❑Energy Saving → Off / Low / Medium / High / Auto
This feature adjusts the brightness of the TV in order to reduce power consumption. When watching TV at night, set the Energy Saving mode option to High to reduce eye fatigue as well as power consumption.
T Press the TOOLS button to display the Tools menu. You can also set the Energy Saving option by selecting Tools → Energy
Saving.
❑PIP
For further details on setting up options, refer to page 17.
¦Network Connection
You can set up the Internet Protocol so that you can communicate with various connected networks.
❑Network Connection - Cable
■LAN Connection for a DHCP Environment
The procedures to set up the network using Dynamic Host Configuration Protocol (DHCP) are described below. Since an IP address, subnet mask, gateway, and DNS are automatically allocated when DHCP is selected, you do not have to enter them manually.
1. | Connect the LAN port on the rear panel of the TV and the external modem with a LAN Cable. |
| |
2. | Connect the Modem port on the wall and the external modem with a Modem Cable. |
| |
| The Modem Port on the Wall | External Modem | TV Rear Panel |
|
|
| |
|
| (ADSL / VDSL / Cable TV) |
|
|
| 1 LAN Cable |
|
You can connect the LAN via a Sharer (Router).
The Modem Port on the Wall |
| TV Rear Panel |
External Modem |
| |
| IP Sharer | |
(ADSL / VDSL / Cable TV) |
| |
Modem Cable | LAN Cable | LAN Cable |
You can connect the LAN port and the TV directly depending on your network status.
The LAN Port on the Wall | TV Rear Panel |
| LAN Cable |
NThe terminals (the position of the port and the type) of the external device may differ depending on the manufacturer.
N If the IP address allocation by the DHCP server has failed, turn the external modem off, turn it on again after at least 10 seconds and then try again.
N For the connections between the external modem and the Sharer (Router), refer to the owner’s manual of the corresponding product.
N You can connect the TV to the LAN directly without connecting it through a Sharer (Router)
N You cannot use a