\\ If you want to change the resolution in BD Wise mode, you must set BD wise mode to Off in advance.
\\ BD Wise will be disabled if the product is connected to a device that does not support BD Wise.
Resolution
Sets the output resolution of the HDMI video signal. The i and p indicate interlace and progressive scan, respectively.
•576p(480p), 720p, 1080i, 1080p, BD Wise
NOTE
\\ The BD Wise menu item appears only if BD Wise is set to On.
\\ Depending on your TV, certain HDMI output resolutions may not work. Please refer to the user’s manual of your TV.
\\ If Composite is connected, the resolution supports only 576i(480i).
\\ 1080P may not appear depending on TV.
HDMI Format
Lets you set the colour space format for the HDMI output to match the capabilities of the connected device (TV, monitor).
Video Out Signal
Different countries apply different TV standard. You can select from NTSC or PAL.
Audio
Simple Setup
It is the Function for selecting the Speaker Layout suitable with the layout type of the connected Speaker. That is two path to select:
1. Settings Audio Simple Setup
2.Settings System Initial Setting Simple Speaker Setup
•Normal Mode: Use this option when the surround speakers are located behind you.
•Simple Mode: Use this option if the surround speakers are located in front of you.
\\ If Simple Mode is selected, Speaker Setting cann't be set.
Speaker Setting
Speaker Size
You can set the Speaker Size of the Center and Surround Speakers, as well as Test Tone in this mode.
Sound Edit
You can adjust the balance and level for each speaker.
Press the ▲▼ buttons to select and adjust the desired speaker.
Press the ◄► buttons to adjust the settings.
Delay Time
If the speakers cannot be placed at equal distances from the listening position, you can adjust the delay time of the audio signals from the Center and Surround speakers.
You can also set the Test Tone in this mode. NOTE
\\ The Delay Time menu will be activated only when a 5.1 channel source is played.
\\ You can not set Center and Surround in this mode when their Speaker Size is set to NONE.
\\ With
\\ The Center channel is only adjustable on 5.1 channel discs.
Test Tone
Use the Test Tone feature to check the speaker connections.
•Press the ◄► buttons to select On.
•The test tone will be sent to Front Left Center Front Right Surround Right Surround Left Subwoofer in order.
To stop the test tone, press the v button.
DRC (Dynamic Range Compression)
This feature balances the range between the loudest and quietest sounds. You can use this function to enjoy Dolby Digital sound when watching movies at low volume at night.
AUDIO SYNC
Video and audio sync may not match with digital TV. If this occurs, adjust the audio delay time to match the video.
Speaker Selection
•Video is transmitted over the HDMI connection cable only, and audio is output through the product speakers only.
Select the Home Theater.
•Both video and audio signals are transmitted over the HDMI connection cable, and audio is output through your TV speakers only.
Select the TV Speaker.
04 Settings
English 15