Rosewill RXS-3323, RXS-4324 Ddns, DDNS 2. Server name 3. DDNSHost 4. User name 5. Password

Page 32

Internet Camera RXS-3323/RXS-4324

User Manual

 

 

 

DDNS:

DDNS: Stands for Dynamic Domain Name Server

Your Internet Service Provider (ISP) provides you at least one IP address which you use to connect to the Internet. The address you get may be static, meaning it never changes, or dynamic, meaning it’s likely to change periodically. Just how often it changes, depends on your ISP. A dynamic IP address complicates remote access since you may not know what your current WAN IP address is when you want to access your device over the Internet. One of the possible solutions to the dynamic IP address problem comes in the form of a dynamic DNS service.

A dynamic DNS service is unique because it provides a means of updating your IP address so that your listing will remain current when your IP address changes. There are several excellent DDNS services available on the Internet. One such service you can use is www.DynDNS.org. You’ll need to register with the service and set up the domain name of your choice to begin using it. Please refer to the home page of the service for detailed instructions or refer to Appendix G for more information.

If your device is connected to xDSL directly, you might need this feature. However, if your device is behind a NAT router, you will not need to enable this feature because your NAT router should take care of this job. As to xDSL environment, most of the users will use dynamic IP addresses. If users want to set up a web or a FTP server, then the Dynamic Domain Name Server is necessary.

1.DDNS:

2.Server name:

3.DDNSHost:

4.User name:

5.Password:

To enable or disable the DDNS service here. Choose the built-in DDNS server.

The domain name is applied of this device. The user name is used to log into DDNS. The password is used to log into DDNS.

.

