Basic Functions
V SURROUND
V SURROUND
It is only operational when 2 Channel Audio is playing. It will change 2 channel Audio Source to 5.1 channel Sound and there is output.
Each time you press the
Virtual Surround on Virtual Surround off
•Virtual Surround on: change 2 channel audio to 5.1 channel and there is Sound output by 5.1 channel.
•Virtual Surround off: Output of 2 channel Audio is Sound output by 2 channel. (Original Sound).
TV SOUND
TV SOUND
You can listen via Home Theater Speaker or TV Speaker with TV SOUND button.
1 . Connect the HDMI cable to TV and Home theater. 2 . Press the TV SOUND button on the remote control.
3 . Each time you press the TV SOUND button, TV SOUND ON/OFF flashes shortly on the Display part on the Front panel, then change to D.IN.
ĞĞUse in this case:
1)If you want to listen to the sound via home theater speaker when you watch a TV.
2)If you want to listen to the sound from the USB media that plugged to the TV via home theater speaker.
ĞĞTV SOUND ON/OFF support specification
Connected | TV Anynet+ | TV | TV | |
| Sound | Sound | ||
TV | ||||
Setting | ON | OFF | ||
| ||||
|
|
|
| |
Anynet+ | ON | O | O | |
|
|
| ||
supported | OFF | O | O | |
TV | ||||
|
|
| ||
|
|
|
| |
Anynet+ |
|
|
| |
No opeartion | O | O | ||
supported | ||||
|
|
| ||
TV |
|
|
| |
|
|
|
|
\\Make sure that D.IN function is changed to TV CEC ON state,otherwise ARC audio is not available .
Listening to Radio
Using buttons on the Remote Control
1 . Press the FUNCTION button to select FM. 2 . Tune in to the desired station.
•Preset Tuning 1 : You must first add a desired frequency as a preset. Press the 5 button to select PRESET and then press the TUNING/CH (,.) button to select the preset station.
•Manual Tuning : Press the 5 button to select MANUAL and then press the TUNING/CH (,.) button to tune in to a lower or higher frequency.
•Automatic Tuning : Press the 5 button to select MANUAL and then press and hold the TUNING/ CH (,.) button to automatically search the band.
Setting Mono/Stereo
Press the MO/ST button.
•Each time the button is pressed, the sound switches between STEREO and MONO.
•In a poor reception area, select MONO for a clear,
Presetting Stations
Example : Presetting FM 89.10 in the memory 1 . Press the FUNCTION button to select FM.
2 . Press the TUNING/CH (,.) button to select <89.10>.
3 . Press the TUNER MEMORY button.
•Number flashes on the display.
4 . Press the TUNING/CH (,.) buttons to select preset number.
•You can select between 1 and 15 presets.
5 . Press the TUNER MEMORY button again.
•Press the TUNER MEMORY button before number disappears from the display.
•Number disappears from the display and the station is stored in memory.
6 . To preset another station, repeat steps 2 to 5.
20 English