Rinnai RHFE-308 FTR user manual Setting the Clock

SETTING THE CLOCK

When the appliance is first plugged in and then turned on, the Digital Display will show . As an example, let’s set the clock to 10:35 am.

TIMER/CLOCK SET INDICATOR

DIGITAL DISPLAY ON-OFF SWITCH INDICATOR

TIMER/TEMP ADJUSTMENT	ON-OFF SWITCH
	TIMER/CLOCK SET

OPEN THE CONTROL PANEL - SEE PAGE 10.

1

When the appliance is first plugged in or after a

power failure, the Digital Display will show .

Press the Set Times button once, the Clock Indicator will flash.

AM	Clock
	Timer 1
PM
	on off
Set ・ Room	Timer 2
Temp	Set times
・
Time

2

				AM		Clock
						Timer 1
				PM					off
								on
Press and hold the “			” button; the minutes will		Set ・ Room	Timer 2
begin to change first, then the time will change by					Temp
					・		Set times
whole hours. Release the button when AM 10:00					Time
shows on the Digital Display. Confirm that you have
selected AM, a small indicator on the left hand side of
the Digital Display indicates the AM setting.				AM		Clock
						Timer 1
				PM					off
								on
Press and hold the “		” button again, release the			Set ・ Room	Timer 2
					Temp
button when AM 10:35 shows. If you go past AM
					・		Set times
10:35, then the “	” button can be used to change				Time
the time settings in reverse.

3

Press the Timer Set button five times to lock in and complete setting the time. The Clock and Timer indicators will go out. A small indicator on the Digital Display will flash to show that the clock is operating.

AM	Clock
	Timer 1
PM
	on off
Set ・ Room	Timer 2
Temp	Set times
・
Time

– 14 –