DIGITAL ZOOM
You may set up the digital zoom magnification ratio in the DIGITAL ZOOM menu. The magnification ratio ranges from OFF to 10. If you set Digital Zoom of
BLC (Submenu of the ALC menu)
If you use a general camera to photograph a subject under backlight or bright illumination, the subject will be shown dark on the monitor due to the backlight. BLC(Back Light Compensation) is used to prevent such a backlight problem to secure distinct images under bright illumination.
Using the [Left, Right] keys, you can set up BOTTOM…, TOP…, LEFT…, RIGHT…, CENTER… 5 preset areas and the USER…function that can directly set the areas. For example, for the items in the BLC menu, you
(CAMERA SET) |
|
CAMERA ID | OFF |
INT |
(CAMERA SET) |
|
CAMERA ID | OFF |
INT |
can confirm the preset BOTTOM area by pressing [ENTER] key in the BOTTOM… status.
E
COLOR/BW | BW... |
MOTION DET | OFF |
ZOOM SPEED | 3 |
DIGITAL ZOOM | OFF |
EXIT | QUIT |
COLOR/BW | BW... |
MOTION DET | OFF |
ZOOM SPEED | 3 |
DIGITAL ZOOM | X10 |
EXIT | QUIT |
(VIDEO SET) |
| |
|
| ALC.. |
IRIS | ||
SHUTTER | X4 | |
MOTION | NORM | |
WHITE BAL | ATW1 | |
DIS | OFF | |
FOCUS MODE | ONEAF | |
SPECIAL | ... | |
EXIT | QUIT | |
➜
Press [Enter]
(ALC)
BLC OFF
LEVEL
RET
EXIT
The EXIT menu is used to quit the CAMERA SET menu of the
- QUIT | : Ignores the changed information and restores the saved |
| information. |
- SAVE | : Saves the information of the setting condition of the menu. |
-PRESET: Ignores the changed information and restores the initial factory defaults of the menu.
(ALC) |
BLC | BOTTOM... |
LEVEL | |
RET |
|
➜
Press [Enter]
2. VIDEO SET MENU
IRIS
There is a function to automatically adjust IRIS to the incoming light level. Owing to this function, you may set up the brightness level yourself.
The ALC(Auto Light Control) menu allows you for video output level setup. The WDR(Wide Dynamic Range) menu allows you to set up the WDR level and the FLICKERLESS function.
ALC
Choose the ALC of the IRIS item and press [ENTER] and set he submenu to the Video Output level and BLC will be shown.The Video Output Level can be set in the level item using the [Left, Right] keys.
For items in the BLC menu, the user can set the size and location of the BLC area by pressing [ENTER] key after put the cursor on USER… using the [Left, Right] key. For SIZE items, you can use the [Up, Down, Left, Right] key to designate the SIZE, and then press the [ENTER] key.
You can set the location for areas using the [Up, Down, Left, Right] key in the LOCATION.