Rosewill RXS-4324, RXS-3323 user manual Video Quality of the Device

Page 63

Internet Camera RXS-3323/RXS-4324User Manual

 

changed in order for the device to be accessible outside your LAN.

 

• Make sure that the device isn’t conflicting with any other web server running on your

 

LAN.

 

• Check the configuration of the router settings allow the device to be accessed outside

 

your local LAN.

 

• Check the bandwidth of Internet connection. If the Internet bandwidth is lower than

 

target bit rate, the video streaming will not work correctly.

 

 

The unreadable characters

Use the operating system of the selected language. Set the Encoding or the Character

are displayed.

Set of the selected language on the Internet Explorer.

 

 

Frame rate is slower than

• The traffic of the network and the object of the image affect the frame rate. The

the setting.

network congestion causes frame rate slower than the setting.

 

• Check the bandwidth of Internet connection. If the Internet bandwidth is lower than

 

target bit rate, the video streaming will not work correctly.

 

• Ethernet switching hub can smooth the frame rate.

 

 

Blank screen or very slow

• Your connection to the device does not have enough bandwidth to support a higher

video when audio is

frame rate for the streamed image size. Try reducing the video streaming size to

enabled.

160x120 or 320x240 and/or disabling audio.

 

• Audio will consume 32 kbps. Disable audio to improve video. Your Internet

 

connection may not have enough bandwidth to support streaming audio from the

 

device.

 

 

Image Transfer on e-mail

• Default Gateway and DNS server address should be set up correctly.

or FTP does not work.

• If FTP does not work properly, ask your ISP or network administrator about the

 

transferring mode of FTP server.

 

 

Pan/Tilt does not work.

• Click [Refresh] on the Internet Explorer when the communication stops with the

(including Click to Center

device. The image will refresh.

and Preset Positioning)

• Other clients may be operating Pan/Tilt.

 

• Pan/Tilt operation has reached the end of corner.

 

 

Pan/Tilt does not work

There may be a slight delay when you are using the Pan/Tilt feature in conjunction

smoothly.

with streaming audio and video. If you find that there is a significant delay while

 

panning or tilting the camera, try disabling the audio streaming and/or reducing the

 

video streaming size.

 

 

 

Video Quality of the Device

The focus on the Camera

• The lens may be dirty or dust is attached. Fingerprints, dust, stain, etc. on the lens can

is bad.

degrade the image quality.

 

 

The color of the image is

• Adjust White Balance.

poor or strange.

• To insure the images you are viewing are the best they can be, set the Display

 

property setting (color quality) to 16bit at least and 24 bit or higher if possible within

 

your computer.

 

 

