SkyLink AD-433S, Emergency Dialer Dial-Alert manual

Page 2

Emergency Dialer

DIAL-ALERT TM

AD-433S

USER'S INSTRUCTIONS

SKYLINK TECHNOLOGIES INC.

Your Guide to the

Emergency Dialer

DIAL-ALERT TM

9 VOLT

The AD-433S Emergency Dialer contains all the above items.

–2–

Image 2

Contents Emergency Dialer Emergency Dialer Table of Contents Package ContentsInstalling the DIAL-ALERT AD-433S InstallationHow to use the template OverviewSwitch Setting Tone/Pulse SwitchLights and Sounds Standard ProgrammingPlayback PRE-RECORDED Message Storing Telephone NumbersDelete a Telephone Number from Memory Activate the DIAL-ALERT with the Panic Button on the KeypadProgramming a Pause Period Advanced ProgrammingProgram the Calling Time SET the Type of Phone SystemDelete Programmed TRANSMITTERS/SENSORS/SECURITY Systems Delay Dialing Entry / Exit ModeProgram the ID Code of a Transmitter To ARM/DISARM the DialerDial Sequence Setting Entering a premises using the delay dialingTo set the dialing delay To program the Dial Sequence SettingConnect the DIAL-ALERT with Your Existing Alarm System Dial-Alert Battery Battery MaintenanceAdditional Accessories To replace the dialer backup batterySecurity Control Panel SC-001 Silent Alarm SW-433Temperature Sensor TS-433 Vibration Sensor VS-433