Home Automation II owner manual Number Description, Controller IP Address, Controller Port Number

Page 75

DST START WEEKEND:

FIRST

SUNDAY

#=CHNG

↕

DST

END

MONTH:

 

10

1-12

0=DISABLE

 

↕

DST

END

WEEKEND:

 

↑

LAST SUNDAY

#=CHNG

Set the value for DST Start and End Months to "0" if Daylight Savings Time does not apply to your region, or to disable this automatic time update feature.

The DST Start and End Weekend takes place on the specified Sunday (1-7) at 2:00 AM.

To change the DST Start or End Weekend, press the ' # ' key, then use the arrow keys to scroll through the list. Press the ' # ' key to make the new selection.

NUMBER

DESCRIPTION

1

First Sunday

2

Second Sunday

3

Third Sunday

4

Fourth Sunday

5

Last Sunday

6

Next to Last Sunday

7

Third from Last Sunday

Controller IP Address

The controller’s local network IP address is used to identify the OmniPro II controller on the network. To view and assign the controller’s local network IP address, from the Set Up menu, press the 6 (MISC) key. Using the down arrow key (↓), scroll to the following menu item:

IP ADDRESS

192.168.0.101↕

The format of the IP address is a 32-bit numeric address written as four numbers separated by periods. An IP address has two components, the network address, and the host address. The first two numbers (e.g. 192.168) represent the Class B network address and must be the same as the first two numbers of your local network. The second two numbers (e.g. 0.101) identify a particular host on the local network and may be assigned at random as long as each device on the local network has a unique address. Each number can be 0 to 255. Enter the 1, 2, or 3 digit number followed by the “#” key to move to the next number. After the 4th number has been entered, press the “#” key to store the IP address.

Controller Port Number

The controller’s local network port number identifies the logical channel to the OmniPro II controller. For example, port 80 is used for HTTP traffic; the controller’s local network port number is used for Omni-Link traffic. To view and assign the controller’s local network port number, from the previous Setup item (IP ADDRESS), press the down arrow key (↓).

PORT NUMBER

4369

0-65535

↕

In most installations, the default port number can remain the same. Port numbers range from 0 to 65535. To change the port number, enter the new port number followed by the “#” key to store the port number. Port numbers 0 to 1024 are reserved for designated services and should not be used.