32

Image 32
Contents Wired Internet Camera RXS-3323 Wireless Internet Camera RXS-4324 User ManualFCC STATEMENT FCC RF Radiation Exposure StatementCE Mark Warning National RestrictionsTable of Content Chapter 2. InstallationChapter 3. Connecting to the Camera Chapter 1. Product OverviewAppendix A Restore Factory Default Settings Package Contents 3. Quick Installation Guide5. RJ 45 Cable 6. 12V/1A Power Adapter 7. Camera Mount Kit Chapter 1. Product OverviewProduct Features System Requirementsz H2.64, MPEG4, and MJPEG Tri-Codec supported z 2-Way Audio Capabilityz Remote Control Supported Highlightsz Optimal Viewing z Supports Multiple Profileseasily Introduction of Hardware Front ViewPower and Wireless IR LEDsRear View Power JackAntenna Connector Factory Default ResetHardware Installation Camera LAN and Power InstallationChapter 2. Installation Ceiling MountWall Mount Software InstallationIPWizard II Installation 3.Please click on “IPWizard” under “Software & Tools” to continue 4.Click on “Run” to continue7.Click on “Finish” to finish the installation 6.Click on “Next” to continueUsing IPWizard Chapter 3. Connecting to the Cameramanagement page in your default Web Browser Double Click on the above information bar will open up the Camera9. Wireless 14. WiFiOne click to view the video from theWireless Page You should see the confirmation Status Window popup as below. Please select “OK” to confirm these settings Internet Camera RXS-3323/RXS-4324 Access the device using IE for the first time Three ways to access the Camera for the first timeManaging the Camera Opening up UPnP in Win XPOpening up Network Discovery in Win7 z Open Control Panel z Click on Network and Internetz Click on View Network Computers and devices Entering into Camera’s Management page via IE z Upon selecting the “Install This Add-on for All User on This Computer”, you will see an Security Warning Window asking your permission to install the Rosewill Media Control. Please click “Install” to continute Management Page SettingsStreaming Language10. Volume SnapshotRecord 11. StatisticsSetting NetworkChapter 4. Managing the Device Network8. Secondary DNS 9. HTTP Port 1. MAC address 2. Obtain IP address automatically DHCP 3. IP address4. Subnet mask 5. Gateway 6. Obtain DNS from DHCP 7. Primary DNS 4. Interface Select 5. Type Wireless1. Setting Easy Installation 2. Site survey 3. MAC address 6. SSID 7. BSSID8. Channel 9. Security modeDDNS 1. DDNS 2. Server name 3. DDNSHost 4. User name 5. PasswordPPPoE Streaming1. PPPoE 2. User name 3. Password 4. IP address, Subnet mask, and Gateway read only 5. StatusUPnP 1. RTSP Port 2. RTP PortBonjour IP Filter1. UPnP 2. Friendly Name 3. UPnP NAT Traversal 4. Port Range 5. External IP addressIP Notification 1. SMTP Notification e-mail 2. Send To 3. SubjectCamera Picture8. HTTP Notification 9. URL 10. HTTP Login Name 11. HTTP Login Password 12. Proxy Address 13. Proxy Port2. White Balance 3. Exposure Control 4. Color Level 5. Brightness 6. Sharpness 7. Contrast 8. Night Mode 9. White-Light LEDLED ON Threshold 0~10000 LED OFF Threshold 0~1000010. De-Noise Preset SettingTour Setting System System1. Tour Name 2. Running 3. Preset 4. Wait Time 1. DIPS Dynamic IP Service 2. Device ID for DIPSDate & Time 6. Power LED Wireless LED 7. Log 8. Reload3. Adjust 3. Device Title 4. Software Version 5. Network LEDMaintenance 1. Hard Factory Default Include the network setting2. Factory Default Except the network setting 3. Backup Setting 4. Restore Setting5. Firmware Upgrade procedure 6. System RestartVideo CommonVideo Profile 1. Text Overlay Setting 2. Video Profile4. GOP Control ROI 0 The area size of ROI 0 is H.264 / VGA, 640 x ROI 1 The area size of ROI 1 is H.264 / QVGA, 320 x1. Audio 2. Audio Mode 3. Input Gain 4. Output Gain AudioUser 1. SMTP Server 2. Test 3. SMTP Port 4. SMTP E-Mail3. Add, update, and remove of Users account Object Detection Authentication 5. Authentication User name 6. Authentication Password7. E-mail To 8. E-mail From 9. E-mail Subject 1. Add and Del 2. Included or Excluded Window 3. Name 4. Object SizeEvent Server FTP ServerTCP Server 1. Name 2. FTP Server 3. Test 4. FTP Login name 5. FTP Login Password1. Name HTTP Server1. Name 2. TCP Server 3. TCP Port SAMBA Server 2. URL 3. Test 4. HTTP Login name 5. HTTP Login Password6. Proxy Address 7. Proxy Login name 8. Proxy Login Password 1. Name 2. SAMBA Server 3. Test 4. SAMBA Login name 5. SAMBA LoginSetting Event SchedulePassword 6. SAMBA Path 1. Name 2. Enable 3. Type 4. Enable Time 5. Trigger by 6. ActionRecord 1. Record File Type 2. Record File Prefix 3. JPEG Picture Numbers2. PTZ Adding Preset pointAdvance PTZ 2. Please right click on it and select “Temporarily Allow Scripted Windows” Selecting Tour Digital ZoomSnapshot Volume RecordAppendix A Restore Factory Default Settings Restore the deviceAppendix B Troubleshooting & FAQ FeaturesInstall the Device QuestionAccess the Device UPnP ConnectionNetwork Camera’s private IP address Video Quality of the Device Miscellaneous Appendix C Ping IP Address Appendix D Bandwidth Estimation Image ResolutionAverage range of data sizes Average bit rate forAppendix E Specifications 0 ~ 355 180/ second MAX 1 Assign a local/fixed IP address to your device Appendix F Configure Port Forwarding Manually2 Access the Router with Your Web browser 3 Open/set Virtual Server Ports to enable remote image viewing Your WAN IP will be listed herePort section, click Apply Appendix G DDNS Configuration Process of set up your own Domain Name1 Environment of Fixed Valid IP Network 2 Environment of Dynamic IP Networkc. Password and confirmation 3. After the columns show up at the left side, click “Create Account”4. Fill the application agreement and necessary information a. Username b. E-mail address and confirmationInternet Camera RXS-3323/RXS-4324 8. Click the “Services” 9. Click the “ Dynamic DNS ”10. Click the “Get Started” Appendix H 3GPP and iPhone iPhone
Related manuals
Manual 14 pages 54.86 Kb