Samsung VCR8950L3B/XEF manual About the Battery, Battery and will run for about 100 minutes

Page 119

 

• When the product is initially purchased, it will take about 180 minutes to fully charge the

NOTE

battery and will run for about 100 minutes.

When charging the battery while the battery is over-heated, the charging time can increase.

Measures to take when charging is not smooth.

When the vacuum cleaning robot cannot be automatically charged, check the following:

-Turn the Power Switch at the bottom of the vacuum cleaning robot off and on.

-Re-plug the power of the charger.

-Check whether there are any foreign substances on the charge connector and wipe the charge connector on the main unit and the charger with a dry cloth.

-Check whether there are objects near the charger that are strong refl ectors.

When separating the vacuum cleaning robot from the charger, it will discharge naturally.

-Charge the vacuum cleaning robot through the charger, if possible. (When leaving your home unattended for a long period of time due to a business trip, travelling etc., turn off the Power Switch of the vacuum cleaning robot and unplug the power of the charger to store them.)

About the Battery

The vacuum cleaning robot is powered by an environment-friendly Lithuim-ion (Li-ion) rechargeable battery, and an over-charge prevention function guarantees an extended life time.

The battery warranty period is 6 months from the date

of purchase.

When purchasing a battery, ask the customer care center

for the genuine part symbol () and model number before purchasing it.

-This battery is only for Samsung vacuum cleaning robot. It is strictly prohibited to use it for other appliances or for other purposes.

-Do not disassemble or modify the battery.

-Charge it in a location with good ventilation.

-Do not expose the battery to fi re and do not heat it.

-Do not connect any metallic objects to the (+) or (-) terminals of the battery.

-Keep it indoors (0°C~40°C).

-Before you discard product, dispose of batteries in an environmentally safe manner.

-Do not discard this batteries with your regular household trash.

-Follow all local regulations when disposing of old batteries.

If the battery is out of order, do not disassemble it. Contact your nearest customer care center.

An increased charging time and a shorter battery life indicates the near end of the battery life. Please contact an authorized customer care center to replace your battery.

The rechargeable battery incorporated in this product is not user replaceable.

For information on its replacement, please contact your service provider.

