Samsung HT-H5550/TK, HT-H5550W/TK, HT-H5500/EN, HT-H5550W/EN, HT-H5550/EN Wireless Network, Wpspbc

6.Repeat Steps 4 and 5 until you have filled in all parameters.

✎You can get the network parameter values from your Internet provider.

7.When finished entering all the parameter values, select Return ('), and then press the E button. The home cinema verifies the network connection and then connects to the network.

Wireless Network

You can set up a wireless network connection in three ways:

-Wireless Automatic

-Wireless Manual

-WPS(PBC)

Before you configure the wireless network connection, disconnect any wireless network devices currently connected to the product or, if applicable, the product's current wired connection.

Wireless - Automatic

Follow the Steps 1 to 3 in "Configuring Your Network Connection". (See page 20)

1.In the Network Settings screen, change Network Type to Wireless. The product searches for and then displays a list of the available networks.

Network Settings

4.When finished, select Done, and then press the E button. The product verifies the network connection and then connects to the network.

✎You should be able to find the security code or pass phrase on one of the set up screens you used to set up your router or modem.

Wireless - Manual

If you have a static IP address or the Automatic procedure does not work, you'll need to set the Network Settings values manually.

Follow the Steps 1 to 3 in "Configuring Your Network Connection". (See page 20)

1.	In the Network Settings screen, change
	Network Type to Wireless. The product
	searches for and then displays a list of the
2.	available networks.
	Scroll through the list, select the desired network
3.	or Add Network, and then press the E button.
	If you selected a network in Step 2, go to Step 6.
4.	If you selected Add Network, go to Step 4.
	Enter your wireless network or wireless router's
	name.
	• Enter numbers directly using the number
	buttons on your remote control.
	• Enter letters by selecting a letter with the
	▲▼◄► buttons, and then pressing the E
	button.
	• To display capital letters (or redisplay lower
	case letters if capital letters are displayed),

Settings

Select your network type.

Network Type Wireless

Wireless network

si-ap

MIC

KIMING_VTOWER

You can connect your BD Home Theater to the internet. Please select which wireless network to use.

select , and then press the E button.

• To display symbols and punctuation, select

123#&, and then press the E button. To

redisplay letters, select 123#&, and then press

the E button.

When finished, select Done, and then press the

WPS(PBC) Search

m Move " Select ' Return

2.Select the desired network, and then press the E button.

3.On the Security screen, enter your network's security code or pass phrase.

Enter numbers directly using the number buttons on your remote control. Enter letters by selecting a letter with ▲▼◄► buttons, and then pressing E button.

Ebutton.

5.On the Security method screen that appears, use the ▲▼ buttons to select the network's Security method, and then press the E button. On the next screen, enter your network's security code or pass phrase.

•Enter numbers directly using the number buttons on your remote control.

•Enter letters by selecting a letter with the ▲▼◄► buttons, and then pressing the E button.

21 - English