Home Automation II owner manual Set Up Dial

Page 68

Set Up Dial

The Set Up Dial menu is used to configure all of the telephone related items for the OmniPro II. To enter the Set Up Dial menu, from the Setup menu, press the 4 (DIAL) key. Use the arrows to scroll through the items. For each item, the top line displays a description of the item and its current setting. The bottom line shows the available ranges for your selections.

Phone numbers can be up to 24 characters long. The number is shown on the bottom line of the display. Press the OFF key to enter a ' - ' into the number. Press the DAY key to specify a pause of 2 seconds (shown as a "T" on the display). Press the NIGHT key to enter a ' # ' into the number. Enter a single ' - ' for no number.

Telephone Access

The Telephone Access item allows you to turn the local (in-house) and remote telephone control feature on and off.

If set to On, the OmniPro II will allow local and remote telephone access as described in Telephone Control. If set to Off, the OmniPro II will not answer incoming calls ever, and will not work on the in house phones. Dial outs will still occur, and the system will operate normally when the OmniPro II dials out.

If you do not have your OmniPro II connected to a phone line, set Telephone Access to Off to keep the system from displaying "PHONE LINE DEAD". The default setting for Telephone Access is On.

Answer Outside Call

If you do not want your system to Answer Outside Call, set this item to No. The local (in-house) telephone control features will still work, but the system will never answer an incoming call.

The default setting for Answer Outside Call is Yes.

Remote Commands

The Remote Commands Ok item allows you to prevent any commands from being issued from a remote telephone.

If Remote Commands Ok is set to Yes, the OmniPro II will allow all commands to be executed when called from a remote telephone. If Remote Commands Ok is set to No, then lights, appliances, and the security system cannot be controlled from a remote telephone that dials into your home.

You can issue commands from a local (in-house) phone with Remote Commands Ok set to Yes or No. The default setting is Yes.

Rings Before Answer

Your phone must ring this number of times before the OmniPro II will answer an incoming call to your phone.

To change Rings Before Answer, enter the new number from 1 to 15, then press the ' # ' key. The factory default setting is 8.

Dial Type

The Dial Type specifies the type of dialing used when the OmniPro II dials out. If you do not have Touch-Tone service, then Dial Type must be set to Pulse.

The default Dial Type is Tone.

My Phone Number

My Phone Number is the phone number that will be announced when the OmniPro II dials out in the event of an alarm. It should be set to the phone number of the premises where your system is installed.

To enter phone numbers, press the keypad keys 0 - 9. You can put in a dash (-) for legibility by pressing the Off key.

Press the ' # ' key after you have pressed all of the digits in the phone number. For example, to enter the number 555-1234, press 555 "OFF" 1234 #.

