Home Automation II owner manual Buttons

Page 31

Enter the Scene number (1-256) followed be the ' # ' key.

SCENE 1

0=OFF 1=ON 2=SET

Scene Set Command

The Scene Set command is used to set up Scenes for a lighting group. Set the desired lighting level for each of the units in the lighting group for the first Scene. The desired lighting level may be set manually at the switch, or by a command issued from the controller. After the desired lighting levels are set, press the 2 (SET) key to save the first Scene for that group. Commands are sent to each of the four units in that group to instruct each unit to save its current lighting level as the lighting level for the Scene. Repeat these steps to set up each of the remaining three Scenes for that lighting group.

Scene On Command

Once the Scenes have been set up, press the 1 (ON) key to command the four units in that Scene to return to the lighting level set by the Scene Set command for that Scene.

Scene Off Command

Once the Scenes have been sent, press the 0 (OFF) key to command the four units in that Scene to turn off.

Notes:

1.When sending Scene Commands, the controller must be configured to allow Extended Code transmissions on each House Code affected by a Scene.

2.The Scene Commands always apply to a group of four consecutive units, which are units 1-4, 5-8, 9-12, and 13-16 on a particular house code. You must address the units accordingly so that the desired units fall into the appropriate lighting groups.

3.The actual Extended Code Scene commands use a "group reference" that matches that sent by a Leviton Wall-Mounted Scene Controller set to the same address as the first unit in the lighting group. This allows wall-mounted controllers to be easily used for manual Scene selection.

Buttons

A powerful feature of the OmniPro II is the ability to program Buttons. A Button (also known as macro) is a number on the keypad that is programmed to execute a series of commands when it is pressed. Buttons are used to program functions that are specific to your home and lifestyle.

Using a button, you can activate several commands at once. You can personalize 128 buttons with descriptive names. The following are some examples of programmed Buttons:

Leave for Work (Button 1):

-turn off all lights

-set thermostat to energy saving settings

-arm the security system in the Away mode

Go to Bed (Button 2):

-turn off all lights

-dim outdoor lights 20% to extend bulb life and reduce consumption

-arm security in Night mode

Dinner for Two (Button 3):

