Camera, Picture, Message, Rotation | Rosewill RXS-4324, RXS-3323

Page 37

Internet Camera RXS-3323/RXS-4324		User Manual

4.TCP Notification:

5.TCP Server:

6.TCP Port:

7.Message:

8.HTTP Notification:

9.URL:

10.HTTP Login Name:

11.HTTP Login Password:

12.Proxy Address:

13.Proxy Port:

14.Proxy Login Name:

15.Proxy Login Password:

16.Customer Parameters:

17.Message:

If enable this function, then the “TCP Server“, “TCP Port”, and “Message” fields need to be filled.

Type the server name or the IP address of the TCP server. Set port number of TCP server.

Type the Message for the TCP Server.

If enable this function, then the “URL”, “HTTP Login Name”, “HTTP

Login Password”, “Proxy Address”, “Proxy Port”, “Proxy Login Name”, “Proxy Login Password”, “Customer Parameters”, “Message” fields need

to be filled.

Type the server name or the IP address of the HTTP server.

Type the user name for the website.

Type the server name or the IP address of the HTTP Proxy.

Set port number for the proxy.

Type the user name for the proxy.

Type the password for the proxy.

User can set specific parameters to HTTP server.

The message will be sent to HTTP server.

- Camera

Use this menu to set the functions of the camera settings of the device.

Picture:

1. Rotation:

Turn the “Mirror” and “Vertical Flip” On or OFF. The image will be overturned as below.

