USING THE DISPENSER
CONTROL PANEL
1 | 3 |
4 | 2 | 5 |
(For Ice·Water model Only) |
( 1 ) | Dispenser Control Panel Lock |
| (3 sec) |
| Touch this button for 3 seconds to turn on |
| Dispenser Control Lock which locks the |
| dispenser and dispenser panel buttons so |
| the buttons can not be used. |
| The Control Lock icon lights up to |
| indicate you’ve activated the Control Lock |
| function. |
| Press 3 seconds to unlock. |
|
|
(2 ) Lighting
Touching this button sets the Dispenser LED lamp (under the display) to continuous mode so that it stays on continuously.
The button also lights up.
If you want the Dispenser lamp to come on only when some one uses the dispenser, touch this button to turn the continuous mode off.
(3 ) Ice Maker (3 sec, On/Off)
To turn off or on the ice maker, touch and hold the Ice Maker button for 3 second. The ‘Off ’ LED lights and the
To turn the ice maker on, touch and hold the Ice Maker button again for 3 seconds. The ‘Off ’ LED turns off.
We recommend you stop ice making if the following occur:
-There is enough ice in the ice
bucket.
-You want to save water and energy.
-Water is not being supplied to the refrigerator.
If the ice maker function is ON, and the water line is not connected, there will be a water valve noise from the back of the unit. If this occurs, touch and hold the Ice Maker button for 3 seconds to turn the ice maker off.
(4 ) Cubed Ice
(5 ) Crushed ice
Touch the Cubed Ice or Crushed ice button to select the type of ice you want dispensed.
Each time you touch the button, the
cubed and crushed ice modes alternate and the Cubed or Crushed ice icon lights up, indicating your selection.
English - 30
2015. 8. 26. 10:38 |