Rinnai RHFE-308 FTR user manual Installation Instructions, Important Safety Instructions

Page 22

INSTALLATION INSTRUCTIONS

Important Safety Instructions

1.Gas Safety (Installation & Use) Regulations 1998 are the ‘Rules in Force’.

In your own interest and that of safety, it is law that all gas appliances shall be installed by competent persons in accordance with the above regulations.

Failure to install appliances correctly could lead to prosecution. Other persons should NOT attempt to install this equipment.

2.Unpack the appliance and check it carefully. If it appears to have any operating defects DO NOT INSTALL, but contact the supplier.

3.This appliance is intended to be used to raise the temperature in a room or office etc. You should NOT use it for any other purpose without seeking advice from the supplier.

4.This appliance is safe if correctly installed and sited. Please comply CAREFULLY with the instructions.

5.This appliance is to be used for NATURAL GAS (G20) and PROPANE (G31) only. It must NOT be used with any other type of gas.

6.Installation MUST be carried out in accordance with the current issue of:

a)Building Regulations issued by the Dept. of the Environment and Building Standards (Scotland Consolidation) Regulations.

b)I.E.E. Wiring Regulations for electrical installations.

c)Gas Safety (Installation and Use) Regulations 1998.

d)BS5871 Part 1:2001

e)BS5440 Part 1:2000 and Part 2:2000

f)BS6891 Part 1:1998 (Natural Gas) and BS5482 Part 1:1994 (Propane).

g)Local Byelaws

h)Children & Young Persons Act 1933 revised 1952

i)Health and Safety at Work etc. Act, 1974

j)Such other specifications or legislation that may have superseded the above documents.

7.Should the heater be fitted in a room where there are young children; elderly; infirm or handicapped persons, it is strongly recommended that a guard is fixed around the heater.

Guards conforming to British Standard Specification 6778:1986 (Fireguards for Use with Portable Free Standing or Wall Mounted Heating Appliances) in respect of fixing, strength and painted finish are acceptable and overall dimensions should be such that there is a gap of at least 100mm (4 inches) between the guard and the heater. Standard guards that meet these requirements are available from the supplier.

Please be sure you are aware of the implications of these notes.

– 22 –

Page 21 Page 23
Image 22
Page 21 Page 23
Contents RHFE-308 FTR Contents Getting to Know Your NEW RHFE-308FTR LouvreRemote Control OFFControl Panel Layout On / OFFFeatures Economy Mode Filter IndicatorRemote Control Auto ComfortSafety Points Clean with vacuum cleaner, weekly Turning on Operating Your NEW RHFE-308FTRTo Open the Control Panel Turning OFFRoom Temperature Adjustment Child Lock Economy Timer 1 Timer 2 Override FAN Filter Vertical Louvre AdjustmentDo not remove filter when appliance is operating Humidifier TraySetting the Clock Programming the ON/OFF Timers Turn to Next page to Operate the TimersOperating the Timers SET and Forget OperationTime Elapsed from Ignition to Preset Temperature PRE-HEATOverride Function Using the Remote ControlTo Change Temperature To Turn on or OFFCaring for Your NEW RHFE-308FTR Do not USE SolventsPRE-SERVICE Check At IgnitionError Messages Code Displayed Fault RemedyInstallation Instructions Important Safety InstructionsSpecification Location This heater is not designed to be builtSnow Areas Standard Installation of Flue ManifoldFlue Sizes FIT Back Covers Sides onlyFlue Manifold Position Wall Mounting BracketsInstalling the Flue GeneralDimension Terminal Position Distance Positioning the Flue TerminalSleeve and Manifold Installation Method for Standard WallsCheck rubber seal is in place on terminal AIR Inlet Hose Fitting UnitExhaust Pipe & Locking Clamp Forced Flue Heater Extension Kits Names and Numbers of PartsHOW to Install Installing AN Extension KIT for the RHFE-308 FTRFlue Extension Kits Air intake hose Hose joint Metres less 1m per bend to a max 3 bends Maximum extendable lengthTo prevent water condensation Conversion Fig #2 Fig #3Connecting GAS and Electrical Services Electrical ConnectionTesting Unit TestingFault Finding Procedure GAS Pressure Setting Satisfactory Unsatisfactory Front View Heater is now secured to the wall Fitting TOP Spacer and Wall ClipInstruct Customer on USE of Heater Block Diagram Wiring Diagram RHFE-308FTRDimensions Flue Position Through Wall Specification RHFE-308 FTRPage Service Contact

RHFE-308 FTR specifications

The Rinnai RHFE-308 FTR is an advanced heating appliance designed to deliver efficient and comfortable warmth, especially in residential settings. It has become a popular choice for homeowners seeking reliable heating solutions that also emphasize energy efficiency and sustainability.

One of the standout features of the Rinnai RHFE-308 FTR is its innovative technology known as "Flue Gas Heat Recovery." This technology allows the heater to utilize the heat generated by combustion to enhance the overall efficiency of the unit. By capturing and repurposing flue gases, the RHFE-308 FTR can provide superior heating performance while minimizing energy waste, making it an environmentally friendly option.

The unit is equipped with a powerful burner system that generates impressive heat output while maintaining low emissions. This not only ensures effective heating but also complies with stringent environmental regulations, contributing to a cleaner atmosphere. Additionally, the Rinnai RHFE-308 FTR is designed to operate quietly, allowing homeowners to enjoy a warm and peaceful environment.

Ease of use is another appealing characteristic of the RHFE-308 FTR. It features a user-friendly control panel, which allows for precise temperature adjustments. Homeowners can set their desired comfort level with just a few simple clicks. This model also includes programmable timer options, enabling users to schedule heating times that align with their daily routines, further enhancing convenience and energy savings.

The compact and sleek design of the RHFE-308 FTR ensures that it can easily blend into various interior styles without looking out of place. It’s also lightweight, making installation straightforward for both professional technicians and savvy DIY enthusiasts. The unit’s construction emphasizes durability, featuring high-quality materials that ensure longevity and reliable performance over time.

Safety is a paramount consideration in the design of the Rinnai RHFE-308 FTR. It comes with multiple safety features, such as overheat protection and a child safety lock, providing peace of mind for families.

Overall, the Rinnai RHFE-308 FTR stands out as a versatile and efficient heating solution. With its advanced technology, user-friendly features, and emphasis on safety, it offers a comfortable and reliable heating experience for modern homes.
Top Page Image Contents