Contents User Manual Wired Internet Camera RXS-3323 Wireless Internet Camera RXS-4324FCC RF Radiation Exposure Statement FCC STATEMENTCE Mark Warning National RestrictionsChapter 2. Installation Table of ContentChapter 3. Connecting to the Camera Chapter 1. Product OverviewAppendix A Restore Factory Default Settings 3. Quick Installation Guide Package Contents5. RJ 45 Cable 6. 12V/1A Power Adapter 7. Camera Mount Kit Chapter 1. Product OverviewSystem Requirements Product Featuresz H2.64, MPEG4, and MJPEG Tri-Codec supported z 2-Way Audio CapabilityHighlights z Remote Control Supportedz Optimal Viewing z Supports Multiple Profileseasily Front View Introduction of HardwarePower and Wireless IR LEDsPower Jack Rear ViewAntenna Connector Factory Default ResetCamera LAN and Power Installation Hardware InstallationChapter 2. Installation Ceiling MountIPWizard II Installation Software InstallationWall Mount 4.Click on “Run” to continue 3.Please click on “IPWizard” under “Software & Tools” to continue6.Click on “Next” to continue 7.Click on “Finish” to finish the installationChapter 3. Connecting to the Camera Using IPWizardmanagement page in your default Web Browser Double Click on the above information bar will open up the Camera14. WiFi 9. WirelessOne click to view the video from theWireless Page You should see the confirmation Status Window popup as below. Please select “OK” to confirm these settings User Manual Three ways to access the Camera for the first time Access the device using IE for the first timeManaging the Camera Opening up UPnP in Win XPz Open Control Panel z Click on Network and Internet Opening up Network Discovery in Win7z Click on View Network Computers and devices Entering into Camera’s Management page via IE z Upon selecting the “Install This Add-on for All User on This Computer”, you will see an Security Warning Window asking your permission to install the Rosewill Media Control. Please click “Install” to continute Settings Management PageStreaming LanguageSnapshot 10. VolumeRecord 11. StatisticsNetwork SettingChapter 4. Managing the Device Network4. Subnet mask 5. Gateway 6. Obtain DNS from DHCP 7. Primary DNS 1. MAC address 2. Obtain IP address automatically DHCP 3. IP address8. Secondary DNS 9. HTTP Port 1. Setting Easy Installation 2. Site survey 3. MAC address Wireless4. Interface Select 5. Type 7. BSSID 6. SSID8. Channel 9. Security mode1. DDNS 2. Server name 3. DDNSHost 4. User name 5. Password DDNSStreaming PPPoE1. PPPoE 2. User name 3. Password 4. IP address, Subnet mask, and Gateway read only 5. Status1. RTSP Port 2. RTP Port UPnPIP Filter Bonjour1. UPnP 2. Friendly Name 3. UPnP NAT Traversal 4. Port Range 5. External IP address1. SMTP Notification e-mail 2. Send To 3. Subject IP NotificationPicture Camera8. HTTP Notification 9. URL 10. HTTP Login Name 11. HTTP Login Password 12. Proxy Address 13. Proxy Port6. Sharpness 7. Contrast 8. Night Mode 9. White-Light LED 2. White Balance 3. Exposure Control 4. Color Level 5. BrightnessLED ON Threshold 0~10000 LED OFF Threshold 0~10000Tour Setting Preset Setting10. De-Noise System System1. Tour Name 2. Running 3. Preset 4. Wait Time 1. DIPS Dynamic IP Service 2. Device ID for DIPS6. Power LED Wireless LED 7. Log 8. Reload Date & Time3. Adjust 3. Device Title 4. Software Version 5. Network LED1. Hard Factory Default Include the network setting Maintenance2. Factory Default Except the network setting 3. Backup Setting 4. Restore Setting6. System Restart 5. Firmware Upgrade procedureCommon VideoVideo Profile 1. Text Overlay Setting 2. Video Profile4. GOP Control ROI 1 The area size of ROI 1 is H.264 / QVGA, 320 x ROI 0 The area size of ROI 0 is H.264 / VGA, 640 xUser Audio1. Audio 2. Audio Mode 3. Input Gain 4. Output Gain 3. Add, update, and remove of Users account E-Mail1. SMTP Server 2. Test 3. SMTP Port 4. SMTP Authentication 5. Authentication User name 6. Authentication Password Object Detection7. E-mail To 8. E-mail From 9. E-mail Subject 1. Add and Del 2. Included or Excluded Window 3. Name 4. Object SizeFTP Server Event ServerTCP Server 1. Name 2. FTP Server 3. Test 4. FTP Login name 5. FTP Login Password1. Name 2. TCP Server 3. TCP Port HTTP Server1. Name 2. URL 3. Test 4. HTTP Login name 5. HTTP Login Password SAMBA Server6. Proxy Address 7. Proxy Login name 8. Proxy Login Password 1. Name 2. SAMBA Server 3. Test 4. SAMBA Login name 5. SAMBA LoginEvent Schedule SettingPassword 6. SAMBA Path 1. Name 2. Enable 3. Type 4. Enable Time 5. Trigger by 6. Action1. Record File Type 2. Record File Prefix 3. JPEG Picture Numbers RecordAdvance PTZ Adding Preset point2. PTZ 2. Please right click on it and select “Temporarily Allow Scripted Windows” Snapshot Digital ZoomSelecting Tour Record VolumeRestore the device Appendix A Restore Factory Default SettingsFeatures Appendix B Troubleshooting & FAQInstall the Device QuestionUPnP Connection Access the DeviceNetwork Camera’s private IP address Video Quality of the Device Miscellaneous Appendix C Ping IP Address Image Resolution Appendix D Bandwidth EstimationAverage range of data sizes Average bit rate forAppendix E Specifications 0 ~ 355 180/ second MAX 2 Access the Router with Your Web browser Appendix F Configure Port Forwarding Manually1 Assign a local/fixed IP address to your device Your WAN IP will be listed here 3 Open/set Virtual Server Ports to enable remote image viewingPort section, click Apply Process of set up your own Domain Name Appendix G DDNS Configuration1 Environment of Fixed Valid IP Network 2 Environment of Dynamic IP Network3. After the columns show up at the left side, click “Create Account” c. Password and confirmation4. Fill the application agreement and necessary information a. Username b. E-mail address and confirmationUser Manual 9. Click the “ Dynamic DNS ” 8. Click the “Services”10. Click the “Get Started” iPhone Appendix H 3GPP and iPhone