SkyLink AD-433S manual Security Control Panel SC-001, Silent Alarm SW-433, Vibration Sensor VS-433

Page 14

ADDITIONAL ACCESSORIES

Security Control Panel (SC-001)

-Four alarm modes (Day, Night, Away, Chime)

-Four zones, each zone controls up to 6 decives

-Reliable design with microcontroller

-110dB siren

Silent Alarm (SW-433)

-Plug into any AC outlet, then plug light into Silent Alarm unit

-Light flashes when sensor(s)/transmitter(s) is (are) activated

-Silently alerts occupants including the hearing impaired

Vibration Sensor (VS-433)

-Activates Security Control Panel or Emergency Dialer when vibration is detected

-Attach vibration sensor to valuables, (stereo system, antiques)

-9V alkaline battery included

Water Resistant Panic Button Transmitter (PT-434)

-Activates Security Control Panel and Emergency Dialer by pressing the panic button when under duress

-Ideal for Seniors, Handicapped and Disabled

-Water resistant, carry transmitter all the time

-Operates using lithium batteries (included)

Keypad Control (KP-433)

-Functions as an external keypad or secondary control location

-Use the keypad to arm/disarm the Audio Alarm (AA-433)

-Eliminates the need to walk through your premises to your Security Systems Control Panel

-Operates using lithium batteries (included)

–25–

ADDITIONAL ACCESSORIES

Smoke Sensor (SS-433)

-Detects sound frequencies of existing smoke, carbon monoxide alarms

-Activates Security Control Panel (SC-001) or Emergency Dialer (AD-433S) when the preset sound frequency is detected

-9V alkaline battery included

Audio Sensor (AS-433)

-Detects alarm sound from existing security system alarm; sends signal to Dial-Alert.

-Eliminates need for monitoring service.

-9V alkaline battery included

Keychain Transmitter (4B-433A)

-Activates and deactivate the Audio Alarm (AA-433) at the push of a button

-Reliable design with microcontroller

-12V alkaline battery included

Garage Door Sensor (GS-433)

-Place sensor on garage door

-Activates Security Control Panel (SC-001) when the garage door is opened

-12V alkaline battery included

Temperature Sensor (TS-433)

-Monitors temperature of a specific area (i.e., greenhouse, horse farms, laboratory etc.)

-Activates Security Control Panel (SC-001) or Emergency Dialer (AD-433S) when the tempera- ture of the monitored area is above or below a preset temperature

-Temperature range: 0°F (-19°C) to 159°F (69°C)

-Operates using lithium batteries (included)

Flood Sensor (FS-433)

-Place sensor along basement wall, near water heater, washing machine etc.

-Notifies Security Control Panel (SC-001) or Emergency Dialer (AD-433S) when water is detected

-12V alkaline battery included

–26–

Page 13 Page 14
Image 14
Page 13 Page 14
Contents Emergency Dialer Emergency Dialer Table of Contents Package ContentsInstalling the DIAL-ALERT AD-433S InstallationHow to use the template OverviewSwitch Setting Tone/Pulse SwitchLights and Sounds Standard ProgrammingPlayback PRE-RECORDED Message Storing Telephone NumbersDelete a Telephone Number from Memory Activate the DIAL-ALERT with the Panic Button on the KeypadProgramming a Pause Period Advanced ProgrammingProgram the Calling Time SET the Type of Phone SystemDelete Programmed TRANSMITTERS/SENSORS/SECURITY Systems Delay Dialing Entry / Exit ModeProgram the ID Code of a Transmitter To ARM/DISARM the DialerDial Sequence Setting Entering a premises using the delay dialingTo set the dialing delay To program the Dial Sequence SettingConnect the DIAL-ALERT with Your Existing Alarm System Dial-Alert Battery Battery MaintenanceAdditional Accessories To replace the dialer backup batterySecurity Control Panel SC-001 Silent Alarm SW-433Temperature Sensor TS-433 Vibration Sensor VS-433
Top Page Image Contents