Page 60

Page 67 Page 69
Image 68
Page 67 Page 69
Contents Home AUTOMATION, INC Copyright 2001-2003 Home Automation, Inc All Rights Reserved Contents Control Telephone Control Page Fire Escape Planning Instructions to Called PartyPage Model Number Serial Number IntroductionUnderwriters Laboratories UL Listing Overall Description Console OperationNormal Top-Level Display Display MenusError Beeps Main MenuTrouble Beeps To silence the beeper, press the * keyOmniPro II Maintenance CancelAreas Confirmation BeepDisarming the Security System and Silencing Alarms Security System OperationArming the Security System = OFFUsing Shortcut Keys = Night DLY Night Delay= Night = Vacation= Restore Quick ArmBypassing Zones Restoring ZonesWhat To Do When You Come Home What Happens When the Alarm is ActivatedBurglar Alarm Activated Burglar ALARM! Zone Name TrippedEmergency Keys Fire Alarm ActivatedGas Alarm Activated Alarm Cancel Duress Code Entered or Duress Alarm ActivatedAlarm Reset Master Code Trouble IndicationsCodes Panic Switches Duress CodeArea Arming Manager CodeGoto Area Testing Your System Control Commands ALC Switch ModulesControl ModulesHouse Codes Unit NumbersScrolling Through Names Lighting Level Controlling UnitsDimming and Brightening Scene Command Compose Timed CommandsRamp Command Status of a Unit Internal FlagsControlling Outputs All On / OffLeviton Scene Control ScenesButtons Temperature Control HAI RC-Series ThermostatsIf hold mode is On, Hold is shown Programmable Energy Saver Modules PESMs Freeze Alarms Important NotesTemperature Alarms Outdoor TemperatureTemperature Control of Appliances HumidityStatus Through Event Log Show EventsMessages Record Memo MessagePlay Memo Message Clear Text MessagesShow Message Log MessageClear Message Say MessageSend Message Pro-Link Telephone Control Telephone InterfaceIn-House Phones Remote PhonesPhone Access Denied Remote Lockout Temperature Status Event Phone GOOD-BYE Cancel RepeatAlternate Method Main MenuTemperature ControlSecurity ButtonWhen an HAI Communicating Thermostat is entered Hold # Status CancelWhen a Programmable Energy Saver Pesm is entered Heat Setting Cool Setting Timed # Status * CancelPlaying and Recording a Custom Phrase MessagePlaying and Recording a Message Playing and Recording the Address Good-ByePanic Button over the Phone # # # # # # Emergency Dial-Out Digital DialerVoice Dialer How the OmniPro II Voice Dialer WorksEntering the Code PC AccessWhat You Hear If Your OmniPro II Calls You Connecting to Network via PC Access Built-In Ethernet PortController IP Address, Port Number, and Encryption Key OmniPro II Ethernet ConnectionsDynamic DNS 192.168.0.101 Hub or HAI OmniPro IIRouter ControllerLocal / Wide Area Network Set Up Codes SetupConfiguration and Advanced Control Programming ACP Set Up Time Duress Code= Show Programs Advanced Control Programming ACP= Add Programs Otherwise, a help screen is displayed Edit Programs = Delete All ProgramsTimes Programs Edit When 1=TIMED 2=BUTTONEdit Programs When Button and Event Programs Control Unit Event / ALC Switch Press Event ButtonsSecurity Mode Event Buttons Zone Event Buttons Event Buttons Alarm Event ButtonsAll On/Off Event Buttons Miscellaneous Event Buttons Message Event Buttons Pro-LinkProgram Security Commands Edit Program CommandProgram Control Commands Program Button Commands Program All On / All Off CommandsProgram Temperature Commands Program Message CommandsProgram Security Mode Conditions Edit Program ConditionProgram Control Conditions Program Zone ConditionsProgram Time Clock Conditions Program Other ConditionsSet Up Dial Dial Out Number Dial OUT 1 on Dial OUT 1 OFFDial Out Numbers Dial OrderSet Up Arming Set up Miscellaneous Format Number Description House Codes 2-16 X-10 All Off House Codes 2-16 X-10 All OnTime Clocks Time Clock 1 on Time Clock 1 OFFDaylight Savings Latitude, Longitude, and Time ZoneZone Name Controller Port Number Number DescriptionController IP Address Set Up Names Encryption KeySet Up Voice Set Up AddressUnderwriters Laboratories Requirements Fire Escape PlanningFederal Communication Commission Notice Home AUTOMATION, INC Powell Street Suite a NEW ORLEANS, LACanadian Industry Canada Notice If YOU have Trouble with Your PhonesAppendix a Dial OUT Planner OmniPro II Voice Dial-Out PlannerInstructions to Called Party Press 9. The system will say Good-bye and hang upSpace Appendix B Text Description Character CodesCode Char Appendix C Voice Description Codes Code DescriptionFault FallHello LowerSafety SwitchTemperature ServiceVolume VaultPhrase VCRPage

II specifications

Home Automation II represents the next evolution in smart home technology, providing users with greater flexibility, convenience, and security through advanced features and integrated systems. This smart home revolution focuses on the seamless interaction of devices and the automation of daily tasks, ultimately enhancing the overall living experience.

One of the key features of Home Automation II is interoperability among a wide range of devices. This enables homeowners to control lights, thermostats, security cameras, and other appliances from a single platform. Whether through smartphones, tablets, or voice-activated assistants, users can easily manage their home environment, monitor energy consumption, and receive real-time notifications. This level of integration not only simplifies operation but also creates a more cohesive smart home ecosystem.

Another significant aspect of Home Automation II is the use of artificial intelligence and machine learning. These technologies learn a homeowner’s habits and preferences, allowing the system to adapt automatically. For example, the thermostat can adjust temperatures based on the time of day and occupancy patterns, while lighting systems can simulate human presence when residents are away. This not only enhances comfort but also contributes to energy efficiency, leading to potential cost savings in utility bills.

Home Automation II offers enhanced security features as well. Smart locks, surveillance cameras, and motion detectors can all be integrated into the home’s network. This allows homeowners to monitor their property remotely, receive security alerts, and even grant access to visitors through mobile apps. Biometric security options, such as facial recognition, are also becoming more common, adding an extra layer of protection.

Furthermore, energy management technologies are a hallmark of Home Automation II. Smart plugs and sensors monitor energy use, providing insights to homeowners about how to reduce consumption. Advanced systems can even automate energy distribution, shifting usage to off-peak hours to alleviate strain on local grids and maximize efficiency.

Finally, voice control has become a prominent feature in Home Automation II, allowing users to operate devices hands-free. Integration with voice-activated platforms like Amazon Alexa, Google Assistant, and Apple Siri adds another layer of convenience, making it easy to control multiple aspects of the home with simple voice commands.

In conclusion, Home Automation II represents a significant step forward in creating intelligent spaces that are responsive to the needs of their users. Through the integration of cutting-edge technologies, enhanced security measures, energy management, and intuitive control options, the concept of a smart home is evolving into a more accessible and efficient reality.
Top Page Image Contents