03 OPERATING

operating _23

Image 119
Contents Robot aspirapolvere Altri Simboli Utilizzati Informazioni sulla sicurezzaInformazioni Sulla Sicurezza Simboli DI AVVERTENZA/ATTENZIONE UtilizzatiBase DI Ricarica Informazioni Importanti Sulla SicurezzaInformazioni Generali Robot Aspirapolvere Informazioni Sulla Sicurezza IndiceDanneggiarlo AlimentazioneOperazioni Preliminari Cavo di alimentazione a terra Modalità di pulizia programmataRobot aspirapolvere Dellaspirapolvere sia in posizione di spegnimento OffAl robot aspirapolvere di caricarsi automaticamente Installare la base di ricarica in una posizione facilmenteAccessibile al robot aspirapolvere Non installare la base di ricarica su pavimenti scuriUSO Di tanto in tanto, pulire tali aree manualmente Pulizia E ManutenzioneNon spostare il robot aspirapolvere afferrandolo dalla Spazi tra i divani e le paretiAssistenza Varie Modalità DI Pulizia Caratteristiche del prodottoComoda Funzione Virtual Guard Pulizia Delicata DI Ogni AngoloOstacoli Auto RicaricaSpazzole Rotative Laterali PER LA Pulizia DEI Bordi Superamento Delle Soglie Delle PorteVirtual Guard Filtro di ricambio Montaggio dellaspirapolvereComponenti Unità principale Nomenclatura Delle PartiVirtual Guard Installazione delle batterieInstallazione delle batterie del telecomando Pannello del display Parti DEL DisplayParte Pulsanti Accensione e spegnimento Installazione DEL Robot AspirapolvereOrdine dinstallazione Funzionamento dellaspirapolvereDal robot aspirapolvere Installazione della base di ricaricaInstallare la base di ricarica su una superfi cie piana Controllare lo stato di carica del robot aspirapolvere Ricarica in corsoLa spia di ricarica diventa verde Informazioni sulla batteria Impostazione orario Formazione di una barriera virtuale Installazione di Virtual GuardFunzionamento pulsanti Priorità superiore Informazioni sul sensore IrDAAvvio o arresto della pulizia Utilizzo DEL Robot AspirapolvereAvviare/Interrompere la pulizia Accensione e spegnimentoRicarica Annullare la Pulizia automaticaSequenza di Configurazione Impostare la ModalitàModalità Turbo Pulizia SpotAnnullare la Modalità Annullare la Pulizia MaxFunzionamento Impostare la modalità Annullare la modalità Pulizia manualePulsante sul telecomando Telecomando Programmazione del timerProgramma settimanale Modalità di pulizia Auto o Premere il pulsante Y o ZPer impostare la modalità di PuliziaModalità Dust Sensor Sensore polvere Funzioni AggiuntiveUso delle funzioni aggiuntive Modalità TurboPulizia della spia del sensore e della telecamera Manutenzione strumenti e fi ltriPulizia DEL Robot Aspirapolvere Rispettare i metodi di pulizia e manutenzioneDopo la pulizia con acqua Pulizia della vaschetta di raccolta polvere e dei filtriSpazzola Pulizia della spazzola principaleStuzzicadenti o cotton fi oc Manutenzione Pulizia delle ruote di guida Anomalia Checklist Misure correttive Risoluzione dei problemiChecklist Prima DI Contattare Lassistenza La durata della Non è in grado diTrovare la base di Supera la VirtualRisoluzione DEI Problemi Mediante Codici DI Errore Articolo Unità principaleBase di ricarica Stazione Copyright c 2006, 2008, 2009, 2010 Edward Rosten Open Source AnnouncementPage Robo-Sauger Sicherheitsinformationen Symbole DER GEFAHREN-/WARNHINWEISEWeitere Verwendete Symbole SicherheitsinformationenAKKU-LADESTATION Wichtige Hinweise ZUR SicherheitAllgemein ROBO-SAUGER Betrieb DES Geräts InhaltMit nassen Händen NetzanschlussBrechen kann Entfernen Sie Schmutz und Wasser vom NetzsteckerVOR Inbetriebnahme Nicht, den Robo-Sauger über den Hauptschalter auszuschalten Oder später mit der StartzeitvorwahlStellen Sie sicher, dass Kinder nicht auf den Robo-Sauger Womöglich aufsaugt Sauger gut zugänglich istSauger automatisch geladen wird Im Bereich der Ladestation, d.h ,5 m seitlich und 1 m nachHauptschalter aus und rufen Sie das Kundendienstzentrum an Beim BetriebStellen Sie keine Gegenstände auf den Robo-Sauger Vorsicht Andernfalls besteht die Möglichkeit von StörungenZusammengebaut werden Reinigung UND WartungReinigen Sie diese Stellen bitte gelegentlich selbst Dies kann zu schwersten Schäden am Gerät führenGezogen ist Der Reinigungsbürste entfernenErsetzen Verschiedene Reinigungsmodi GerätemerkmaleMehr Bequemlichkeit Durch DIE Virtual GUARD-FUNKTION