Samsung WW60K42138W/EO, WW60K42109W/EO manual Flooring, Water temperature, Alcove installation

Page 18

Installation

Installation

Flooring

For best performance, the washing machine must be installed on a solid floor. Wood floors may need to be reinforced to minimize vibration and/or unbalanced loads. Carpeting and soft tile surfaces are not a good resistance to vibrations and may cause the washing machine to move slightly during the spin cycle.

CAUTION

Do NOT install the washing machine on a platform or a poorly supported structure.

Water temperature

Do not install the washing machine in areas where water may freeze as the washing machine always retains some water in its water valves, pumps, and/or hoses. Frozen water left in the connection parts may cause damage to belts, the pump, and other components of the washing machine.

Alcove installation

Minimum clearance for stable operation:

Sides

25 mm

 

 

Top

25 mm

 

 

Rear

50 mm

 

 

Front

550 mm

 

 

If both the washing machine and a dryer are installed in the same location, the front of the alcove must have at least a 550 mm unobstructed air opening. Your washing machine alone does not require a specific air opening.

18  English

Untitled-11 18

3/23/2017 8:41:08 PM

Image 18
Contents Washing Machine WW70K4*****/WW60K4Contents Troubleshooting SpecificationsSafety information Important safety precautions Critical installation warnings English 7  Installation cautions Critical usage warningsEnglish 9  Usage cautions English 11  Safety information Critical cleaning warnings Instructions about the Weee Installation What’s includedSpanner Bolt caps Hose guide Water supply Installation requirementsElectrical supply and grounding DrainWater temperature Alcove installationFlooring Step-by-step installation Select a locationRemove the shipping bolts Adjust the levelling feet Connect the water hoseEnglish 21  Untitled-11 23/2017 84110 PM English 23  Power on Position the drain hoseLaundry guidelines Initial settingsBefore you start Run Calibration recommendedPrewash if necessary Empty pocketsUse a laundry net Determine the load capacityApply a proper detergent type Detergent drawer guidelines To apply washing agents to the detergent drawer Before you start Operations Control panelPress to activate/deactivate the Bubble Soak function. This Simple steps to start To change the cycle during operationCycle overview Standard cyclesWool Options Delay End Special features AddWashEnglish 39  Settings Child LockSound On/Off Maintenance Eco drum cleanSmart Check Emergency drain Cleaning Surface of the washing machineAdd Door Mesh filter Pump filter Detergent drawer Recovery from freezing Care against an extended time of disuseTroubleshooting CheckpointsTroubleshooting Change as the automatic temperature control feature checks Troubleshooting Information codes Troubleshooting AC6 Specifications Fabric care chartProtecting the environment Specification sheet English 59  Specifications Information of main washing cycles Memo Memo Questions or COMMENTS? Country Call Or Visit US Online AT