63

Image 63
Contents User Manual Wired Internet Camera RXS-3323 Wireless Internet Camera RXS-4324National Restrictions FCC STATEMENTFCC RF Radiation Exposure Statement CE Mark WarningChapter 1. Product Overview Table of ContentChapter 2. Installation Chapter 3. Connecting to the CameraAppendix A Restore Factory Default Settings Chapter 1. Product Overview Package Contents3. Quick Installation Guide 5. RJ 45 Cable 6. 12V/1A Power Adapter 7. Camera Mount Kitz 2-Way Audio Capability Product FeaturesSystem Requirements z H2.64, MPEG4, and MJPEG Tri-Codec supportedz Supports Multiple Profiles z Remote Control SupportedHighlights z Optimal Viewingeasily IR LEDs Introduction of HardwareFront View Power and WirelessFactory Default Reset Rear ViewPower Jack Antenna ConnectorCeiling Mount Hardware InstallationCamera LAN and Power Installation Chapter 2. InstallationSoftware Installation IPWizard II InstallationWall Mount 4.Click on “Run” to continue 3.Please click on “IPWizard” under “Software & Tools” to continue6.Click on “Next” to continue 7.Click on “Finish” to finish the installationDouble Click on the above information bar will open up the Camera Using IPWizardChapter 3. Connecting to the Camera management page in your default Web Browservideo from the 9. Wireless14. WiFi One click to view theWireless Page You should see the confirmation Status Window popup as below. Please select “OK” to confirm these settings User Manual Opening up UPnP in Win XP Access the device using IE for the first timeThree ways to access the Camera for the first time Managing the Cameraz Open Control Panel z Click on Network and Internet Opening up Network Discovery in Win7z Click on View Network Computers and devices Entering into Camera’s Management page via IE z Upon selecting the “Install This Add-on for All User on This Computer”, you will see an Security Warning Window asking your permission to install the Rosewill Media Control. Please click “Install” to continute Language Management PageSettings Streaming11. Statistics 10. VolumeSnapshot RecordNetwork SettingNetwork Chapter 4. Managing the Device1. MAC address 2. Obtain IP address automatically DHCP 3. IP address 4. Subnet mask 5. Gateway 6. Obtain DNS from DHCP 7. Primary DNS8. Secondary DNS 9. HTTP Port Wireless 1. Setting Easy Installation 2. Site survey 3. MAC address4. Interface Select 5. Type 9. Security mode 6. SSID7. BSSID 8. Channel1. DDNS 2. Server name 3. DDNSHost 4. User name 5. Password DDNS4. IP address, Subnet mask, and Gateway read only 5. Status PPPoEStreaming 1. PPPoE 2. User name 3. Password1. RTSP Port 2. RTP Port UPnP5. External IP address BonjourIP Filter 1. UPnP 2. Friendly Name 3. UPnP NAT Traversal 4. Port Range1. SMTP Notification e-mail 2. Send To 3. Subject IP Notification11. HTTP Login Password 12. Proxy Address 13. Proxy Port CameraPicture 8. HTTP Notification 9. URL 10. HTTP Login NameLED OFF Threshold 0~10000 2. White Balance 3. Exposure Control 4. Color Level 5. Brightness6. Sharpness 7. Contrast 8. Night Mode 9. White-Light LED LED ON Threshold 0~10000Preset Setting Tour Setting10. De-Noise 1. DIPS Dynamic IP Service 2. Device ID for DIPS SystemSystem 1. Tour Name 2. Running 3. Preset 4. Wait Time3. Device Title 4. Software Version 5. Network LED Date & Time6. Power LED Wireless LED 7. Log 8. Reload 3. Adjust4. Restore Setting Maintenance1. Hard Factory Default Include the network setting 2. Factory Default Except the network setting 3. Backup Setting6. System Restart 5. Firmware Upgrade procedure1. Text Overlay Setting 2. Video Profile VideoCommon Video Profile4. GOP Control ROI 1 The area size of ROI 1 is H.264 / QVGA, 320 x ROI 0 The area size of ROI 0 is H.264 / VGA, 640 xAudio User1. Audio 2. Audio Mode 3. Input Gain 4. Output Gain E-Mail 3. Add, update, and remove of Users account1. SMTP Server 2. Test 3. SMTP Port 4. SMTP 1. Add and Del 2. Included or Excluded Window 3. Name 4. Object Size Object DetectionAuthentication 5. Authentication User name 6. Authentication Password 7. E-mail To 8. E-mail From 9. E-mail Subject1. Name 2. FTP Server 3. Test 4. FTP Login name 5. FTP Login Password Event ServerFTP Server TCP ServerHTTP Server 1. Name 2. TCP Server 3. TCP Port1. Name 1. Name 2. SAMBA Server 3. Test 4. SAMBA Login name 5. SAMBA Login SAMBA Server2. URL 3. Test 4. HTTP Login name 5. HTTP Login Password 6. Proxy Address 7. Proxy Login name 8. Proxy Login Password1. Name 2. Enable 3. Type 4. Enable Time 5. Trigger by 6. Action SettingEvent Schedule Password 6. SAMBA Path1. Record File Type 2. Record File Prefix 3. JPEG Picture Numbers RecordAdding Preset point Advance PTZ2. PTZ 2. Please right click on it and select “Temporarily Allow Scripted Windows” Digital Zoom SnapshotSelecting Tour Record VolumeRestore the device Appendix A Restore Factory Default SettingsQuestion Appendix B Troubleshooting & FAQFeatures Install the DeviceUPnP Connection Access the DeviceNetwork Camera’s private IP address Video Quality of the Device Miscellaneous Appendix C Ping IP Address Average bit rate for Appendix D Bandwidth EstimationImage Resolution Average range of data sizesAppendix E Specifications 0 ~ 355 180/ second MAX Appendix F Configure Port Forwarding Manually 2 Access the Router with Your Web browser1 Assign a local/fixed IP address to your device Your WAN IP will be listed here 3 Open/set Virtual Server Ports to enable remote image viewingPort section, click Apply 2 Environment of Dynamic IP Network Appendix G DDNS ConfigurationProcess of set up your own Domain Name 1 Environment of Fixed Valid IP Networka. Username b. E-mail address and confirmation c. Password and confirmation3. After the columns show up at the left side, click “Create Account” 4. Fill the application agreement and necessary informationUser Manual 9. Click the “ Dynamic DNS ” 8. Click the “Services”10. Click the “Get Started” iPhone Appendix H 3GPP and iPhone
Related manuals
Manual 14 pages 54.86 Kb