Appendix
Symptom |
| Check/Remedy |
No HDMI output. | • Check the connection between the TV and the HDMI jack of the product. | |
| • | Check if your TV supports 576p/480p/720p/1080i/1080p HDMI input resolution. |
Abnormal HDMI output | • | If random noise appears on the screen, it means that TV does not support HDCP |
appears on the screen. |
| |
DLNA function |
|
|
You can see folders shared | • DLNA shows only Photo, Music, and Movie files. It does not display other kinds of | |
through DLNA, but cannot |
| files. |
see the files. |
|
|
Video plays intermittently. | • | Check if the network is stable. |
| • | Check if the network cable is properly connected and if the network is overloaded. |
The DLNA connection | • | IP addresses under the same subnetwork should be unique, otherwise IP collision |
between the TV and PC is | • | can cause an unstable connection. |
unstable. | Check if you have a firewall enabled. | |
|
| If so, disable the firewall function. |
|
|
|
The home cinema cannot | • Test whether the network connection is active by using the Network Status | |
connect to the | • | function. |
server. | Check whether a USB memory device is connected to the product. | |
| • | The memory device must have at least 1GB of free space to accommodate the |
|
|
|
| • | You can check the available size in BD Data Management. (See page 40) |
| See if the | |
| • | If all above fails, contact the contents provider or update to the latest firmware. |
When using the | • The USB memory device must have at least 1GB of free space to accommodate | |
service, an error occurs. |
| the |
|
| You can check the available size in BD Data Management. (See page 40) |
✎When the factory default settings are restored, all stored user BD data is deleted.
Hereby, Samsung Electronics, declares that this Home Cinema System is in compliance with the essential requirements and other relevant provisions of Directive 1999/5/EC.
The official Declaration of Conformity may be found at http://www.samsung.com, go to Support > Search Product Support and enter the model name.
This equipment may be operated in all EU countries.