the size of the room in which the appliance may be sited depends on the amount of refrigerant used.
-Never start up an appliance showing any signs of damage. If in doubt, consult your dealer.
The room where the refrigerator will be sited must be 1 m³ in size for every 8 g of
The amount of refrigerant in your particular appliance is shown on the identifi cation plate inside the appliance.
•Refrigerant squirting out of the pipes could ignite or cause an eye injury.
When refrigerant leaks from the pipe, avoid any naked
flames and move anything
flammable away from the product and ventilate the room immediately.
-Failing to do so may result in fi re or explosion.
-If the appliance contains isobutane refrigerant
When transporting and installing the appliance, care should be taken to ensure that no parts of the refrigerating circuit are damaged.
SEVERE WARNING
WARNING
SIGNS FOR
INSTALLATION
• Do not install this appliance in a humid, oily or dusty location, in a location exposed to direct sunlight and water (rain drops).
-Deteriorated insulation of electrical parts may cause an electric shock or fi re.
•Do not place this refrigerator in direct sunlight or expose to the heat from stoves, room heaters or other appliances.
•Do not plug several appliances into the same multiple power board. The refrigerator should always be plugged into its own individual electrical outlet which has a voltage rating that matched the rating plate.
SAFETY INFORMATION
English - 5
2015. 8. 26. 10:38 |