Rinnai RHFE-308 FTR user manual Flue Manifold Position, Wall Mounting Brackets

Page 26

LOCATION

Do not install the heater in an unusually dusty area.

FLUE MANIFOLD POSITION

Important

The centre of the hole for the flue manifold must only be drilled in the position indicated on the diagram below.

•Use a flue guard if the terminal is easily accessible to children.

•Check local regulations.

•Guards are available as an optional extra.

Guard

•Floor must be level.

•Do not use electrical extension cords to connect the unit to a power supply.

•Keep the power cord away from the flue.

Drill Hole 80mmφ thru wall

115

Flue Elbow

677

265

217

All measurements are taken from the extremities of the appliance.

Before drilling the flue hole, check for water and gas pipes as well as electric cables.

For weatherboard walls drill through centre of the weatherboard from the outside, then drill from inside through the plaster board.

WALL MOUNTING BRACKETS

•Place top back spacer.

•Mark the position of the top edge of the top spacer on the wall.

•Move the heater away from the wall.

•Mark the centre lines 30mm down from the top edge mark, and 40mm in from the left and right hand sides of the top spacer.

•Attach wall brackets at the marked positon. Remove right hand back spacer.

– 26 –

Page 25 Page 27
Image 26
Page 25 Page 27
Contents RHFE-308 FTR Contents Getting to Know Your NEW RHFE-308FTR LouvreRemote Control OFFControl Panel Layout On / OFFFeatures Economy Mode Filter IndicatorRemote Control Auto ComfortSafety Points Clean with vacuum cleaner, weekly Turning on Operating Your NEW RHFE-308FTRTo Open the Control Panel Turning OFFRoom Temperature Adjustment Child Lock Economy Timer 1 Timer 2 Override FAN Filter Vertical Louvre AdjustmentDo not remove filter when appliance is operating Humidifier TraySetting the Clock Programming the ON/OFF Timers Turn to Next page to Operate the TimersOperating the Timers SET and Forget OperationTime Elapsed from Ignition to Preset Temperature PRE-HEATOverride Function Using the Remote ControlTo Change Temperature To Turn on or OFFCaring for Your NEW RHFE-308FTR Do not USE SolventsPRE-SERVICE Check At IgnitionError Messages Code Displayed Fault RemedyInstallation Instructions Important Safety InstructionsSpecification Location This heater is not designed to be builtSnow Areas Standard Installation of Flue ManifoldFlue Sizes FIT Back Covers Sides onlyFlue Manifold Position Wall Mounting BracketsInstalling the Flue GeneralDimension Terminal Position Distance Positioning the Flue TerminalSleeve and Manifold Installation Method for Standard WallsCheck rubber seal is in place on terminal Exhaust Pipe & Locking Clamp Fitting UnitAIR Inlet Hose Forced Flue Heater Extension Kits Names and Numbers of PartsFlue Extension Kits Installing AN Extension KIT for the RHFE-308 FTRHOW to Install Air intake hose Hose joint To prevent water condensation Maximum extendable lengthMetres less 1m per bend to a max 3 bends Conversion Fig #2 Fig #3Connecting GAS and Electrical Services Electrical ConnectionFault Finding Procedure TestingTesting Unit GAS Pressure Setting Satisfactory Unsatisfactory Front View Instruct Customer on USE of Heater Fitting TOP Spacer and Wall ClipHeater is now secured to the wall Block Diagram Wiring Diagram RHFE-308FTRDimensions Flue Position Through Wall Specification RHFE-308 FTRPage Service Contact

RHFE-308 FTR specifications

The Rinnai RHFE-308 FTR is an advanced heating appliance designed to deliver efficient and comfortable warmth, especially in residential settings. It has become a popular choice for homeowners seeking reliable heating solutions that also emphasize energy efficiency and sustainability.

One of the standout features of the Rinnai RHFE-308 FTR is its innovative technology known as "Flue Gas Heat Recovery." This technology allows the heater to utilize the heat generated by combustion to enhance the overall efficiency of the unit. By capturing and repurposing flue gases, the RHFE-308 FTR can provide superior heating performance while minimizing energy waste, making it an environmentally friendly option.

The unit is equipped with a powerful burner system that generates impressive heat output while maintaining low emissions. This not only ensures effective heating but also complies with stringent environmental regulations, contributing to a cleaner atmosphere. Additionally, the Rinnai RHFE-308 FTR is designed to operate quietly, allowing homeowners to enjoy a warm and peaceful environment.

Ease of use is another appealing characteristic of the RHFE-308 FTR. It features a user-friendly control panel, which allows for precise temperature adjustments. Homeowners can set their desired comfort level with just a few simple clicks. This model also includes programmable timer options, enabling users to schedule heating times that align with their daily routines, further enhancing convenience and energy savings.

The compact and sleek design of the RHFE-308 FTR ensures that it can easily blend into various interior styles without looking out of place. It’s also lightweight, making installation straightforward for both professional technicians and savvy DIY enthusiasts. The unit’s construction emphasizes durability, featuring high-quality materials that ensure longevity and reliable performance over time.

Safety is a paramount consideration in the design of the Rinnai RHFE-308 FTR. It comes with multiple safety features, such as overheat protection and a child safety lock, providing peace of mind for families.

Overall, the Rinnai RHFE-308 FTR stands out as a versatile and efficient heating solution. With its advanced technology, user-friendly features, and emphasis on safety, it offers a comfortable and reliable heating experience for modern homes.
Top Page Image Contents