For items in the BLC menu, the user can set the size and location of the BLC area by pressing [ENTER] key after put the cursor on USER… using the [Left, Right] key. For SIZE items, you can use the [Up, Down, Left, Right] key to designate the SIZE, and then press the [ENTER] key.
You can set the location for areas using the [Up, Down, Left, Right] key in the LOCATION.
(VIDEO SET) |
| |
|
| |
IRIS |
| MANU... |
SHUTTER | OFF | |
AGC | OFF | |
WHITE BAL | ATW1 | |
DIS | OFF | |
FOCUS MODE | ONEAF | |
Press the
ENTER button.
(MANUAL)
(ALC)
➜
SIZE
SPECIAL | ... |
EXIT | QUIT |
LEVEL | (00) |
RET |
|
BLC | USER... |
LEVEL | (0) |
RET |
|
SIZE |
|
Press [Enter]
➜
Press [Enter]
LOCATION
SIZE
SHUTTER
You may designate both the fast electronic shutter speed and low electronic shutter speed in the SHUTTER menu. The fast electronic shutter supports 7 shutter speeds from 1/100(1/120) to 1/10K second to be used for the bright and fast video image. The AUTO slow electronic shutter supports 10 shutter speeds from x2 to x160 and sets the shutter speed to be slow In order to make the image on the screen more distinct and brighter when you photograph under dark illumination. If you want to sense the light brightness to control the shutter speed to the brightness automatically, select the AUTO slow shutter.
(VIDEO SET) |
|
IRIS | ALC... |
SHUTTER | OFF |
AGC | OFF |
E
LOCATION | LOCATION |
Use [Left, Right] key in the LEVEL menu to control the video output level(brightness).
WDR
The WDR camera is a
WHITE BAL | ATW1 |
DIS | OFF |
FOCUS MODE | ONEAF |
SPECIAL | ... |
EXIT | QUIT |
Keep pressing both Left and Right in the SHUTTER menu, the speed will change in the following sequence.
➝ OFF ➝ AUTO X2 ➝ AUTO X4 ➝ AUTO X6 ➝ AUTO X8 ➝ AUTO X12 ➝ AUTOX16 ➝ AUTO X20 ➝ AUTO X40 ➝ AUTO X80 ➝ AUTO X160 ➝ OFF ➝ 1/100(1/120) ➝ 1/250 ➝ 1/500 ➝ 1/1000 ➝ 1/2000 ➝ 1/4000 ➝ 1/10K 
|
| (VIDEO SET) |
|
| |
|
|
|
| ||
|
|
|
|
| |
|
| IRIS |
| WDR... |
|
|
| SHUTTER | OFF |
| |
|
| AGC | OFF |
| |
|
| WHITE BAL | ATW1 |
| |
|
| DIS | ON |
| |
|
| FOCUS MODE | ONEAF |
| |
|
| SPECIAL | ... |
| |
|
| EXIT | QUIT |
| |
|
|
|
|
|
|
|
|
|
|
|
|
➜
Press [Enter]
(WDR)
LEVEL1 | I | H | |
LEVEL2 | I | H | |
RET |
|
|
|
❈ In case the IRIS mode is set to WDR, only the following modes are |
available. |
➝ OFF ➝ AUTO X2 ➝ AUTO X4 ➝ AUTO X6 ➝ AUTO X8 ➝ AUTO X12 ➝ |
AUTOX16 ➝ AUTO X20 ➝ AUTO X40 ➝ AUTO X80 ➝ AUTO X160 |
❈ If you set SHUTTER to between AUTO X4... and AUTO X128..., FOCUS mode will be |
displayed as “MF“ (the product can operate only in MF mode). You can ’t adjust the |
settings manually. If you set it to OFF, 1/100(1/120)/10K or AUTO X2..., the product |
will recover the previous FOCUS mode. |
❈ If you set SHUTTER to between AUTO X2... and AUTO X128..., DIS will be displayed |
-LEVEL 1 : Controls the shutter speed while WDR operates.
-LEVEL 2 : Controls the whole brightness while WDR operates.
MANU
When you press [ENTER] key after selecting MANU in the IRIS item, an additional screen appears in which you can set manually opening or closing the IRIS.
as |
set it to OFF or 1/100(1/120)/10K, the product will recover the previous settings of DIS. |
FLICKERLESS
Either NTSC (for 50 Hz)or PAL (for 60 Hz areas)is an