confi guration mode
Registering Presets
➀Set up <Preset duration>.
Set up the time to wait until moving to the next preset.
➁Adjust the camera for preset setting.
•Up/down/left/right:
Move the camera to up, down, left and right directions.
•Zoom
•Focus
➂In <Preset ID>, select a preset number to be registered.
➃Click <Save>.
The confi gured camera position is registered as preset as the selected number. Set up the other presets by repeating step 1 to step 4.
Deleting Presets
➀To delete one preset: Select a preset number to be deleted and click <Delete>.
➁To delete all presets: Click <Delete all preset> to delete all the registered presets.
Setting PTZ Camera Options
Click <PTZ Option>.
When an event occurs, the camera moves according to the linked preset.
➀ Select an event type to link to camera preset.
Available options
• Motion: Set a preset to be linked to motion detection.
•Sensor: Set a preset to be linked to a sensor.
•Alarm: Set a preset to be linked to an alarm occurrence.
➁Select motion, sensor and alarm channels to be linked to the preset camera.
➂Select a camera to be linked with preset.
You can only select a camera for which PTZ protocol is set in the camera setup.
➃Select a preset number for the camera selected in step 3.
➄Select return position of the camera after completing the preset operation.
➅The camera will be returned to the return position when the confi gured <Duration(Sec)> has elapsed Available options: 05, 10, 20, 30, 40, 50, 60 Sec.
➆If you click <Apply to all>, the current settings are applied to the presets of all the cameras. In this case, the settings are applied to the presets of all the cameras.
①
②
③
④
①
②
③
④
⑤
⑦
⑥
48_ confi guration mode