Page 67

Page 74 Page 76
Image 75
Page 74 Page 76
Contents Home AUTOMATION, INC Copyright 2001-2003 Home Automation, Inc All Rights Reserved Contents Control Telephone Control Page Instructions to Called Party Fire Escape PlanningPage Introduction Underwriters Laboratories UL ListingModel Number Serial Number Console Operation Overall DescriptionDisplay Menus Normal Top-Level DisplayTo silence the beeper, press the * key Error BeepsMain Menu Trouble BeepsConfirmation Beep OmniPro II MaintenanceCancel Areas= OFF Disarming the Security System and Silencing AlarmsSecurity System Operation Arming the Security System= Vacation Using Shortcut Keys= Night DLY Night Delay = NightRestoring Zones = RestoreQuick Arm Bypassing ZonesBurglar ALARM! Zone Name Tripped What To Do When You Come HomeWhat Happens When the Alarm is Activated Burglar Alarm ActivatedFire Alarm Activated Gas Alarm ActivatedEmergency Keys Duress Code Entered or Duress Alarm Activated Alarm ResetAlarm Cancel Trouble Indications CodesMaster Code Manager Code Panic SwitchesDuress Code Area ArmingGoto Area Testing Your System Modules Control CommandsALC Switch Modules ControlUnit Numbers House CodesScrolling Through Names Controlling Units Dimming and BrighteningLighting Level Timed Commands Ramp CommandScene Command Compose All On / Off Status of a UnitInternal Flags Controlling OutputsScenes Leviton Scene ControlButtons HAI RC-Series Thermostats Temperature ControlIf hold mode is On, Hold is shown Programmable Energy Saver Modules PESMs Important Notes Freeze AlarmsHumidity Temperature AlarmsOutdoor Temperature Temperature Control of AppliancesStatus Through Show Events Event LogClear Text Messages MessagesRecord Memo Message Play Memo MessageSay Message Show MessageLog Message Clear MessageSend Message Pro-Link Remote Phones Telephone ControlTelephone Interface In-House PhonesMain Menu Phone Access Denied Remote LockoutTemperature Status Event Phone GOOD-BYE Cancel Repeat Alternate MethodButton TemperatureControl SecurityHeat Setting Cool Setting Timed # Status * Cancel When an HAI Communicating Thermostat is enteredHold # Status Cancel When a Programmable Energy Saver Pesm is enteredMessage Playing and Recording a MessagePlaying and Recording a Custom Phrase Good-Bye Panic Button over the Phone # # # # # #Playing and Recording the Address How the OmniPro II Voice Dialer Works Emergency Dial-OutDigital Dialer Voice DialerPC Access What You Hear If Your OmniPro II Calls YouEntering the Code OmniPro II Ethernet Connections Connecting to Network via PC AccessBuilt-In Ethernet Port Controller IP Address, Port Number, and Encryption Key192.168.0.101 Hub or HAI OmniPro IIRouter Controller Dynamic DNSLocal / Wide Area Network Setup Configuration and Advanced Control Programming ACPSet Up Codes Duress Code Set Up TimeAdvanced Control Programming ACP = Add Programs= Show Programs Otherwise, a help screen is displayed = Delete All Programs Edit ProgramsEdit When 1=TIMED 2=BUTTON Edit Programs WhenTimes Programs Control Unit Event / ALC Switch Press Event Buttons Security Mode Event ButtonsButton and Event Programs Zone Event Buttons Alarm Event Buttons All On/Off Event ButtonsEvent Buttons Message Event Buttons Pro-Link Miscellaneous Event ButtonsEdit Program Command Program Control CommandsProgram Security Commands Program Message Commands Program Button CommandsProgram All On / All Off Commands Program Temperature CommandsProgram Zone Conditions Program Security Mode ConditionsEdit Program Condition Program Control ConditionsProgram Other Conditions Program Time Clock ConditionsSet Up Dial Dial Order Dial Out NumberDial OUT 1 on Dial OUT 1 OFF Dial Out NumbersSet Up Arming Set up Miscellaneous Format Number Description Time Clock 1 on Time Clock 1 OFF House Codes 2-16 X-10 All OffHouse Codes 2-16 X-10 All On Time ClocksLatitude, Longitude, and Time Zone Zone NameDaylight Savings Number Description Controller IP AddressController Port Number Encryption Key Set Up NamesSet Up Address Set Up VoiceFire Escape Planning Underwriters Laboratories RequirementsHome AUTOMATION, INC Powell Street Suite a NEW ORLEANS, LA Federal Communication Commission NoticeIf YOU have Trouble with Your Phones Canadian Industry Canada NoticeOmniPro II Voice Dial-Out Planner Appendix a Dial OUT PlannerPress 9. The system will say Good-bye and hang up Instructions to Called PartyAppendix B Text Description Character Codes Code CharSpace Code Description Appendix C Voice Description CodesLower FaultFall HelloService SafetySwitch TemperatureVCR VolumeVault PhrasePage

II specifications

Home Automation II represents the next evolution in smart home technology, providing users with greater flexibility, convenience, and security through advanced features and integrated systems. This smart home revolution focuses on the seamless interaction of devices and the automation of daily tasks, ultimately enhancing the overall living experience.

One of the key features of Home Automation II is interoperability among a wide range of devices. This enables homeowners to control lights, thermostats, security cameras, and other appliances from a single platform. Whether through smartphones, tablets, or voice-activated assistants, users can easily manage their home environment, monitor energy consumption, and receive real-time notifications. This level of integration not only simplifies operation but also creates a more cohesive smart home ecosystem.

Another significant aspect of Home Automation II is the use of artificial intelligence and machine learning. These technologies learn a homeowner’s habits and preferences, allowing the system to adapt automatically. For example, the thermostat can adjust temperatures based on the time of day and occupancy patterns, while lighting systems can simulate human presence when residents are away. This not only enhances comfort but also contributes to energy efficiency, leading to potential cost savings in utility bills.

Home Automation II offers enhanced security features as well. Smart locks, surveillance cameras, and motion detectors can all be integrated into the home’s network. This allows homeowners to monitor their property remotely, receive security alerts, and even grant access to visitors through mobile apps. Biometric security options, such as facial recognition, are also becoming more common, adding an extra layer of protection.

Furthermore, energy management technologies are a hallmark of Home Automation II. Smart plugs and sensors monitor energy use, providing insights to homeowners about how to reduce consumption. Advanced systems can even automate energy distribution, shifting usage to off-peak hours to alleviate strain on local grids and maximize efficiency.

Finally, voice control has become a prominent feature in Home Automation II, allowing users to operate devices hands-free. Integration with voice-activated platforms like Amazon Alexa, Google Assistant, and Apple Siri adds another layer of convenience, making it easy to control multiple aspects of the home with simple voice commands.

In conclusion, Home Automation II represents a significant step forward in creating intelligent spaces that are responsive to the needs of their users. Through the integration of cutting-edge technologies, enhanced security measures, energy management, and intuitive control options, the concept of a smart home is evolving into a more accessible and efficient reality.
Top Page Image Contents