Samsung LH43PMHPBGC/EN manual External connection, Checkpoints, Cable Connection,  RS232C Cable

Page 19

Chapter 2. Device setup

External connection

Checkpoints

Before connecting a source device, read the user manual provided with it. The number and locations of ports on source devices may differ from device to device.

Connect the sound ports correctly: left = white and right = red.

Check the types of ports at the back of the product you want to connect. The appearance may differ depending on the product.

WARNING

Do not connect the power cable until all connections are completed. Connecting the power cable during connection may damage the product.

Cable Connection

RS232C Cable

Interface

RS232C (9 pins)

 

 

Pin

TxD (No.2), RxD (No.3), GND (No.5)

 

 

Bit rate

9600 bps

 

 

Data bits

8 bit

 

 

Parity

None

 

 

Stop bit

1 bit

 

 

Flow control

None

 

 

Maximum length

15 m (only shielded type)

 

 

Pin assignment

1 2 3 4 5

6 7 8 9

Pin Signal

1Detect data carrier

2Received data

3Transmitted data

4Prepare data terminal

5Signal ground

6Prepare data set

7Send request

8Clear to send

9Ring indicator

RS232C cable

• Connector: 9-Pin D-Sub to Stereo Cable

61

9-P1- 5

19

3

2

1

-P2-

Image 19
Contents  PM43H / PM49H / PM55H Table of contents Troubleshooting About this manual SymbolsCopyright Safety precautions SafetyElectricity and safety Children may suffocate InstallationChildren may become injured or seriously harmed OperationProduct may fall and become damaged or cause an injury StoragePrecautions when handling the panel CleaningInstallation Device setupWhat’s Included Remote sensor PartsPanel key Remote sensor and spacer logo optionalSpacer logo optional Reverse sideRJ45 Anti-theft lockTo lock an anti-theft locking device Port DescriptionVOL Remote controlTo place batteries in the remote control Ventilation Guided installationInstallation on a perpendicularwall Installation on an indented wallWall mount kit specifications Vesa Wall mount installationPreparing before installing wall mount Installing the wall mountDevice setup  RS232C Cable External connectionCheckpoints Cable ConnectionDirect LAN cable PC to HUB LAN CableCross LAN cable PC to PC Connection Viewing control state Get control commandControlling Set control command Control CodesPower control CommandInput source control Volume controlSetting the picture size Set Picture Size Screen mode controlSetting the input source Set Input Source Viewing screen status Get Screen Mode StatusViewing PIP on/off state Get the PIP ON/OFF Status Screen size controlPIP On/Off control Viewing the screen size Get Screen Size StatusVideo Wall Mode Control Auto adjustment control PC and BNC onlyFull Natural Safety LockSetting the video wall Set Video Wall Mode Viewing the safety lock state Get Safety Lock StatusVideo Wall User Control Video Wall OnSet Number Data 0x01 0x02 0x63 100 0x64 10x10 Video Wall Model 1 ~Connection using a D-SUB cable Analog type Connection using a DVI cable Digital typePC connection  Sound → set Hdmi Sound to Pcdvi Connection using an HDMI-DVI cable System → General → set Hdmi Hot Plug to Off Connection using an DP cable Connection using an Hdmi cablePrecautions for using DP ‒‒ Sound → set Hdmi Sound to Avhdmi AV connectionAudio system connection Connection using an Hdmi cable up to 1080pEdit LAN connectionSource selection SourceUninstallation Installation/uninstallationPC software Multiple Display Control Connection Using the RS-232C cableUsing the ethernet cable Connection using a direct LAN cableConnection using a cross LAN cable Home → Player → Viewing contentHome screen PlayerAvailable menu When content is runningFile formats compatible with Player Control buttons on the remoteRestrictions Template files and LFD.lfd filesContents Image Power PointVideo AudioSupported in Network Channel and Local Channel Template filesClone Product URL Launcher SettingSchedule URL LauncherPC Connection Cable ID SettingsDevice ID Device ID Auto SetNetwork Status Video WallVideo Wall On/Off Timer Picture ModeOn Timer  Off / On Off TimerTicker Home → Ticker →Approving a connected device from the server Select Edit  Setup Select Time Zone Setting the current timePicture Screen adjustment2nd 3rd Picture Mode MenuWhen this setting is on, only UHD products are supported Hdmi Black Level Film ModeAuto Adjustment Image ResetPicture Off Reset PictureImmediate display OnScreen display adjustmentTimer OnScreen Display2nd 3rd Description Language Set the menu language Audio receiver. If this occurs, set the product to External Sound adjustmentIf Sound Output is set to External, Auto Volume is disabled SoundNetwork NetworkNetwork Connecting to a Wired Network Network Settings WiredHow to set up manually Automatic Network Settings WiredManual Network Settings Wired How to set up automaticallyConnecting to a Wireless Network Network Setting WirelessAutomatic Network Setup Wireless How to set up using Wpspbc Manual Network Setup WirelessSelect Add Network System SystemMessage to On Power Control Auto Power OnAuto Power Off Power ButtonEco Solution Energy Saving Mode No Signal Power OffUSB Auto Play Lock Security Safety LockChange PIN Button LockLogo Display Time Game ModeReset System Custom LogoSystem menu Troubleshooting forAnynet+Anynet+ HDMI-CEC Anynet+ HDMI-CECProblem Possible Solution Anynet+ device Support SupportDiagnosis TroubleshootingScreen Resolution Before you contact usScreen issue Installation issue PC mode Not Optimum Mode is displayed Adjust Brightness and Contrast Go to Sound and change Sound Output to Internal Sound issueSource device issue Remote control issueOther issue Defined resolution is not supported. appears Question Answer How can I change the frequency? Frequently asked questionsAppendix SpecificationsGeneral Plug-and-Play MAC, 832 x Standard signal mode tableModel Name PM43H / PM49H / PM55H Synchronization MAC, 640 xVESA, 1280 x VESA, 800 xVESA, 1024 x VESA, 1152 xNot a product defect Product damage caused by customer’s faultOthers Prevention of afterimage burn-in What is afterimage burn-in?Optimum picture quality and afterimage burn-in prevention Optimum picture qualityOZ348 2030 UA102 2110 Preventing afterimage burn-inOpen Source Licence Notice License
Related manuals
Manual 87 pages 34.06 Kb Manual 2 pages 10.02 Kb Manual 84 pages 39.01 Kb Manual 106 pages 12.52 Kb Manual 2 pages 39.22 Kb Manual 2 pages 16.2 Kb Manual 106 pages 22.27 Kb Manual 106 pages 58.74 Kb Manual 106 pages 7.27 Kb Manual 88 pages 21.91 Kb Manual 90 pages 50.83 Kb Manual 86 pages 23.28 Kb Manual 86 pages 15.51 Kb Manual 87 pages 15.41 Kb Manual 86 pages 18.98 Kb Manual 87 pages 3.86 Kb Manual 87 pages 37.06 Kb Manual 87 pages 12.94 Kb Manual 91 pages 30.21 Kb Manual 87 pages 35.2 Kb

