(3 ) Chef Pantry
Chef pantry will change to Fish/Meat or Fridge Mode automatically depending on the set fridge temperature.
The Fish/Meat Mode lets you store
fish and meat at its freshest for a short period of time.
To store fi sh or meat for longer, put it into the Cool Select Room and select the “Freezer” or “Soft Freeze” functions.
Chef | • If you set the fridge temperature to | |
Pantry | ||
1~2 °C the Chef Pantry changes to | ||
| ||
| Fish/Meat Mode and the Fish/Meat | |
| icon lights. | |
| The Chef Pantry is set to | |
| Fish/Meat mode. | |
| • If you set the fridge temperature to | |
| 3~7 °C the Chef Pantry changes to | |
| Fridge Mode and the Fridge Icon | |
| turns on. |
( 4 ) | CoolSelect | |
(Hold 3 sec for Reset Filter) | ||
| ||
| • The CoolSelect button lets you set | |
| the Cool Select Room on the bottom | |
| right of your refrigerator to one of | |
| four settings: Freezer, Soft Freezing, | |
| Chill, or Cool. | |
| • To reset the water fi lter life indicator. | |
| After you replace the water fi lter, | |
| touch and hold this button for 3 | |
| seconds to reset the water fi lter life | |
| indicator. | |
|
| |
| Touch Freezer to set the Cool Select | |
| Room to the same temperature as the | |
Freezer | freezer. | |
| • Use this setting to keep frozen food | |
| fresh. | |
|
| |
| • Touch Soft Freeze to set the | |
Soft | temperature in the Cool Select Room | |
to | ||
Freeze | ||
This feature helps keep meat and | ||
| ||
| fi sh fresh longer. | |
|
| |
Chill | • Touch Chill to set the temperature of | |
the Cool Select Room to | ||
| ||
|
|
| • Touch Cool to set the temperature of | |
Cool | the Cool Select Room to 2 °C. | |
You can keep water, juice, soft | ||
| ||
| drinks, beer, etc. cold. | |
|
|
Filter
Water filter usage
This icon lights when you need to change the fi lter, usually after the refrigerator has dispensed about 300 gallons of water (after about 6 months).
The icon will blink red for several seconds when you open or close the door.
After you install the new water fi lter, reset the fi lter indicator by touching and holding the CoolSelect/hold 3 sec for Filter Reset button for 3 seconds.
•If water is not dispensing or dispensing slowly, you need to replace the water fi lter because the water fi lter is clogged.
•Some areas have large amounts of lime in their water, which causes the water fi lter to clog more quickly.
OPERATING
English - 27
2015. 8. 26. 10:38 |