CD CHANGER OPERATION
Listening to the CD Play
•Playing a CD
Press the play/pause button ( 
).
Adjust the volume and tone using the FM car stereo to which the system is connected.
*When using the system for the first time or when the CD magazine has just been replaced, play starts from the first track on the first disc.
•To temporarily stop CD play
Press the play/pause button ( 
) during play. Disc number flashes on the display and play is temporarily stopped.
Press the button again to resume play starting from where was stopped.
*When the pause mode is maintained for 5 minutes or more, the power will be automatically turned off.
•Selecting the disc to be played
Display the number of the disc to be heard using the disc selector button ( + / – ). To advance to the next disc, press + .
To advance to the previous disc, press
•Selecting a track
Display the number of the track to be heard using the track skip button ( 
).
To advance to the next track, press 
.
To return the previous track, press 
.
*Pressing 
once returns play to the start of the track now being played.
Playing in Other Modes
•Scan play
-When the scan button (SCAN) is pressed, “SCAN ONE” appears, and the intro of each track on the disc now heard is played for 10 seconds each, and this operation is repeated.
-Press this button for a second, “SCAN ALL” will be shown on the display. When “SCAN ALL” function is activated, the first 10 seconds of each disc will be played in sequence.
-Press the scan button again while the intro of a track or disc you want to hear in its entirety is being played. Normal play is resumed starting from the track during which the scan play function was released.
•Repeat play
-When the repeat button (REPEAT) is pressed, “REPEAT ONE” appears, and the track now heard is played repeatedly.
-Press the repeat button again to release the repeat play function.
-Pressed long, “REPEAT ALL” will be shown on display. When “REPEAT ALL” is active, the entire disc is repeated.
18