LH55PMHPBGC/CH, LH43PMHPBGC/CH, LH49PMHPBGC/UE, LH49PMHPBGC/EN, LH43PMHPBGC/EN specifications

Samsung has established itself as a leader in display technology, and its range of professional displays, including the LH55PMHPBGC/EN, LH43PMHPBGC/EN, and LH49PMHPBGC/EN models, exemplify the brand's commitment to innovation and quality. These displays are designed to meet the diverse needs of businesses, offering an exceptional viewing experience, durability, and versatility for a variety of applications.

The Samsung LH55PMHPBGC/EN is a 55-inch display that integrates a robust set of features designed for high-performance usage. Its ultra-bright panel ensures visibility in various lighting conditions, making it ideal for retail environments, conference rooms, and other public spaces. This model supports a wide viewing angle, allowing audiences to experience consistent image quality from different positions. Coupled with Samsung's proprietary technology, this display delivers vibrant colors and deep contrast ratios, elevating any content being showcased.

Similarly, the LH43PMHPBGC/EN model boasts a 43-inch screen, catering to areas where space is at a premium without sacrificing display quality. This model is engineered for continuous operation, making it suitable for environments that require constant visual engagement. Its compact size does not hinder its performance; it maintains the same high brightness levels and color accuracy as its larger counterparts, ensuring a captivating viewing experience.

The LH49PMHPBGC/EN sits between these two sizes with a 49-inch display, striking an ideal balance for medium-sized spaces. This model also features the same advanced picture technology, providing stunning visuals that capture the audience's attention. All three models utilize Samsung's MagicINFO software, enabling easy content management and scheduling, further enhancing their usability in business settings.

In terms of connectivity, these displays come equipped with multiple input options, allowing for seamless integration with various devices, including computers, media players, and streaming devices. They are built with durability in mind, featuring a robust design that can withstand the demands of professional use.

In conclusion, the Samsung LH55PMHPBGC/EN, LH43PMHPBGC/EN, and LH49PMHPBGC/EN displays showcase cutting-edge technology tailored for commercial applications. Their impressive features, including high brightness, wide viewing angles, and reliable software support, make them versatile solutions for advertisers, educators, and corporate environments eager to communicate their message effectively. These models represent Samsung’s dedication to providing high-performance products that enhance visual communication and engagement across various industries.