-dim the dining and living room lights

-turn on the porch light

-turn off all the bedroom lights

-dim the den light

-turn on the stereo

Page 23

Page 30 Page 32
Image 31
Page 30 Page 32
Contents Home AUTOMATION, INC Copyright 2001-2003 Home Automation, Inc All Rights Reserved Contents Control Telephone Control Page Instructions to Called Party Fire Escape PlanningPage Underwriters Laboratories UL Listing IntroductionModel Number Serial Number Console Operation Overall DescriptionDisplay Menus Normal Top-Level DisplayTo silence the beeper, press the * key Error BeepsMain Menu Trouble BeepsConfirmation Beep OmniPro II MaintenanceCancel Areas= OFF Disarming the Security System and Silencing AlarmsSecurity System Operation Arming the Security System= Vacation Using Shortcut Keys= Night DLY Night Delay = NightRestoring Zones = RestoreQuick Arm Bypassing ZonesBurglar ALARM! Zone Name Tripped What To Do When You Come HomeWhat Happens When the Alarm is Activated Burglar Alarm ActivatedGas Alarm Activated Fire Alarm ActivatedEmergency Keys Alarm Reset Duress Code Entered or Duress Alarm ActivatedAlarm Cancel Codes Trouble IndicationsMaster Code Manager Code Panic SwitchesDuress Code Area ArmingGoto Area Testing Your System Modules Control CommandsALC Switch Modules ControlUnit Numbers House CodesScrolling Through Names Dimming and Brightening Controlling UnitsLighting Level Ramp Command Timed CommandsScene Command Compose All On / Off Status of a UnitInternal Flags Controlling OutputsScenes Leviton Scene ControlButtons HAI RC-Series Thermostats Temperature ControlIf hold mode is On, Hold is shown Programmable Energy Saver Modules PESMs Important Notes Freeze AlarmsHumidity Temperature AlarmsOutdoor Temperature Temperature Control of AppliancesStatus Through Show Events Event LogClear Text Messages MessagesRecord Memo Message Play Memo MessageSay Message Show MessageLog Message Clear MessageSend Message Pro-Link Remote Phones Telephone ControlTelephone Interface In-House PhonesMain Menu Phone Access Denied Remote LockoutTemperature Status Event Phone GOOD-BYE Cancel Repeat Alternate MethodButton TemperatureControl SecurityHeat Setting Cool Setting Timed # Status * Cancel When an HAI Communicating Thermostat is enteredHold # Status Cancel When a Programmable Energy Saver Pesm is enteredPlaying and Recording a Message MessagePlaying and Recording a Custom Phrase Panic Button over the Phone # # # # # # Good-ByePlaying and Recording the Address How the OmniPro II Voice Dialer Works Emergency Dial-OutDigital Dialer Voice DialerWhat You Hear If Your OmniPro II Calls You PC AccessEntering the Code OmniPro II Ethernet Connections Connecting to Network via PC AccessBuilt-In Ethernet Port Controller IP Address, Port Number, and Encryption Key192.168.0.101 Hub or HAI OmniPro IIRouter Controller Dynamic DNSLocal / Wide Area Network Configuration and Advanced Control Programming ACP SetupSet Up Codes Duress Code Set Up Time= Add Programs Advanced Control Programming ACP= Show Programs Otherwise, a help screen is displayed = Delete All Programs Edit ProgramsEdit Programs When Edit When 1=TIMED 2=BUTTONTimes Programs Security Mode Event Buttons Control Unit Event / ALC Switch Press Event ButtonsButton and Event Programs Zone Event Buttons All On/Off Event Buttons Alarm Event ButtonsEvent Buttons Message Event Buttons Pro-Link Miscellaneous Event ButtonsProgram Control Commands Edit Program CommandProgram Security Commands Program Message Commands Program Button CommandsProgram All On / All Off Commands Program Temperature CommandsProgram Zone Conditions Program Security Mode ConditionsEdit Program Condition Program Control ConditionsProgram Other Conditions Program Time Clock ConditionsSet Up Dial Dial Order Dial Out NumberDial OUT 1 on Dial OUT 1 OFF Dial Out NumbersSet Up Arming Set up Miscellaneous Format Number Description Time Clock 1 on Time Clock 1 OFF House Codes 2-16 X-10 All OffHouse Codes 2-16 X-10 All On Time ClocksZone Name Latitude, Longitude, and Time ZoneDaylight Savings Controller IP Address Number DescriptionController Port Number Encryption Key Set Up NamesSet Up Address Set Up VoiceFire Escape Planning Underwriters Laboratories RequirementsHome AUTOMATION, INC Powell Street Suite a NEW ORLEANS, LA Federal Communication Commission NoticeIf YOU have Trouble with Your Phones Canadian Industry Canada NoticeOmniPro II Voice Dial-Out Planner Appendix a Dial OUT PlannerPress 9. The system will say Good-bye and hang up Instructions to Called PartyCode Char Appendix B Text Description Character CodesSpace Code Description Appendix C Voice Description CodesLower FaultFall HelloService SafetySwitch TemperatureVCR VolumeVault PhrasePage

II specifications

Home Automation II represents the next evolution in smart home technology, providing users with greater flexibility, convenience, and security through advanced features and integrated systems. This smart home revolution focuses on the seamless interaction of devices and the automation of daily tasks, ultimately enhancing the overall living experience.

One of the key features of Home Automation II is interoperability among a wide range of devices. This enables homeowners to control lights, thermostats, security cameras, and other appliances from a single platform. Whether through smartphones, tablets, or voice-activated assistants, users can easily manage their home environment, monitor energy consumption, and receive real-time notifications. This level of integration not only simplifies operation but also creates a more cohesive smart home ecosystem.

Another significant aspect of Home Automation II is the use of artificial intelligence and machine learning. These technologies learn a homeowner’s habits and preferences, allowing the system to adapt automatically. For example, the thermostat can adjust temperatures based on the time of day and occupancy patterns, while lighting systems can simulate human presence when residents are away. This not only enhances comfort but also contributes to energy efficiency, leading to potential cost savings in utility bills.

Home Automation II offers enhanced security features as well. Smart locks, surveillance cameras, and motion detectors can all be integrated into the home’s network. This allows homeowners to monitor their property remotely, receive security alerts, and even grant access to visitors through mobile apps. Biometric security options, such as facial recognition, are also becoming more common, adding an extra layer of protection.

Furthermore, energy management technologies are a hallmark of Home Automation II. Smart plugs and sensors monitor energy use, providing insights to homeowners about how to reduce consumption. Advanced systems can even automate energy distribution, shifting usage to off-peak hours to alleviate strain on local grids and maximize efficiency.

Finally, voice control has become a prominent feature in Home Automation II, allowing users to operate devices hands-free. Integration with voice-activated platforms like Amazon Alexa, Google Assistant, and Apple Siri adds another layer of convenience, making it easy to control multiple aspects of the home with simple voice commands.

In conclusion, Home Automation II represents a significant step forward in creating intelligent spaces that are responsive to the needs of their users. Through the integration of cutting-edge technologies, enhanced security measures, energy management, and intuitive control options, the concept of a smart home is evolving into a more accessible and efficient reality.
Top Page Image Contents