•Position the rear grille against the front of the motor housing with the handle uppermost, ensuring that the locating pegs on the motor housing are engaged correctly in the holes in the grille.
•Screw the grille retaining ring onto the projecting thread on the motor housing, by rotating clockwise and tighten firmly.
•Place the fan blade onto the motor spindle, locating the slot at the back of the blade on the drive pin that passes through the motor spindle.
•Screw the blade retaining knob onto the motor spindle by rotating it anticlockwise, and tighten firmly against the front of the blade.
•Position the front grille against the rear grille so that the holes in the rims that accept the small nut and bolt are in line. Insert the bolt through the holes and screw on the nut. Do not fully tighten at this stage.
•Move the grille retaining clips into position ensuring that they engage correctly on the rim of the grille.
•Fully tighten the small nut and bolt that passes through the rim of the grille.
USE
WARNING:
In order to reduce the risk of fire or electric shock, never use the appliance together with an electronic timer.
•Insert the plug a suitable socket.
•To adjust the up and down angle of the airflow, loosen the head clamping screw and tilt the head up or down to the required position.
•The height of the fan can be adjusted by loosening the height adjustment ring on the column, carefully raising or lowering the fan to the height required and then firmly
•Fit 2 AAA size batteries (not supplied) into the remote controller, ensuring they are inserted the correct way round as indicated by the detail marked in the bottom of the battery compartment. When the batteries are exhausted, dispose of them in the proper manner and in accordance with local regulations.
•The hand held remote controller is directional and must be pointed towards the fan control panel to be effective. The operating range can be up to 8 metres depending on the state of the batteries and the local environment.
All the features detailed below can be selected either directly by hand on the body of the fan or by means of the remote controller.
•When the fan is plugged into a working power socket the POWER on indicator will illuminate.
•Pressing ON/SPEED or OFF button will turn the fan ON or OFF.
•With the fan on, pressing the ON/SPEED button will select the speeds LOW, MEDIUM and HIGH in order and the red LED next to the speed selected will be illuminated.
Timer:
With the fan running, pressing the TIMER button will select running times of 0.5 hour to 7.5 hours (0.5 hour per step). The appropriate red LED lights will illuminate according to the time set. The fan will switch off after the time selected has elapsed. The LED lights will show the time remaining until the fan stops.
Example: with 7.5 hours set, all 4 time indicators will be on as 4+2+1+0.5 = 7.5
The timer can be used for all 3 different modes (NORMAL, NATURE or SLEEP).
Mode selection:
With the fan running, pressing the MODE button will select the modes NATURE, SLEEP and NORMAL in order and in the case of NATURE and SLEEP modes, the red LED next to the mode chosen
will be illuminated.
In NORMAL mode no LED will be illuminated and constant speeds of either LOW, MEDIUM or HIGH can be selected.
Nature mode:
In NATURE mode, the speed varies continuously, to simulate the variable effect of a natural breeze.
3 different speed settings can be selected for the NATURE mode, by selecting fan speed (Low, Mid or High).
Sleep mode:
In SLEEP mode, the fan speed varies according to the same pattern as in NATURE mode but the speed will diminish to take account of the fact that a sleeping person’s temperature decreases slightly as they sleep.
If LOW speed is selected initially in SLEEP mode, the fan works in LOW SLEEP mode until the preset time is up or the fan is turned off.
Oscillation:
With the fan running pressing the SWING button will activate or
Caution: The fan should always be switched off when making any adjustment to height or head angle.
CLEANING
•Always switch the fan off and unplug it before cleaning.
•Clean the plastic parts using a damp cloth and a mild detergent, and ensure that all detergent residue is removed.
•Never use abrasive cleaning agents or solvents.
•Do not immerse in any form of liquid.
INFORMATION ON DISPOSAL AND RECYCLING OF THIS PRODUCT
Please note that this Adexi product is marked with this symbol: 
. This means that this product must not be disposed of together with ordinary household waste, as electrical and electronic waste must be disposed of separately. In accordance with the WEEE directive, every member state must ensure correct collection, recovery, handling and recycling of electrical and electronic waste. Private households in the EU can take used equipment to special recycling stations free of charge. In some member states you can in certain cases return the used equipment to the retailer from whom you purchased it, if you are purchasing new equipment. Contact your retailer, distributor or the municipal authorities for further information on what you should do with electrical and electronic waste.
THE GUARANTEE DOES NOT APPLY
•If the instructions given above are not observed.
•If the appliance has been mishandled, subjected to rough treatment, or has suffered any other form of damage.
•For faults that may have arisen as a result of faults in your electricity supply.
•If the appliance has been subject to unauthorised repairs.
Due to the constant development of our products in terms of function and design, we reserve the right to make changes to the product without prior warning.
IMPORTER
Adexi Group
We cannot be held responsible for any printing errors.
11