NConnect the Optical cable between the DIGITAL AUDIO OUT (OPTICAL) jack on your TV and the Digital Audio Input on the Home Theatre.
NWhen following the connection above, the Optical jack only outputs 2 channel audio. You will only hear sound from the Home Theatre’s Front Left and Right speakers and the subwoofer. If you want to hear 5.1 channel audio, connect the DIGITAL AUDIO OUT (OPTICAL) jack on the DVD / Satellite Box (ie Anynet Device 1 or 2) directly to the Amplifier or
Home Theatre, not the TV.
NConnect only one Home Theatre.
NYou can connect an Anynet+ device using the HDMI 1.3 cable. Some HDMI cables may not support Anynet+ functions. N Anynet+ works when the AV device supporting Anynet+ is in the Standby or On status.
N Anynet+ supports up to 12 AV devices in total. Note that you can connect up to 3 devices of the same type.
¦Setting Up Anynet+
TPress the TOOLS button to display the Tools menu. You can also display Anynet+ menu by selecting Tools → Anynet+
❑Setup
Anynet+ (HDMI-CEC) → Off / On
To use the Anynet+ Function, Anynet+
NWhen the Anynet+
Auto Turn Off → No / Yes
Setting an Anynet+ Device to turn Off automatically when the TV is Turned Off and setting a TV to turn off automatically when a
NThe active source on the TV remote must be set to TV to use the Anynet+ function.
NIf you set Auto Turn Off to Yes, connected external devices are also turned off when the TV is turned off. If an external device is still recording, it may or may not turn off.
Media Play (USB & DLNA)
Application | Anynet+ |
|
| |
|
|
| ||
| Content Library |
|
| |
| Internet@TV |
|
|
|
| Home Network Centre |
|
| |
|
| Setup |
|
|
| Anynet+ | : On |
| ▶ |
| Auto Turn Off | : Yes |
| |
|
| UMove | EEnter | RReturn |
|
| Setup |
|
|
| Anynet+ | : On |
|
|
| Auto Turn Off | : Yes |
| ▶ |
|
| UMove | EEnter | RReturn |
¦Switching between Anynet+ Devices
1.Press the TOOLS button. Press the ENTEREbutton to select Anynet+
2.Press the ▲ or ▼ button to select Device List, then press the ENTEREbutton. N Anynet+ devices connected to the TV are listed.
N If you cannot find a device you want, press the red button to scan for devices.
3.Press the ▲ or ▼ button to select a particular device and press the ENTEREbutton. It is switched to the selected device.
N Only when you set Anynet+
NSwitching to the selected devices may take up to 2 minutes. You cannot cancel the operation during the switching operation.
View TV
Device List
Recording: DVDR
DVDR MENU
DVDR INFO
Receiver
Setup
UMove EEnter RReturn
NThe time required to scan for devices is determined by the number of connected devices. N When the device scan is complete, the number of devices found are not displayed.
N Although the TV automatically searches the device list when the TV is turned on via the power button, devices connected to the TV may not always be automatically displayed in the device list. Press the red button to search for the connected device.
N If you have selected external input mode by pressing the SOURCE button, you cannot use the Anynet+ function. Make sure to switch to an Anynet+ device by using the Device List.