SkyLink SC-100 manual Keychain Transmitter 4B-434, To ARM System Using the Keychain Transmitter

Page 9
–13–

STANDARD PROGRAMMING

You hear a long beep. The arm light and the red lights in zones 3 and 4 go on. Both the green and red lights flash in zone 1 for 45 seconds which gives you 45 seconds to leave the premises before the system is activated. After 45 seconds, both the green and red lights in zone 1 remain on. Upon re-entering the premises through zone 1, you have 30 seconds till the alarm sounds. The system gives you 30 seconds from the time you activate the door/window sensor, for example opening the front door, to get to the Control Panel to deactivate the system. Zone 2 remains off which allows the person in the premises to move around without activating the motion sensor. Zones 3 and 4 remain instant. If any sensor in zone 3 or 4 are activated, the alarm sounds instantly.

Option 3: Night Sequence - To arm your system when there are people in the premises and no one is expected to enter or exit. Example at night when every-

one is sleeping.

1.Press the current MPIN [ 0 0 0 ].

2.Press [ A ].

3.Press [ B ].

You hear a long beep. The arm light, the red light in zones 1, 3 & 4 go on. If any of the sensors are activated in any of these 3 zones, the alarm is sounded instantly. Zone 2, the motion sensor, remains off allowing movement throughout the premises.

TO DISARM THE SYSTEM USING THE KEYPAD ON THE CONTROL PANEL

1.Press the current MPIN [ 0 0 0 ].

2.Press [ # ].

All the lights but the AC PWR light go off. The system is now disarmed.

Note: If [MPIN,#] is entered when the system in not activated, the system will default back to the last sequence before the unit was turned off.

Emergency Silent Alarm works in conjunction with the Emergency Dialer AD-433S (option), see Additional Accessories.

If under duress when disarming the system:

1.Enter the current MPIN [ 0 0 0 ].

2.Press [ B ] [ B ].

This will terminate the delay mode (stop the steady repeated beep) and return to the previous arm mode. It will also send a signal to the Emergency Dialer silently which will then automatically send a prerecorded message for help.

Note: Do not use Emergency Silent Alarm [PIN], [B], [B] if your Skylink security system includes the Audio alarm AA-433, since the Silent alarm is not designed to work with AA-433, which means [PIN], [B], [B] will sound the siren of the AA-433 instantly.

KEYCHAIN TRANSMITTER (4B-434)

The Keychain Transmitter conveniently fits on any keychain. It allows you to arm and disarm the system from a distance of approximately 100 feet from the Control Panel. The distance will depend on what is between the keychain transmitter and the Control Panel. It also has a panic button that lets you remotely activate the siren instantly.

Note: Make sure you press down on the transmitter for one full second or the system may not respond.

3

2

1

PANIC

TO ARM SYSTEM USING THE KEYCHAIN TRANSMITTER

There are 2 different arm options to choose from:

1.Press button #1, and the Control Panel will beep once.

The system will be armed in the Away Sequence. To be used to arm the system when you are the last person leaving the premises. (see page 12 for informa- tion on the Away Sequence).

Pressing button #1 will give you the same result as pressing: MPIN, [ B ] , [ C ] on the keypad.

2.Press button #2, and the Control Panel will beep once.

The system will be armed in Home Sequence. To be used to arm the system when someone remains in the premises. (see page 12 for information on the Home Sequence).

Pressing button #2 will give you the same result as pressing: MPIN, [ C ] on the keypad.