Gründliche EckenreinigungKollisionsschutz AutomatikbetriebRotierende Seitenbürsten Überquerung VON TürschwellenErsatzfilter Übersicht über das GerätBestandteile DES Geräts Robo-Sauger Fernbedienung Ladestation Weiteres ZubehörSauger Bezeichnungen DER TeileBatterien einsetzen Automatikmodus Einsetzen der Batterien für die FernbedienungAnzeige AnzeigeTastenbereich Ein- und Ausschalten am Hauptschalter Betrieb des GerätsInbetriebnahme DES ROBO-SAUGERS Anweisungen zur InbetriebnahmeStellen Sie das Ladegerät auf einer ebenen Fläche auf Installieren der LadestationAufl aden LadenInformationen zum Akku Konfiguration Einstellen der UhrzeitEinstellen eines Zaunes virtuelle Wand Einstellen des Virtual GuardBedienung der Tasten Funktionieren Die Übertragung der Infrarotsignale ist im FreienInformationen zum IrDA-Sensor Starten und Anhalten des Robo-Saugers Betrieb DES ROBO-SAUGERSEin- und Ausschalten des Robo-Saugers Ein- und Ausschalten des GerätsAufladen Reinigens nicht aktiviert Automatisches SaugenInformationen zum Fortsetzen des Saugprozesses Wenn der Robo-Sauger feststellt, dass die ReinigungPunktsaugen Modus beenden MaximalsaugenModus einstellen Modus einstellen Modus beenden Manuelles SaugenTasten auf der Fernbedienung Einstellungen löschen TimeoutStartzeitvorwahl FernbedienungFernbedienung Konfiguration WocheneinstellungWählen Timer/Weekly. DrückenUm den Reinigungsmodus Oder WiederholmodusBetrieb mit Staubsensor SpezialfunktionenVerwenden von Spezialfunktionen TurbomodusFenster der Absturzsensoren Fenster der hinteren Sensoren Reinigen DES ROBO-SAUGERSHinweise zu Reinigung und Wartung Reinigen der Sensorfenster und der KameraNach dem Reinigen mit Wasser Reinigen des Staubbehälters und der FilterEntleeren Sie vor dem Reinigen den Staubbehälter Reinigen DER Hauptbürste Wartung Hinweis Reinigen der Antriebsräder Fehlersuche Checkliste ZUR SelbsthilfeStörung Checkliste Maßnahme Die Laufzeit der NichtKann den Virtual Guard passierenAn der Geräteunterseite aus und entfernen Fehlercodes UND FehlerbehebungFehlercode Ursache Fehlerbehebung 350 mm Robo-SaugerLadestation BezeichnungOpen Source Announcement Page Vacuum Cleaning Robot Other Symbols Used Safety informationSafety Information General Important Safety InstructionsBattery Charger Vacuum Cleaning Robot Contents This may result in fi re or electric shock Power RelatedDo not use a damaged power cord, plug, or a loose power Material such as Open all doors to clean all roomsBefore USE Always keep the power cord of the charger plugged into Remove objects scattered on the floor before cleaningMake sure that there is no trace of liquids on the charger Vacuum cleaning robotMake sure the vacuum cleaning robot does not vacuum or This may result in damage to carpets You cannot use the vacuum cleaning robot on thick carpetsThis may result in damage when the unit accidentally drops USECleaning and Maintenance Edge-cleaning side What is ceiling shape recognition Visionary mapping plus? Product featuresDelicate Cleaning of Every Corner Various Cleaning ModesDoorsill Crossing EDGE-CLEANING Side Rotating BrushSafety Device Auto ChargingSpare Filter Assembling the cleanerMain Body Remote Control Charger Station Others Components ComponentsMain unit Name of Each PartBack Installing the batteriesInstalling the Remote Control Batterise Display panel Display PartButton Part Turning the Power Switch on or off Operating the cleanerInstalling the Vacuum Cleaning Robot Installation orderVacuum cleaning robot Installing the chargerInstall the charger on a fl at surface Charging Battery warranty period is 6 months from the date Purchase About the BatteryBattery and will run for about 100 minutes Remote Control Setting the TimeForming a Fence virtual wall Installing the Virtual GuardButton operations About the IrDA sensor When controlling the vacuum cleaning robotStarting or stopping cleaning Using the Vacuum Cleaning RobotStarting/Stopping Cleaning Turning the power on or offPress the Recharging button RechargingButton Auto CleaningSet the mode About the Resume Cleaning functionSpot Cleaning Complete, resume cleaning is not performed Max CleaningCancel the mode Turbo icon is turned on, you can start cleaning in Turbo Manual CleaningRemote control button Remote Control Configuration Sequence