PYLE Audio PLCD20CH manual How To Use The Magazine, Loading a disc, Installing the magazine

Page 3
HOW TO USE THE MAGAZINE

HOW TO USE THE MAGAZINE

 Loading a disc Installing the magazine Loading a disc

1.Pick the tab on the magazine’s disc tray and pull out only of the trays.

2.Place the disc on the tray with its play surface facing down (label surface facing up).

Each tray can accommodate only one disc.

3.Press the tab on the disc tray to store the tray back in the magazine.

Up to ten discs can be loaded.

Label side up

Play side down

Notes:Manual background Installing the magazine

1.Slide the door toward the right.

2.First check that the magazine with the discs has its top side facing up and it is pointed in the right-direction for installation. Push it in until clicks into place, indicating that it is now locked.

When the magazine is used for the first time, it will not lock into place unless the power supply has been connected.

Ejecting the magazine

The magazine is ejected by pressing the eject button ( Manual background ).

Notes:

Be absolutely sure to close the door after having inserted or ejected the magazine. Dust or dirt finding its way inside may cause malfunctioning of the unit.

Eject button Manual background

3

Image 3
Contents Disc Magazine OPERATING INSTRUCTIONSCompact Disc Auto Changer PLCD20CHHINTS FOR CORRECT AND SAFE OPERATION CONTENTSHOW TO USE THE MAGAZINE Installing the magazineLoading a disc With new discs PRECAUTIONS FOR HANDLING DISCSSome functions do not operate Reset button INSTALLATION PARTSWIRING RESET FUNCTIONBEFORE INSTALLING THE UNIT Installation and Wiring PrecautionsTransport Lock Screws For use when unit is installed vertically For use when unit is installed at a 45 anglePosition of the built-in anti-vibrationboard INSTALLATION Pull back the carpet and determine Set the built-in anti-vibrationboards Procedure for Installation Suspended Position Cause TROUBLESHOOTINGSymptom HANDLING THE DISCSSELECT SCAN REPEAT RANDOM CD Changer Remote Control SystemRESETDISC OPERATING INSTRUCTIONSSelect Button PARTS AND THEIR FUNCTIONSControl section Liquid Crystal Display LCDDisc Selection Button + Power Button Power On/OffRandom Play Button Track or DISC Random Play/Pause Button Play/PauseReset button Reset ButtonPower ON and Play BEFORE USING THE SYSTEMSETTING UP FOR OPERATION Wiring - Using FM ModulatorPlaying a CD CD CHANGER OPERATIONListening to the CD Play Playing in Other ModesRandom play Installation of the FM Modulator/Ground IsolatorProcedure To Mount The CD Changer Commander unit Listening to the radio or tapeInterference on 89.1 MHz Wiring - FM Modulator unit3.GROUND - /BACK UP Control and Function Keys1.+12V TO IGNITION 2.ANTENNA6.CD CHANGER 5.RESET FOR MODULATOR FUNCTION ONLY7.CD CHANGER COMMANDER 4.OUTPUT FREQUENCYCause Error Messages showing on display of controllerTROUBLESHOOTING Symptom88-D0040-14