–14–

Page 8 Page 10
Image 9
Page 8 Page 10
Contents Customer Service Fax / Télécopieur 800Email / Courrier électronique support@skylinkhome.com Total Protection Alarm System Table of Contents Total Protection Alarm SystemOverview Package ContentsHow to use the templates InstallationInstalling the Control Panel SC-001 Planning Your Home Security NeedsInstalling the Motion Sensor PS-434A Installing the DOOR/WINDOW Sensor WT-433Transmitter Magnetic Switch Sensor SensitivityTo set control panel to Chime Mode Testing Your SystemWalk Test To test the Door/Window SensorStandard Programming Lights and SoundsTo Disarm the System Using the Keypad on the Control Panel To ARM System Using the Keychain TransmitterKeychain Transmitter 4B-434 Passwords Panic Button on the Keychain TransmitterMaster Personal Identification Number Mpin Secondary Personal Identification Number Spin Advanced ProgrammingAdding a Spin Deleting a SpinTo Program a Sensor to a Zone To Clear a ZoneTo Delete a Keychain Transmitter from Zone Enter the current Mpin Press BStandard Arming Sequences Additional Arming SequencesTo Customize a Sequence Control Panel Battery Battery MaintenanceTo replace the Control Panel backup battery Summary of Arming SequencesMotion Sensor Battery DOOR/WINDOW Sensor BatteryKeychain Transmitter Battery Additional Accessories Temperature Sensor TS-433 Alarm Sensor SS-433Audio Sensor AS-433 Keychain Transmitter 4B-433ASystème de Sécurité Sans fil Table DES Matières VUE Densemble Contenu DE LemballagePour monter le panneau de commande Installation DU Panneau DE Commande SC-001Planification SUR VOS Besoins DE Sécurité a Domicile Comment utiliser les gabaritsInstallation DU Détecteur DE Mouvements PS-434A Installation DE Capteurs PORTE/FENÊTRE WT-433Sensibilité DU Détecteur Tester Votre Système Pour régler le panneau de commande au Mode CarillonTest DE Marche Pour tester les capteurs de porte/fenêtreLumières Lumières ET SonsLumières DE Zone SonsSéquences d’armement Programmation DE BaseLorsque le système est armé Transmetteur PORTE-CLEFS À Distance 4B-434Lorsque la sirène se fait entendre LE Bouton Panique SUR LE Transmetteur PORTE-CLEFSMots DE Passe Numéro D’IDENTIFICATION Personnel Principal NippNuméro D’IDENTIFICATION Personnel Secondaire Nips Programmer DES Capteurs À Différentes Zones Programmation AvancéeLibérer UNE Zone Programmer UN Capteur À UNE ZonePour Libérer LE Transmetteur PORTE-CLEFS DE LA Zone Séquences D’ARMEMENT DE BaseSéquences Darmement Additionnelles Personnaliser UNE Séquence Pour remplacer la pile de secours du panneau de commande Pile DU Panneau DE CommandeSommaire DES Séquences D’ARMEMENT Entretien DE LA PilePile DU Détecteur DE Mouvements Pile DU Capteur DE PORTE/FENÊTREPile DU Transmetteur PORTE-CLEFS Accessoires Additionnels Détecteur de fumée SS-433 Détecteur de temperature TS-433Detecteur son AS-433 Transmetteur Porte-clefs 4B-433ASistema de Alarma con Protección Total Índice Descripción Contenido DEL ConjuntoInstalación Cómo Planear LA Seguridad DE SU Hogar / NegocioComo utilizar los modelos Para Instalar EL Panel DE Control SC-001Instalando EL Sensor PUERTA/FENESTRA WT-433 Instalando EL Sensor DE Movimiento PS-434ASensibilidad DEL Sensor Transmisor Interruptor magnetico ImánPrueba Walk Test Prueba DE SU SistemaPara fijar el Panel de Control al modo del Carillon Para probar el sensor puerta / fenestraEntry MODE. Acción Retardada Luces Y SonidosSecuencias para alejarse Programacion EstandardPor ejemplo durante la noche cuando todos estan durmiendo Presione el Mpin actuál 0 0 Presione a Presione BArmar EL Sistema Usando EL Transmisór Llavero Transmisór a Llavero 4B-434Incorpore el Mpin actuál 0 0 Presione B B Hay dos diversas opciones para armar que usted puede elegirPalabras DE Paso EL Botón DE Pánico EN EL Transmisór LlaveroNúmero Principal DE Identificación Personal Mpin Número Secundariode Identificacion Personal Spin Programación AvanzadaAdición de una Spin Suprimiendo una SpinPara Cancelar UN Transmisor Llavero DE LA Zona Para Borrar UNA ZonaPara Programar UN Sensor a UNA Zona Secuencias Adicionales DEL Armar Sequencias Estandárd Para ArmarSumario DE LAS Secuencias Para Armar Paramodificar UNA Secuenciapararequisitos ParticularesAbajo es un sumario de todas las secuencias preprogramadas Acumulador DEL Panel DE Control Mantenimiento DE LAS BateriasPara Remplazarlabateríadereservadelpanel DE Control Batería DEL Sensor DE MovimientoBatería DEL Sensor DE LA Puerta / Fenestra Accesorios AdicionalesPara substituir la batería Bateria DEL Transmisor LlaveroAlarma Silencioso SW-433 El Audio Alarmar AA-433Sensor de Vibración VS-433 Transmisor con el Botón de Panico, Agua Resistiente PT-434

SC-100 specifications

The SkyLink SC-100 is an advanced drone designed for a variety of aerial applications, catering to both professionals and enthusiasts. This versatile drone integrates cutting-edge technology, making it stand out in a competitive market.

One of the key features of the SkyLink SC-100 is its high-resolution camera, capable of capturing stunning 4K videos and high-quality images. The camera is equipped with a gimbal stabilization system that eliminates vibrations, ensuring smooth footage even in challenging conditions. This is particularly beneficial for photography, videography, and surveillance tasks, allowing users to capture detailed imagery from a bird's-eye view.

The drone boasts an impressive flight time of up to 30 minutes on a single charge, thanks to its efficient battery design. This extended duration allows users to conduct longer missions without the need for frequent recharges. The SC-100 also features an intelligent battery management system that monitors the battery's health and performance, providing users with data to ensure optimal operation.

Speed and agility are hallmarks of the SkyLink SC-100, which can reach speeds of up to 50 km/h. Its powerful motors and aerodynamic design enable it to perform complex maneuvers with ease, making it suitable for dynamic applications such as racing or search and rescue missions. Additionally, the drone is equipped with a range of smart flight modes, including follow-me, waypoint navigation, and orbit mode, enhancing its adaptability for various scenarios.

Another noteworthy feature is its robust obstacle avoidance system. The SC-100 incorporates multiple sensors, including ultrasonic and visual sensors, allowing it to perceive its surroundings and navigate safely without collisions. This technology is particularly useful for beginners and professionals alike, providing an added layer of safety during flight.

Furthermore, the SkyLink SC-100 supports a user-friendly mobile app that enables real-time control and monitoring. The app provides access to advanced features such as live streaming of footage, customizable flight paths, and detailed telemetry data. Users can easily share their captured content through integrated social media options, enhancing engagement with their audience.

In summary, the SkyLink SC-100 stands out with its high-quality camera, impressive flight time, speed, obstacle avoidance technology, and user-friendly controls. These features make it an exceptional choice for drone enthusiasts and industry professionals looking to leverage aerial technology for various applications. Whether for recreational use, aerial photography, or commercial projects, the SC-100 promises reliability and performance.
Top Page Image Contents