Samsung DVD-P181/XEL Reference, Firmware upgrade, Update procedure, How to make an upgrade disc

REFERENCE

Firmware upgrade

Introduction

Samsung will often support the software upgrade to improve the performance of this unit to the lat- est status, trough the samsung Internet Site (www.samsung.com)

2.Press enter or play to start upgrade.

-Press any other key to cancel upgrade back to Samsung logo and eject the disc.

Upgrade file detected

Curent version: 07.12.15.00

Upgrade ?

Press Play to start

File copying

Firmware upgrade stars

English

Because the specially new mpeg4 codec contin- ues to appear more often. What improvements are made depends on the software upgrade you are using as well as the software that your DVD- player contained before the upgrade.

Upgrade file detected Curent version: 07.12.15.00 Upgrade ?

Press Play to start Upgrade

Firmware upgrade stars

How to make an upgrade disc

Write the downloaded file onto a blank CD-R or CD- RW disc, using the following settings:

1.Download the upgrade trough the Download center of Samsung Internet Site (http://www.samsung.com).

2.Write the file to disc using CD-RW driver of your computer.

Note

-File system CD-ROM

-Chracteer set ISO 9660

-Finalized, single session

-Write speed low

Update procedure

1.Open the disc tray. Place disc the on the tray. close the tray. The Firmware Upgrade screen appears.

Upgrade file detected

Curent version: 07.12.15.00

Upgrade ?

Press Play to start

-In the middle of the writing, the tray will open automatically. After taking out the disc, please wait for about 2 minutes.

-If the unit was successfully updated, the unit will turn off and on after closing the tray automatically. When the unit turns on, this screen will display.

SELECT MENU LANGUAGE

Press	1	for English
Touche	2	pour Français
Drücken Sie	3	für Deutsch
Pulsar	4	para Español
Premere	5	per Italiano
Druk op	6	voor Nederlands

3.Press the number buttons to select the desired language

Note

-If the “Select Menu Language” doesn’t appear, please contact the “Samsung Service Center.

-If the unit was successfully updated, the unit will turn off and on after closing the tray automatically.

-Do not press any button or unplug the power cord during upgrade.

-The upgrade procedure may change, refer to the web site( www.samsung.com)

Firmware upgrade

appears on the display

25