TROUBLE SHOOTING
WARNING
To avoid risk of electrical shock, personal injury or death; disconnect power to dryer before servicing, unless testing requires power.
3-WIRE system connections
A.External ground connector
B. Neutral grounding wire (green/yellow)
C. Center
D. Earth wire
E. strain relief
1.Loosen or remove the center terminal block screw.
2.Connect the earth wire (white or center wire) of the power cord to the center,
3.Connect the other wires to outer terminal block screws. Tighten screws.
4.Tighten the strain relief screws.
5.Insert the tab of the terminal block cover into your Dryer’s rear panel slot. Secure the cover with a
If converting from a
A.External ground connector
B. Green or bare copper wire of power cord
C. strain relief
D. Center
E. Neutral Grounding wire (green/yellow)
F.Neutral wire (white or center wire)
1.Remove the External ground connector screw.
2.Connect the ground wire (green or unwrapped) of the power cord to the external ground connector screw. If you want to connect B(Green or bare copper wire of power cord) to the Neutral Post without assembling with A(cabinet ground), call the service technician.
3.Loosen or remove the center terminal block screw.
4.Connect the neutral wire (white or center wire) of the power cord and the appliance ground wire (green with yellow stripes) under the central screw of the terminal block.
5.Connect the other wires to the outer terminal block screws. Tighten screws.
6.Tighten the strain relief screws.
7.Insert the tab of the terminal block cover into your Dryer’s rear panel slot. Secure the cover with a
11