Timer ReservationWeekly Reservation Cleaner exits reservation setting mode Repeat cleaning modeSettings are completed After the settings areAdditional Functions Using additional functionsTurbo Mode Dust Sensor ModeMaintain tools and fi lters Cleaning the Vacuum Cleaning RobotPlease keep the cleaning and maintenance methods in mind Cleaning the Sensor Window and the CameraAfter cleaning it with water Cleaning the Dust Bin and the FiltersFirst, empty the dust bin before cleaning it Cleaning the Power Brush Picks or cotton swabs Cleaning the Edge-Cleaning Side rotating Brush Cleaning the Driving Wheel Symptom Checklist Measure to Take TroubleshootingChecklist Before SVC Calls Time of the Virtual Battery usageCharger Virtual GuardError Code Cause Solution Troubleshooting for Error CodesSpecifications Main BodyChargerStation Classification Open Source Announcement Page Robotski sesalnik Drugi Uporabljeni Simboli Varnostne informacijeVarnostne Informacije Uporabljena Simbola ZA OPOZORILO/POZORPolnilnik Baterije Pomembna Varnostna NavodilaPred Uporabo Robotskega Sesalnika Preberite VSA Navodila SplošnoRobotski Sesalnik Uporaba Sesalnika VsebinaNapajalnega vtiča odstranite morebitni prah ali vodo NapajanjeTo lahko povzroči požar ali električni udar Pred Uporabo Izključen Pred sesanjem odstranite vse predmete, ki so razmetani poČe se robotski sesalnik zaleti v otroke, lahko padejo Njim ne bo ovir ali stopnic Dostopal do njegaNe more samodejno polniti Poskrbite, da 0,5 m levo in desno od polnilnika ter 1m predTo lahko povzroči okvaro MED UporaboČe izdelek pade na tla, se utegne poškodovati Na robotski sesalnik ne postavljajte predmetovRedno čistite nečistočo, ki se nabere na senzorjih za ovire Čiščenje in VzdrževanjeRazredčilo ali alkohol Uporaba neoriginalnih baterij povzroči okvaro izdelka Nasprotnem lahko pride do požara ali električnega udaraRazlični Načini Sesanja Značilnosti izdelkaPriročna Funkcija Navideznega Čuvaja Temeljito Sesanje Vseh VogalovPreprečevanje Trčenj Samodejno PolnjenjeStranska Vrtljiva Krtača ZA Sesanje Robov Prečkanje PragovDodatni filter Čistilna krtača Sestava sesalnikaSestavni Deli Glavna enota IME Posameznega DelaNazaj Navidezni ČuvajSesanje po urniku/ tedensko sesanje Namestitev baterij v daljinski upravljalnikNadzorna plošča ZaslonGumbi Vklop ali izklop stikala za napajanje Uporaba sesalnikaNamestitev Robotskega Sesalnika Vrstni red namestitveDostopal do njega Namestitev polnilnikaPolnilnik namestite na ravno površino Njim ne bo ovir ali stopnicPolnjenje Garancijska doba baterije je 6 mesecev od datuma Nakupa BaterijaDelovala približno 100 minut Daljinski upravljalnik Nastavitev časaPostavitev navidezne stene Namestitev Navideznega ČuvajaDelovanje gumbov Pri upravljanju robotskega sesalnika z daljinskim Senzorju IrDAZagon ali zaustavitev sesanja Uporaba Robotskega SesalnikaZagon/ustavitev sesanja Vklop ali izklop napajanjaUporaba gumbov Prekličite način Samodejno sesanjeUpravljalnika Nastavite načinObičajni način Sesanje območjaPrekličite način Maksimalno sesanjeKo pritisnete gumb Turbo, se na nadzorni plošči Ročno sesanjeGumb daljinskega Upravljalnika Potek nastavitve Nastavite način Prekličite načinČasovna omejitev Sesanje po urnikuDaljinski upravljalnik Potek nastavitve Preklic nastavitevTedenski urnik Nadaljujete lahko s korakom Izberete lahko samodejniNačin ali način ponovitve Ko so nastavitve zaključeneTurbonačin Izbira zvočnega signalaDodatne Funkcije Uporaba dodatnih funkcijČiščenje okenca senzorja in kamere Vzdrževanje nastavkov in fi ltraČiščenje Robotskega Sesalnika Upoštevajte načine čiščenja in vzdrževanjaPo čiščenju z vodo Čiščenje posode za prah in filtrovPred čiščenjem izpraznite posodo za prah Čiščenje zmogljive krtače Vzdrževanje Čiščenje stranske vrtljive krtače za sesanje robov Čiščenje pogonskega kolesca Znak Preverite Rešitev Odpravljanje težavKAJ JE Treba PREVERITI, Preden Pokličete Serviserja Čas delovanja baterij ZnakRobotski sesalnik ne najde polnilnika Odpravljanje Težav S Pomočjo KOD Napak Gumb na dotik Osrednja enotaPolnilnik postaja Klasifikacija Element Open Source Announcement Memo Memo Memo Memo DJ68-00633B REV0.0
Related manuals
Manual 196 pages 29.33 Kb Manual 144 pages 60.57 Kb Manual 240 pages 44.01 Kb Manual 48 pages 50.9 Kb Manual 48 pages 59.47 Kb