50 km/h. Its powerful motors and aerodynamic design enable it to perform complex maneuvers with ease, making it suitable for dynamic applications such as racing or search and rescue missions. Additionally, the drone is equipped with a range of smart flight modes, including follow-me, waypoint navigation, and orbit mode, enhancing its adaptability for various scenarios.

Another noteworthy feature is its robust obstacle avoidance system. The SC-100 incorporates multiple sensors, including ultrasonic and visual sensors, allowing it to perceive its surroundings and navigate safely without collisions. This technology is particularly useful for beginners and professionals alike, providing an added layer of safety during flight.

Furthermore, the SkyLink SC-100 supports a user-friendly mobile app that enables real-time control and monitoring. The app provides access to advanced features such as live streaming of footage, customizable flight paths, and detailed telemetry data. Users can easily share their captured content through integrated social media options, enhancing engagement with their audience.

In summary, the SkyLink SC-100 stands out with its high-quality camera, impressive flight time, speed, obstacle avoidance technology, and user-friendly controls. These features make it an exceptional choice for drone enthusiasts and industry professionals looking to leverage aerial technology for various applications. Whether for recreational use, aerial photography, or commercial projects, the SC-100 promises reliability and performance.