SET ZONE AREA
Press [ENTER] at the “SET ZONE AREA...” position to enter the PRIVACY ZONE setup screen. Control PAN/TILT/ZOOM to select 4 apexes of the PRIVACY ZONE area and the rectangular PRIVACY ZONE area will be completed.
SET ZOOM
Press [ENTER] at the “SET ZOOM...” position to enter the ZOOM setup screen. After ZOOM setup, the PRIVACY ZONE function will be in action only at the higher magnification than the Zoom magnification
as set.
PRIVACY ZONE SET 0
SET ZONE AREA | ON... |
SET ZOOM | ... |
REVERSE | OFF |
➜
Press [Enter]
PRIVACY ZONE P/T 1
●
➜
After P/T/Z
control, press
[ENTER]
PRIVACY ZONE SET 0
SET ZONE AREA | ON... |
SET ZOOM | ... |
REVERSE | OFF |
➜
Press [Enter]
SET ZOOM
E
EXITQUIT
EXITQUIT
PRIVACY ZONE P/T 2
●
➜
After P/T/Z
control, press
[ENTER]
PRIVACY ZONE P/T 3 |
● |
REVERSE
The REVERSE function applies PRIVACY MASK to the other area than set as a privacy zone. ON/OFF is available.
PRIVACY ZONE SET 0
SET ZONE AREA | ON... |
SET ZOOM | ... |
REVERSE | ON |
➜
After P/T/Z
control, press
[ENTER]
PRIVACY ZONE P/T 4 |
● |
EXITQUIT
EXIT
"QUIT" : Does not save the selected information and returns to a higher menu.
❈For the safer privacy protection, select about 10 % more than the actual size to hide when you set up the PRIVACY ZONE area.
❈4 points of PRIVACY ZONE area are in the middle of the screen. Therefore, when the tilt is positioned at upside limit(0° or 180°), PRIVACY ZONE cannot be set in the area which is displayed above center.
❈If the points becomes X shape, it means PRIVACY ZONE cannot be set due to the size limitation.
"SAVE" : Do saves the selected information and returns to a higher menu.
"DEL" : Deletes the selected information and restores the DEFAULT. Then returns to a higher menu.
ZONE DIR SET/ZONE AREA SET
This function indicates the ID or direction depending on the set value when PAN of
EAST), E(EAST),